Browse > Article
http://dx.doi.org/10.3795/KSME-B.2007.31.4.357

Effect of Incidence Angle on Turbine Blade Heat Transfer Characteristics (II) - Blade Surface -  

Rhee, Dong-Ho (연세대학교 기계공학과)
Cho, Hyung-Hee (연세대학교 기계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.31, no.4, 2007 , pp. 357-366 More about this Journal
Abstract
The present study investigated local heat/mass transfer characteristics on the surface of the rotating turbine blade with various incidence angles. The experiments are conducted in a low speed annular cascade with a single stage turbine. The blade has a flat tip with the mean tip clearance of 2.5% of the blade chord. A naphthalene sublimation method is used to measure detailed mass transfer coefficient on the blade. At design condition, the inlet Reynolds number is $Re_c=1.5{\times}10^5$ which results in the blade rotation speed of 255.8 rpm. Also, the effect of off-design condition is examined with various incidence angles between $-15^{\circ}$ and $+7{\circ}$. The results indicated that the incidence angle has significant effects on the blade surface heat transfer. In mid-span region, the laminar separation region on the pressure side is reduced and the laminar flow region on the suction side shrinks with increasing incidence angle. Near the tip, the effect of tip leakage flow increases in span wise and axial directions as the incidence angle decreases because the tip leakage flow is formed near the suction side surface. However, the effect of tip leakage flow is reduced with positive incidence angle.
Keywords
Turbine Blade; Blade Tip; Incidence Angle; Heat/Mass Transfer; Tip Leakage Flow;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Kline, S. J. and McClintock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mech. Eng., Vol. 75, pp. 3-8
2 Rhee, D. H. and Cho, H. H., 2006, 'Detailed Heat Transfer Characteristics on Rotating Turbine Blade,' Trans. of the KSME B, in press   과학기술학회마을   DOI
3 Goldstein, R. J. and Cho, H. H. 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434   DOI   ScienceOn
4 Eckert, E.R.G., Sakamoto, H. and Simon, T. W., 2001, 'The Heat and Mass Transfer Analogy Factor, Nu/Sh, for Boundary Layers on Turbine Blade Profiles,' International Journal of Heat and Mass Transfer, Vol. 44, pp. 1223-1233   DOI   ScienceOn
5 Rhee, D. H. and Cho, H. H., 2006, 'Effect of Vane/Blade Relative Position on Heat/Mass Transfer Characteristics on the Tip and Shroud for Stationary Turbine Blade,' Trans. of the KSME B, Vol. 30, No. 5, pp. 446-456   과학기술학회마을   DOI
6 Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass TransferCharacteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (II) ？ Tip and Shroud,' Trans. of the KSME B, Vol. 29, No. 4, pp. 495-503   과학기술학회마을   DOI
7 Rhee, D. H. and Cho, H. H., 2005, 'Effect of Relative Position of Vane and Blade on Heat/Mass Transfer Characteristics on Stationary Turbine Blade Surface,' Fluid Engineering Journal, Vol. 8, No. 4, pp. 27-38   과학기술학회마을   DOI
8 Kwak, J. S., 2006, 'Effect of Blade Tip Geometry on Heat Transfer Coefficients on Gas Turbine Blade Tips and Near Tip Regions,' Trans. of the KSME B, Vol. 30, pp. 328-336   과학기술학회마을   DOI
9 Jin, P. and Goldstein, R. J., 'Local Mass/Heat Transfer on Turbine Blade Near-Tip Surface,' ASME Paper No. GT-2002-30556
10 Kwon, H. G., Lee, S. W. and Park, B. K., 2002, 'Measurements of Heat (Mass) Transfer Coefficient on the Surface of a Turbine Blade with a High Turning Angle Using Naphthalene Sublimation Technique,' Trans. of the KSME B, Vol. 26, pp. 1077-1087   과학기술학회마을   DOI
11 Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (I) - Near-tip Blade Surface,' Trans. of the KSME B, Vol. 29, No. 4, pp. 485-494   과학기술학회마을   DOI
12 Kwak, J. S. and Han, J. C., 2003, 'Heat Transfer Coefficients on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade,' ASME J. of HeatTransfer, Vol. 125, pp. 669-677   DOI   ScienceOn
13 Arts, T., Duboue, J.-M. and Rollin, G., 1998, 'Aerothermal Performance Measurements and Analysis of a Two-dimensional High Turning Rotor Blade,' ASME J. of Turbomachinery, Vol. 120, pp. 494-499   DOI   ScienceOn
14 Blair, M. F., 1994, 'An Experimental Study of Heat Transfer in a Large-scale Turbine Rotor Passage,' ASME J. of Turbomachinery, Vol. 116, pp. 1-13   DOI
15 Chen, P. H. and Goldstein, R. J., 1992, 'Convective Transport Phenomena on the Suction Surface of a Turbine Blade Including the Influence of Secondary Flows Near the Endwall,' ASME J. of Turbomachinery, Vol. 114, pp. 776-787   DOI
16 Goldstein, R. J., Wang, H. P. and Jabbari, M. Y., 1994, 'The Influence of Secondary Flows near the Endwall and Boundary Layer Disturbance on Convective Transport from a Turbine Blade,' ASME Paper No. 94-GT-165
17 Han, J. C., Zhang, L. and Ou, S., 1993, 'Influence of Unsteady Wake on Heat Transfer Coefficient From a Gas Turbine Blade,' ASME J. of Heat Transfer, Vol. 115, pp. 904-911   DOI   ScienceOn