• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.2
• /
• pp.193-200
• /
• 2013

PURPOSE: The purpose of this study was to find out variations in body posture by using the baby carrier at the front side and back side. METHODS: Thirty two healthy and young female who will bring up infants and had no musculoskeletal disorders of neck, lumbar and low limb were recruited for this study. They were each marked about ears of tragus, cervical 7th, acromion anterior end, anterior superior iliac spine, posterior superior iliac spine, greater trochanter and lateral malleolus as landmarks to measure variations of body posture when they carry infants at the front side and back side. Landmarks were regarded as the creteria in order to measure NeckFlexion angle(NF), Foreward shoulder angle(FSA), Pelvic tilt(PT), Sway angle(SA), Head displacement(HD) and Scapular displacement(SD). Variations in body posture were measured from the neutral position to the front and back side by using Image J. RESULTS: There were significance level (p<.05) in NF, PT, SA, HD and SD except for FSA in two different side. CONCLUSION: The results of this study indicate that each of the using ways of baby carrier for baby care was influenced postural responses of young women. therefore, it could be considered to apply to women who have abnormal body posture in order to minimize musculoskeletal disorders.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.519-526
• /
• 1996

To investigate the relationship between plane and side drape coefficient, the drape tester designed in which coordinate of projected outline of draped specimen could be recorded. By using this drape tester, the three dimensional shape, plane and side drape coefficient were obtained from coordinate of plane projected shape, and furthermore examined the tendency in changes of drape coefficient in terms of diameter of specimen, deflection angle, and bending rigidity. The side drape coefficients were constant regardless of changes in diameter of specimen. The plane drape coefficients, however, made a little difference according to changes in diameter of specimen. The experimental drape coefficient agreed well with the theoretical drape coefficient according to deflection angle. In the meanwhile, when the plane drape coefficients were regressed with the side drape coefficents, regression equation was $y=0.375x-0.002x^2+6.9\times10^{-5}x^3$. When the $\overline{\theta_s}$ is mean of deflection angle of selected points which have the longest and shortest distance from center point in the node, the theoretical drape coefficient calculated from $\overline{\theta_s}$ has high correlation with experimental drape coefficient. The plane and side drape coefficient changed linearly with increasing the bending length, $\sqrt[3]{EI/w}$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.1
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.4
• /
• pp.357-366
• /
• 2007

The present study investigated local heat/mass transfer characteristics on the surface of the rotating turbine blade with various incidence angles. The experiments are conducted in a low speed annular cascade with a single stage turbine. The blade has a flat tip with the mean tip clearance of 2.5% of the blade chord. A naphthalene sublimation method is used to measure detailed mass transfer coefficient on the blade. At design condition, the inlet Reynolds number is $Re_c=1.5{\times}10^5$ which results in the blade rotation speed of 255.8 rpm. Also, the effect of off-design condition is examined with various incidence angles between $-15^{\circ}$ and $+7{\circ}$. The results indicated that the incidence angle has significant effects on the blade surface heat transfer. In mid-span region, the laminar separation region on the pressure side is reduced and the laminar flow region on the suction side shrinks with increasing incidence angle. Near the tip, the effect of tip leakage flow increases in span wise and axial directions as the incidence angle decreases because the tip leakage flow is formed near the suction side surface. However, the effect of tip leakage flow is reduced with positive incidence angle.

• The Journal of Korean Physical Therapy
• /
• v.28 no.2
• /
• pp.124-127
• /
• 2016

Purpose: The flexor hallucis longus stretch test can determine the shortness of the flexor hallucis longus muscle by measuring the angle of extension in the first metatarsophalangeal (MTP) joint at maximum ankle dorsiflexion. Less than 30 degrees of the first MTP joint at the maximal ankle dorsiflexion indicates shortness of the flexor hallucis longus muscle. The purpose of this study was to examine the intra- and inter-reliability of the flexor hallucis longus stretch test in subjects with asymmetric hallux valgus (HV) angles. Methods: Sixteen subjects with asymmetric HV angles participated in this study. In sitting position, dorsiflexion angles of the first MTP joint were measured with maximum ankle dorsiflexion on each side. ICC (3,1) and ICC (3,k) models were used, respectively, to assess the intra-reliability and inter-reliability of the flexor hallucis longus stretch test. The paired-t test was used to compare the dorsiflexion angle of the first MTP joint on the side with the smaller HV angle with that of the side with the larger HV angle. Results: The results of the study showed that both intra- and inter-reliability were more than 0.95 of the coefficient. Dorsiflexion angle of the first MTP joint was higher on the side with the smaller HV angle. Conclusion: Use of the flexor hallucis longus stretch test is acceptable in clinical settings because both intra- and inter-reliability were high in subjects with asymmetric HV angles. In addition, shortness of the flexor hallucis longus muscle is associated with HV angle. This study provides useful information for use in management of HV deformity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.378-384
• /
• 2014

Trawlers are divided into stern and side types by the method of shooting and hauling net, but the latter is difficult to find beside Korea. In East Sea of Korea, the side type used to be in early 2000's, but it improved to stern type because of its inefficient operating method. The aims of this paper is to make clear the stability of the side trawler in the East Sea, and then confirm whether it satisfy the IMO rule or not, the degree of the transverse inclining angle of the ship when hauling net at hull side. In results, the stability of the ship in initial inclining range satisfied the IMO rule and the domestic rule, but not satisfied those rule in over the range. The limit load of the ship that was coincide with the angle of beam end in hauling net at side was about 26 tons, 18 tons in normal sea condition and storm warning condition respectively. The transverse inclining angles of the ship in hauling net were much higher from 3.3 to 5.5 times than the longitudinal inclining angle of the stern trawler, although those angles were slightly changed with depending on the loading and sea condition.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1577-1579
• /
• 2008

A mixture of two different types of polyimide, one having an alkyl side chain and ordinarily used for homeotropic alignment, and the other without a side chain and ordinarily used for planar alignment, is deposited and baked at high temperatures. When the resulting cell is filled with a nematic liquid crystal, it is found that the pretilt angle is a function of the baking temperature or mixing ratio, and can be controlled continuously over the range 0 to 90.

• Journal of computational fluids engineering
• /
• v.11 no.3 s.34
• /
• pp.22-27
• /
• 2006

Flow around a guided missile in high maneuver, i.e. at a high angle of attack, shows complex phenomena. It is well known that even in geometrically symmetric conditions the flow around a missile at high angles of attack can generate unexpected large side forces and yaw moments due to asymmetric vortices. In this paper, a CFD code (FLUENT) based on the Navier-Stokes equations was used for the numerical analysis to find a suitable numerical mechanism for generation of asymmetric vortices. It is shown that a numerical technique of applying different surface roughness to a specific area of the missile nose surface gives the best fit in comparison with the experimental results. In addition, a numerical investigation of variations of side forces and pressure distributions with angle of attack and roll angle was conducted for the purpose of identifying the source of vortex asymmetries.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.51-62
• /
• 2006

In assessing risks related to working posture, pictures of postures are taken from various directions, which can be a source of observation error. Joint postures of the neck, lower back, knee, shoulder, and elbow were taken from 7 different viewing angles and 19 observers estimated joint angles by observing the pictures in 2-dimensional display. The joint angles were also measured using an optoelectronic motion measurement system. The estimation error increased as the viewing angle varies from the right side of the human body, but the patterns differ according to which joint angles were being observed. Guidelines to increase the validity of observation of joint angles were presented based on the results. In general, it is recommended to maintain the viewing angle within 20 degrees from the right side of the human body, while different ranges of viewing angle are recommended for each joint angle.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.477-480
• /
• 1998

In this paper, we investigated the liquid crystal(LC) alignment and generation of pretilt angle by using photo-alignment techniques on two kinds of polyimide(PI) surface, It was found that the uniform alignment for nematic(N) LC is obtained in a cell with slanted UV light irradiation on PI surface without side chain. We successfully observed that the pretilt angle of NLC is generated about $3^{\circ}$ with an incident angle of 70 degree on the PI surface without side chain. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.