• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.279-283
• /
• 2005

In this study, the ZnS composite powders for host material in phosphor was synthesized in situ by mechanical alloying. As the mechanical alloying time increases, particle size of ZnS decreases. ZnS powders of $1.85\;\mu{m}$ in a mean size was fabricated by mechanical alloying for 10h. The crystal structures of ZnS powders were investigated by X-ray diffraction and the photo-luminescence properties was evaluated with the optical spectra analyzer. The steady state condition of mechanically alloyed ZnS was obtained as a mean particle size of $2\;\mu{m}$ in 5h milling. The sphalerite and wurtize structures coexist in the ZnS mechanically alloyed for 5h. The ZnS powder mechanically alloyed for 10h grows to the sphalerite structure. And the strong emission peaks of ZnS are observed at 480 nm wave length at the powders of mechanically alloyed for 10h, but the sphalerite and wurtize structures in ZnS coexist and emission peaks are not appeared at the powders of mechanically alloyed for 10h.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.240-246
• /
• 2016

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at $950^{\circ}C$ up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form $Al_2O_3$ and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.

• 한국유기농업학회지
• /
• 제19권4호
• /
• pp.553-563
• /
• 2011

This experiment was conducted to determine the effect of nattokinase (NK) additives on milk production and composition, and blood metabolites in dairy cows. The two kinds of nattokinase with high fibrinolytic activity were produced by two strains of bacteria, Bacillus amyloliquefacines (NK1) and Bacillus subtilis (NK2). Total fifteen Holstein cows (average $1.83{\pm}0.37$ parity; average milk yield $23.2{\pm}3.2$ kg/d) were randomly assigned to three treatments (5 animals per treatment). Cows were fed TMR supplemented with 0g, 100g and 100g for control, NK1 and NK2 treatment, respectively for 4 weeks. Milk yield was significantly higher (p<0.05) for NK1 (22.89 kg/d) than for control (21.07 kg/d) and NK2 (21.36 kg/d). Somatic cell counts in NK treatments were significantly lower than that in control group (58,000 vs. 21,000 and 35,000 cells/ml, control vs. NK1 and NK2). Serum ALT levels in all treatment were similar to the range of 32.00~35.83 IU/L, but AST levels in NK1 (85.67 IU/L) was significantly decreased compared with those in control and NK2 (121.67 and 117.67 IU/L respectively). Serum T-CHO levels in NK1 (145.33 mg/dl) was significantly decreased (p<0.05) compared with that in control (179.00 mg/dl) and NK2 (176.17 mg/dl). This finding showed that NK1 additives could possibly have a positive effect in lactation performance of mid-lactation dairy cows by increasing milk yield, reducing somatic cell count, improving liver function and decreasing cholesterol in blood.

• 한국임상수의학회지
• /
• 제22권4호
• /
• pp.408-411
• /
• 2005

Schistosomus reflexus is the most common monstrosity found in cases of bovine dystocia and it occurs mostly in cattle. Caesarian section performed and retracted abnormal foetus from dystocia in Holstein cow. It was the first observed schistosomus reflexus Holstein calf in Korea. The body and chest walls were bent laterally and dorsally leaving the thoracic and abdominal viscera exposed. Clefts of the sternum from part of the defect in which there is, simultaneously, lordosis, dorsal reflection of the ribs and complete eventration of viscera, severe ventral curvature of the spinal column, non-union of the pelvic symphysis and dorsal reflection of the pelvic bones with the occiput of the head lying near the sacrum. The limbs are usually ankylosed. The liver was abnormal in shape and cystic in nature. The lung was smaller and thymus were bigger than those of the normal calf, The ruminant stomach was normal, however, abomasum distended with amnionic fluid. The other organ including heart, spleen and internal organ have normal shape.

• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.271-277
• /
• 2015

As wrought stainless steel, sintered stainless steel (STS) has excellent high-temperature anti-corrosion even at high temperature of $800^{\circ}C$ and exhibit corrosion resistance in air. The oxidation behavior and oxidation mechanism of the sintered 316L stainless was reported at the high temperature in our previous study. In this study, the effects of additives on high-temperature corrosion resistances were investigated above $800^{\circ}C$ at the various oxides ($SiO_2$, $Al_2O_3$, MgO and $Y_2O_3$) added STS respectively as an oxidation inhibitor. The morphology of the oxide layers were observed by SEM and the oxides phase and composition were confirmed by XRD and EDX. As a result, the weight of STS 316L sintered body increased sharply at $1000^{\circ}C$ and the relative density of specimen decreased as metallic oxide addition increased. Compared with STS 316L sintered parts, weight change ratio corresponding to different oxidation time at $900^{\circ}C$ and $1000^{\circ}C$, decreased gradually with the addition of metallic oxide. The best corrosion resistance properties of STS could be improved in case of using $Y_2O_3$. The oxidation rate was diminished dramatically by suppression the peeling on oxide layers at $Y_2O_3$ added sintered stainless steel.

• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.240-246
• /
• 2015

Anodic aluminum oxide (AAO) has been widely used for the development and fabrication of nano-powder with various morphologies such as particle, wire, rod, and tube. So far, many researchers have reported about shape control and fabrication of AAO films. However, they have reported on the shape control with different diameter and length of anodic aluminum oxide mainly. We present a combined mild-hard (or hard-mild) anodization to prepare shape-controlled AAO films. Two main parameters which are combination mild-hard (or hard-mild) anodization and run-time of voltage control are applied in this work. The voltages of mild and hard anodization are respectively 40 and 80 V. Anodization was conducted on the aluminum sheet in 0.3 mole oxalic acid at $4^{\circ}C$. AAO films with morphologies of varying interpore distance, branch-shaped pore, diameter-modulated pore and long funnel-shaped pore were fabricated. Those shapes will be able to apply to fabricate novel nano-materials with potential application which is especially a support to prevent volume expansion of inserted active materials, such as metal silicon or tin powder, in lithium ion battery. The silicon powder electrode using an AAO as a support shows outstanding cycle performance as 1003 mAh/g up to 200 cycles.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• 대한핵의학회지
• /
• 제28권3호
• /
• pp.397-401
• /
• 1994

저자들은 간 스캔상 간 우엽 전반에 걸친 냉소를 보여 공간점유병소로 생각되었던 Budd-Chiari증후군 1예를 경험하였다. 본례는 복부팽만을 주소로 본원 내원하여 시행한 간 스캔상 간 우엽 전반에 걸친 집적감소를 보여 만성 간 질환에 동반된 간 종괴로 생각하였으나 복부 전산화 단층촬영과 자기공명촬영에서 간우엽의 경색이 의심되었다. 자기공명혈관촬영과 초음파 도플러를 시행하였으며 우측 간정맥과 중앙 간정맥폐쇄를 보여 Budd-Chiari증후군으로 진단된 경우이다. 하대정맥의 폐쇄소견은 보이지 않았다. 이를 문헌고찰과 함께 보고하는 바이다.

• 한국축산식품학회지
• /
• 제30권6호
• /
• pp.923-929
• /
• 2010

Colostral whey prepared from colostrum (pooled from first six post-partum milkings) was heated for 10 min at $100^{\circ}C$ Heated colostral whey was incubated with 1% enzymes (protein equivalent basis) for 15, 30, 60, 90, and 120 min at $50^{\circ}C$. Papain, pepsin, trypsin, and alcalase produced different degrees of hydrolysis (DH), 10.66%, 12.42%, 10.83%, and 25.31%, respectively, at an incubation time of 120 min. The SDS-PAGE reveals that significant amounts of bovine serum albumin (BSA), ${\beta}$-lactoglobulin (${\beta}$-LG), and ${\alpha}$-lactalbumin (${\alpha}$-LA) survived papain digestion. In contrast, pepsin completely removed BSA but not ${\beta}$-LG present in heated colostral whey. Alcalase completely eliminated BSA, ${\beta}$-LG, and ${\alpha}$-LA. This differential hydrolysis was confirmed by reversed-phase HPLC analysis. Using ion-exchange chromatography, fraction-1 (F-1) was obtained from alcalase hydrolysate at a NaCl gradient concentration of 0.25 M. Reversed-phase HPLC chromatograms of alcalase F-1 showed numerous small peaks, which probably indicate that a variety of new peptides were produced. Iron content of alcalase F-1 was 28.94 ppm, which was the highest among all enzyme fractions, whereas iron content of colostral whey was 36.56 ppm. Main amino acids contained in alcalase F-1 were Thr (15.45%), Glu (14.12%), and Ser (10.39%). Therefore, alcalase can be used to generate good iron-binding peptides in heated colostral whey, and the resulting iron-binding peptides could be suitable as a value-added food ingredient for food supplements.

• Reproductive and Developmental Biology
• /
• 제33권4호
• /
• pp.189-194
• /
• 2009

The objective of this study was to determine effects of different culture media. Preantral follicles were mechanically extracted from bovine ovaries and cultured for 16 days in tissue culture medium (TCM)-199, DMEM or alpha-minimal essential medium ($\alpha$-MEM) + 10% FBS + 0.1 mg/ml sodium pyruvate + 100 mIU/ml FSH. The collected primary follicles from ovary were higher than the primary and secondary follicles. The survival rates of the follicles in TCM-199 were significantly higher (p<0.05) than those in DMEM and $\alpha$-MEM. The diameter of the follicles progressively increased during 12 days of culture. The maximum size ($139.1{\pm}5.4\;{\mu}m$) reached on Day 12 of the in vitro culture and decreased on Day 16. These results suggest that in a culture of bovine preantral follicles, TCM-199 is an optimal medium and a longer-term culture of preantral follicles (>12 days) may be needed to form antra.