• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.968-970
• /
• 2001

Recently, the power supply equipments have tendency to take multiple feedback loop paths. In this paper the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the gurantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test results. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency $f_c$ is nearly 1/5 of switching frequency $f_s$, from the experimental result with frequency response analyzer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.8
• /
• pp.1255-1259
• /
• 1990

A new ripple analog-to-digital converter (ADC) has been developed. It consists of two parallel ADCs and a switching network. The circuit operates on the analog input signal in two serial steps. First, a coarse conversion is made to determine the most significant bits by the first parallel ADC. The resultant bits control the switching network to connect a series resistor segment, within which the analog signal is contained, to the second parallel ADC. At second step, a fine conversion is made to determine the least significant bits by the second parallel ADC. The circuit requires 2(2\ulcorner\ulcorner1) comparators, 2(2\ulcorner\ulcorner resistors, and 2(2\ulcorner\ulcorner swithches for N-bit resolution.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.93-96
• /
• 1999

Solar cell generate DC power from sunlight whose power is different at any instance according to condition of variables : insolation and temperature. In order to improve the system utility factor and efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under different condition. In this paper, Boost chopper is controlled it output voltage with a new discrete control algorithm for MPPT. PWM signal of DC-DC converter are generated with a 89C51 microcontroller. Switching frequency of DC-DC converter is set at 10KHz. Simulation and experimental results show that the PV system studied in this paper is always operated at maximum power point under different maximum power point of solar cells having stabilized output voltage waveform with relatively small ripple component

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2712-2714
• /
• 1999

The small signal model for input series-output parallel connected converter system employing charge control together with input capacitor voltage feedback loop is developed. From the model developed, the effect of input capacitor voltage feedback loop to the system stability and outer loop compensator design is analyzed. Theoretical results and simulation show that input capacitor voltage feedback loop has no critical effects on the system stability, so the system can be reduced to a equivalent single module for the stability analysis and outer loop compensator design.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2721-2723
• /
• 1999

DC and small-signal ac characteristics are examined for a pulse-width modulated (PWM) dc-dc buck-boost converter with a peak voltage modulation (PVM) feedforward control. Circuit model is used to derive an expression for the output voltage in terms of the input voltage and load resistance. Small-signal circuit model is used to derive the input-to-output voltage transfer function (audiosusceptibility).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.5
• /
• pp.5-13
• /
• 1998

In this paper, a fuzzy controller for DC-DC converters is proposed in order to obtain good performances that can not be achieved by liner control techniques in the presence of wide parameter variz. tions. The presented approach is general and can he applied to any DC-DC converter topologies. While the conventional method uses error and derivative of error, the proposed controller method uses state variables. Such method is very efficient in case of DC-DC converters and can guaranlee both stable small-signal responses and improved large-signal responses. Application results of boost converter(booster) show control potentialities.

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.348-352
• /
• 2017

In this paper, we propose a high resolution A/D converter for a sensor interface that processes low frequency AC signals. A 6b SAR ADC with low power consumption and a 11b incremental ADC with high resolution are combined together to perform 15b resolution. Conventional hybrid ADC has a disadvantage that it can convert t only DC signal, but in this paper, it is possible to convert data to AC signal by increasing input range of incremental ADC. The decimation filter is implemented on-chip. The designed Hybrid ADC operates at supply voltage of 1.8V and consumes the current of 6.98uA. The OSR (oversampling ratio) is 90. And SFDR, SNDR, ENOB and FoMs are 96.59dB, 88.47dB, 14.4-bit and 139.5dB, respectively.

• Tribology and Lubricants
• /
• v.29 no.3
• /
• pp.143-148
• /
• 2013

In this study, several sensor parts used to obtain better signal stability are designed, a separate control circuit for the sensor is developed, and the results obtained using this control circuit are analyzed. The capacitances of the whole sensor system are measured using the control circuit connected to an improved flexible printed circuit board and an asymmetric dual sensor coated with a ceramic material. To realize good discrimination for a small change in the measured capacitance as the engine oil deteriorates, a commercial application-specific integrated circuit is installed on the control circuit as a capacitance-to-digital converter. The absolute error of a measured signal is found to be approximately ${\pm}4fF$.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.571-573
• /
• 1988

A new ripple analog-to-digital converter(ADC) has been developed. It consists of two parallel ADCs and a switching network. The circuit operates on the input signal in two serial steps. First a coarse conversion is made to determine the most significant bits by the first parallel ADC. The results control a switching network to connect the series resistor segment, the analog signal is contained within, to the second parallel ADC. At second step, a fine conversion is made to determine the least signification bits by the second parallel ADC. The circuit requires 2(2$\frac{N}{2}$) comparators, 2(2$\frac{N}{2}$) resistors, and 2(2$\frac{N}{2}$) switches for N-bit resolution.