• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.151-156
• /
• 1991

In this paper, we propose a new algorithm for designing the R-G filter that has optimum performance in terms of mean square sidelobe level(MSSL) for the Barker code. The advantage of the conventional R-G filter lies in its simple structure so that it can be easily implemented. However, the conventional R-G filter dose not have optimum performances in terms of peak sidelobe level(PSL), mean sidelobe level(MSL), and MSSL. Recently, a(R-G)LP filter of which filter coefficients are obtained by the linear programming algorithm was proposed and known to have optimum performance in PSL. The proposed (R-G)LS filter keeps the simple structure of the conventional R-G filter and has the filter coefficients that minimizes the sidelobe in the least square sense. The analytic results show that the proposed (R-G)LS filter has better performances than the conventional R-G filter in terms of PSL, MSL, and MSSL. Compared with (R-G)LP filter, the proposed (R-G)LS filter has better performances in terms of MSL and MSSL. The proposed filter design algorithm can be applied to the other binary codes such as truncated pseudonoise(PN) codes and concatenated codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.39-44
• /
• 1984

Three types of parabolic antenna to reduce the sidelobes and backlobe are compared to determine the best suppressive effect under same conditions which are side rim loading parabilic antenna, flanged prabolic antenna. The hooded parabolic antenna adhered polyurethan form impregnated carbon powder in shows the best shape of suppressed the side back lobes that is 5 to 10 dB suppression of sidelobe and 15dB suppression of back lobe for E-plane.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.1
• /
• pp.21-27
• /
• 2008

In this paper, a PC-based real-time microphone array system with small aperture is presented. The microphone array system is based on the generalized sidelobe canceler (GSC) but it employs a new adaptation mode controller (AMC). The performance of the proposed system was evaluated in the Multimedia Room modeled on an office situation. Evaluation experiments show that the proposed system can perform with stable noise suppression.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1642-1643
• /
• 2011

본 논문은 적응형 알고리즘(Adaptive Algorithm)을 이용하여 재머(Jammer)를 억제하는 것을 기존의 알고리즘을 시뮬레이션으로 확인한다. 본 논문에서는 원하는 방향으로 빔을 형성하는 동시에 특정방향 주로 부엽(sidelobe)으로 들어오는 재머의 신호를 억제시키는데 있어 여러 가지 적응형 알고리즘을 확인하고, 알고리즘을 이용하여 부엽으로 들어오는 재머신호를 어떻게 억제하는지 시뮬레이션을 통해 결과를 확인하도록 할 것이다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.21-25
• /
• 2014

Scan capabilities of Fabry-Perot cavity (FPC) antennas are investigated for the case of a $4{\times}1$ thinned array placed inside the cavity. The FPC array antenna has higher maximum gain and lower sidelobe level (SLL), but the maximum scan angle of the thinned array is 14-17% lower than the patch array alone, due to increased mutual coupling in the FPC structures. However, unlike the bare thinned array, the SLL of FPC array does not suffer from the grating lobe problem even though it has a relative large element spacing of more than $1.0{\lambda}_0$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1059-1068
• /
• 2016

This paper proposes slow wave structure(SWS) utilized to increase antenna gain of printed dipole antenna(PDA) and to suppress sidelobe level simultaneously, and makes sure of electrical characteristics of the antenna according to parameter variations of components of the slow wave structure. The printed slow wave structure which is composed of a dielectric substrate and a metal rods array is located on excited direction of the PDA, affecting the radiation pattern and its intensity. Parasitic elements of the metal rods are arrayed in narrow consistent gap and have a tendency to gradually decrease in length. In this paper, array interval, element length, and taper angle are selected as the parameter of the parasitic element that effects radiation characteristics. Magnitude and phase distribution of the electrical field are observed and analyzed for each parameter variations. On the basis of these results, while the radiation pattern is analyzed, array methods of parasitic elements of the SWS for high gain characteristics are provided. The proposed antenna is designed to be operated at the Wifi band(5.15~5.85 GHz), and parameters of the parasitic element are optimized to maximize antenna gain and suppress sidelobe. Simulated and measured results of the fabricated antenna show that it has wide bandwidth, high efficiency, high gain, and low sidelobe level.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.2
• /
• pp.63-70
• /
• 1996

In this paper, we propose the low sldelobe digital doppler filter bank design algorithm which is practically applicable to coherent radar equipment in complex air-defense system. Using the proposed algorithm, we can obtain a digital doppler filter bank of lower peak sidelobe level and higher clutter suppression capability. In this method, it is possible to achieve higher target-detectability without loss of Target SNR. The proposed algorithms are verified by simulations and experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.720-728
• /
• 2011

In this paper, development of the monopulse secondary surveillance radar antenna which can be used for IFF system is presented. This antenna that is passive linear array is comprised of the row-feeder and several array-elements. The row-feeder provides sum, different and SLS(Sidelobe Supression) channels which are optimized the distribution of the power and phase ratio. The azimuthe sidelobe level of the sum channel beam pattern is -20 dBc or less. The SLS channel covers the sidelobe of the sum-chanel in the whole azimuth angle range. And the difference channel is used to perform the mono-pulse function, improves the detection accuracy in the azimuth direction. Meanwhile, the arrayelement makes shaped beam in the elevation angle, in order to eliminate the clutter and multipath effects from the ground. Performance of the antenna developed is verified by the measurement of S-parameters and far-field beam pattern, and satisfies all of the development specifications well.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1327-1335
• /
• 2012

TPMS (Tire Pressure Monitoring System) is a safety assistant system to prevent the serious accident due to the damaged tire by the abnormal tire pressure. It is designed to transmit the measured data for pressure and temperature of tires from the sensor unit installed in each tire to signal processing unit installed in a vehicle. Based on the received information, a driver monitors the condition of tires using a display device, to maintain the optimum travelling condition. Since TPMS should employ the wireless communication technique, it may suffer from various interferences from external electrical or electronics devices. In order to suppress them, the beamforming techniques such as switching, minimum-variance distortionless-response (MVDR), and generalized sidelobe canceler (GSC) have been considered for TPMS. In this paper, we calculate computational complexities of three beamformers and suggest mathematical basis to compare their performance of the complexity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1025-1033
• /
• 2012

Fabry-Perot cavity(FPC) antennas with artificial magnetic conductor(AMC) surface are designed in order to provide scan capability by $4{\times}1$ array feed inside the cavity. The proposed antenna, excited by $4{\times}1$ thinned array, not only achieve higher directivities but also improve suppression of sidelobe level(SLL) relative to that of the thin array alone. The FPC antenna with the height of a quarter wavelength generate maximum gain of 19 dB, SLL suppression of 14 dB and maximum scan angle of $8^{\circ}$ under the feed phase difference of $90^{\circ}$ at the design frequency of 12 GHz.