• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제64권9호
• /
• pp.1281-1287
• /
• 2015

We report the characteristics and differences of two types of attenuation measurement methods for electromagnetic partial discharge signal in GIS. The pulse method is to measure the attenuated waveforms in time domain and coverts them into frequency domain to get the attenuation spectra of given GIS section. This method simulates the real partial discharge signal. The frequency swept continuous wave method can obtain attenuation spectra directly so that it gives attenuation with low noise floor and simplicity. We show that both methods are effective and exchangeable because the attenuation results measured by two methods have similar trends

• Proceedings of the KSME Conference
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.295-298
• /
• 2002

In the analysis of the mass distribution and SMD (Sauter Mean Diameter), planar laser imaging technique Is a convenient and useful one when compared to the mechanical patternator or PDPA (Phase Doppler Particle Analyzer). But for the accurate usage of this laser technique, it is required to compensate the signal attenuation and to find the attenuation coefficients. In the present research, we considered effects of the spray distributions on the attenuation coefficient and improved the accuracy of planar laser imaging technique by the reduction of errors issuing from the signal attenuation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제19권6호
• /
• pp.1149-1157
• /
• 1994

In this case of the mobile communication of vehicles with satellite, the signal at attenuation is due to roadside trees. To analyze this signal attenuation, a roadside tree was modeled as different obstacles of rectangular type and then using Fresnel and Kirchhoff diffraction theory, a formula was derived for signal intensity variation caused by the roadside tree model. The signal attenuation of a roadside tree model was obtained by numerical analysis with variation of the elevation angle, the position and distance between a receiver and a transmitter, and these were compared with experimental results. The results of comparison between theoretical and experimental values show, as expected, the good agreement of the signal attenuation trend.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제9권1호
• /
• pp.89-98
• /
• 2006

This paper describes signal attenuation characteristics as splicing the output on LVDT for stability and reliability of switching mechanism, which is developed to use common signal between FLCC and EDFLCC, on T-50 aircraft. The method of test is classified a Pspice simulation and an actual hardware evaluation. The difference of error margin for two methods is 10times, the latter higher. The result in this experiment shows that the signal attenuation as splicing the output on LVDT doesn't affect and the static error margin is 53% for develope the EDFLCC.

• Journal of electromagnetic engineering and science
• /
• 제4권3호
• /
• pp.119-123
• /
• 2004

This paper presents here the results of the measurements of rain-induced attenuation in the vertically polarized signal propagating at 12.2525 GHz during some rain events, which occurred in the rainy wet season of the year 2001 at Yong-in, Korea(temperate climate). The attenuation measured experimentally was compared with that obtained using the International Telecommunication Union Radio Communication Sector(ITU-R) model, the SAM model and the Global model. In this paper, measured results are in good agreement with the ITU-R prediction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제12권5호
• /
• pp.821-827
• /
• 2008

This paper presents the prediction model of attenuation characteristics of satellite communication signals operating in the range from 1 to 20GHz, associated with the effects of the Asian Dust. And this paper analyze the effects of the Asian Dust in theory that dust particles size and density, OPC, signal levels, exponentail distribution and the permittivity. The prediction model of the dust attenuation was got, combining the formula of the complex dielectric constant of Asian dust. Expressions for specific attenuation and attenuation are derived in terms of the height, visibility. Therefore it make an investigate to the prediction model of attenuation characteristics continuously.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제13권4호
• /
• pp.36-44
• /
• 2009

Spray cross-section was measured by the Optical Line Patternator (OLP) and Optical Tomography at high ambient pressure. The laser line beam passed through the spray region, then Mie scattered signal and transmitted light were captured. The measured signal was processed to obtain a distribution of attenuation coefficient in spray cross-section. Beer-Lambert's law and mathematical reconstruction methods were used to reconstruct the distribution of attenuation coefficient. Spray became dense at high pressure and attenuation of scattered signal occurred seriously. OLP method, which uses Mie scattered signal, showed limit in compensating attenuation problem in dense spray region. Optical tomography reconstructed spray cross-section well, from transmission rate of light penetrating spray region.

• Journal of Sensor Science and Technology
• /
• 제26권3호
• /
• pp.199-203
• /
• 2017

In this paper, we developed an underwater localization system for underwater robot docking using the electromagnetic wave attenuation model. Electromagnetic waves are generally known to be impossible to use in water environment. However, according to the conclusions of the previous studies on the attenuation characteristics in underwater, the attenuation pattern is uniform and its model was accurately proposed and verified in 3-dimensional space via the omnidirectional antenna. In this paper, a docking structure and localization sensor system are developed for a widely used cone type docking mechanism. First, we fabricated electromagnetic wave range sensor transmit modules. And a mobile sensor node is equipped with unmanned underwater vehicle(UUV)s. The mobile node senses the four different signal strength (RSS: Received Signal Strength) from fixed nodes, and the obtained RSS data are transformed to each distance information using the 3-Dimensional EM wave attenuation model. Then, the relative localization between the docking area and underwater robot can be achieved according to optimization algorithm. Finally, experimental results show the feasibility of the proposed localization system for the docking induction by comparing the errors in the actual position of the mobile node and the theoretical position through the model.

• Journal of Biomedical Engineering Research
• /
• 제12권4호
• /
• pp.249-254
• /
• 1991

In the study on the quantitative diagnosis using ultrasound, the stability and precision of tissue characterized parameters are important for the clinical application. We estimate attenuation coefficient introducing homomorphlc process Into the modified spectral differnce method about silicon-madu phantom. We compare the results with those estimated uslng the method used for obtaining the attenuation map image before. Homomorphic process has the effect smoothing the reflected echo signal spectrum, therefore eliminat os the random pattern of the signal spectrum generated by the scatterers. As a result, it Is shown that the stability is enhanced

• Journal of the Institute of Convergence Signal Processing
• /
• 제24권1호
• /
• pp.1-14
• /
• 2023

Underwater images carry information that is useful in the fields of aquaculture, underwater military security, navigation, transportation, and so on. In this research, we transmitted an underwater image through various underwater mediums in the presence of underwater turbulence and beam attenuation effects using a high-speed visible optical carrier signal. The optical beam undergoes scintillation because of the turbulence and attenuation effects; therefore, distorted images were observed at the receiver end. To understand the behavior of the communication media, we obtained the bit error rate (BER) performance of the system with respect to the average signal-to-noise ratio (SNR). Also, the structural similarity index (SSI) and peak SNR (PSNR) metrics of the received image were evaluated. Based on the received images, we employed suitable nonlinear filters to recover the distorted images and enhance them further. The BER, SSI, and PSNR metrics of the specific nonlinear filters were also evaluated and compared with the unfiltered metrics. These metrics were evaluated using the on-off keying and binary phase-shift keying modulation techniques for the 50-m and 100-m links for beam attenuation resulting from pure seawater, clear ocean water, and coastal ocean water mediums.