• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.853-865
• /
• 2012

This study has analyzed body size of adult women between 20~59 years old in 2010 conducted by Size Korea and the study method is as follow. (1) Distribution ratio of bust circumference per age and distribution ratio of differences of bust drops were analyzed. (2) Analysis of one-way design of experiment was carried out for 20 items of body sizes according to differences of bust drops with regard to age groups of 20 and 40 years old in consideration of tourists who are unspecified target and for the whole ages groups. (3) Comparison analysis of 20 items of body sizes per bust circumference and according to level of differences of bust drops was carried out and (4) t-test of the two groups based on the standard of 12.5 cm of the differences of bust drops was conducted and was analyzed. Tthe differences of bust drops below 10 cm were reduced according to ages. 12.5 cm was the most in the group of ages of 20s and under 7.5 cm was reduced as ages were higher. Body items according to the differences of bust drops per ages had meaningful differences between groups except (acromion height-axilla height), height and shoulder length for the group of ages of 20s and in the whole ages groups, there was meaningful difference between groups in all items except height and shoulder length. Comparisons according to the differences of bust drops per section of 5 cm of bust circumference showed meaningful differences between groups in general in items of BMI, bust point-bust point, neck circumference, bust circumference, underbust circumference, neck point to bust point and weight. As the result of comparing the two groups of the differences of bust drops based on the standard of 12.5 cm, all had meaningful differences except stature and shoulder length.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1262-1272
• /
• 2009

The study is classifies the figures of obese women aged 20-50 with an over 25 BMI from the data of the fifth Size Korea in 2005. As the result of conducting the factor analysis for segmenting the shape, Factor 1, Factor 2, Factor 3, and Factor 4 are respectively derived as the factor on a volume, the factor on the size of the vertical direction, the factor on the shoulder region, and the factor on the body length balance. As the result of conducting the cluster analysis using 4 factors (scores extracted from the analysis of factor analysis) the body type of obese women was classified into four types. The name of shape was specified by combining 'P' (an abbreviation of petite) that indicated the height (smaller than 155cm) among the height names of KS standard, 'R' (abbreviation of regular) that indicated the height (155cm-165cm) and the body characteristics. Type 1 had the longest length, and normal circumference, thickness, and width but with the developed shoulder. Type 1 was classified as a robust, 'Plus-RH'. Type 2 had the middle height, the shortest length of the upper part, a relatively-long length of the lower part of body. Type 2 shows the characteristics of a small body that was classified as 'Plus-PI'. The most obese body was Type 3 that had the normal length and shoulder size but showed the longest length of the upper part of the body; it was classified as 'Plus-PO'. Type 4 as the small shape had a potbelly and showed the characteristics of the shortest body classified as 'Plus-Pb'.

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.74-87
• /
• 2017

The aim of this study was to analyze the features of bodice patterns modeled using a dress form that represents Korean female fashion models' body features. A controlled experiment was carried out using an existing dress form that has been frequently used in South Korea. The purpose of the study was to suggest notable findings derived from understanding the development of bodice patterns for Korean female fashion models. The comparison of features of bodice patterns from the developed and existing dress forms was carried out with consideration of the upper body features of the developed dress form, such as body angles and body cross-sectional shapes. The following results were derived from the investigations. (1) The angles of the upper and lower breast cups of the developed dress form differed to those of the existing dress form, showing a 5.0cm smaller front shoulder dart and a 3.5 larger ㎝ ㎝ front waist dart within the bodice patterns. (2) The body angle features of the developed dress form included a straighter neck and shoulder blade and more concave center back than the existing dress form, with a 2.0 reduced back neck height and a 4.8 larger back waist dart for ㎝ ㎝ the bodice back panel. The more realistic body angles of the developed dress form anticipate the improvement of garment pattern-making. (3) The altered shoulder angles resulted in an increased size of the back shoulder dart and a decreased size of the front shoulder height within the bodice patterns. (4) The increased rate of curvature of cross-sectional shapes on the bust and waist circumferences of the developed dress form resulted in an increase in the sizes of the front and back waist darts.

• Fashion & Textile Research Journal
• /
• v.16 no.4
• /
• pp.635-644
• /
• 2014

This study provides basic reference data for brassiere wearing conditions, design preferences of new silver women (50s-60s) and development of brassiere products. We compiled and compared 163 pieces of brassiere (considering of 105 domestic general brassieres and 58 foreign silver brassieres) analyzed using SPSS Statistics 21 program. A survey was then conducted on the actual wearing, purchasing conditions, design preferences for 176 females (50s-60s). The result of this study are as follows: First, comparing actual product conditions (domestic general products and foreign silver products), the ratio of full cup in cup height, V-shape type in neckline shape, long type in front-end length, wide type in wing width, U-shape type in shoulder strap form, wide type in shoulder strap width, no-wire brassieres in breast wire type, all-in-one type in shoulder strap separation, back type in closure type appeared higher than other types of brassiere in domestic general product. Second, a study also showed that 60s women's wearing time is lower than 50s women's; however, 60s women expressed a higher figure and preference for the purchasing ratio in the department store, full cup in cup height, short type in length of brassieres, wide type in wing width, U-shape in shoulder strap form, small type in shoulder strap width, back type in closure type and no-wire brassieres than those in their 50s. It was found they prefer fabric with a high natural content, nude tone color without decoration & pattern and camisole brassieres.

• Archives of Plastic Surgery
• /
• v.48 no.6
• /
• pp.583-589
• /
• 2021

Background In prosthesis-based breast reconstruction patients, the drain tends to be kept in place longer than in patients who undergo only mastectomy. Postoperative arm exercise also increases the drainage volume. However, to preserve shoulder function, early exercise is recommended. In this study, we investigated the effect of early exercise on the total drainage volume and drain duration in these patients. Methods We designed a prospective randomized trial involving 56 patients who underwent immediate breast reconstruction following mastectomy using tissue expanders. In each group, the patients were randomized either to perform early arm exercises using specific shoulder movement guidelines 2 days after surgery or to restrict arm movement above the shoulder height until drain removal. The drain duration and the total amount of drainage were the primary endpoints. Results There were no significant differences in age, height, weight, body mass index, or mastectomy specimen weight between the two groups. The total amount of drainage was 1,497 mL in the early exercise group and 1,336 mL in the exercise restriction group. The duration until complete removal of the drains was 19.71 days in the early exercise group and 17.11 days in the exercise restriction group. Conclusions Exercise restriction after breast reconstruction did not lead to a significant difference in the drainage volume or the average time until drain removal. Thus, early exercise is recommended for improved shoulder mobility postoperatively. More long-term studies are needed to determine the effect of early exercise on shoulder mobility in prosthesis-based breast reconstruction patients.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.237-248
• /
• 1988

To access the appropriate height of sleeve cap which is required for the basic sleeve pattern according to arm movements, plaster gypsum experiment was performed. Arm movements were 5types ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical directions in the front. The appropriateness of the pattern was analyzed by measuring clothing pressure. The results obtained were as follows: 1. Increasing the movement angle, sleeve width increased but height of sleeve cap and armhole girth decreased. 2. Increasing the movement angle, the acromion moved to the front part of bodice. 3. On the basis of the result of the height of sleeve cap, the $\frac{AH}{4} +2.5cm$ sleeve basic 4 pattern is suitable for the direction $M_1(0^{\circ}),\;M_2(45^{\circ})$, and the $\frac{AH}{5}$sleeve basic pattern is suitable for the direction $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$. 4. As the movement angle and height of sleevecap increased, the part which receive high pressure increased and the difference between the hightest and the lowest clothing pressure increased. 5. By the variation of movement angle and height of sleevecap, clothing pressure of upperarm was affected more than that of shoulder blade. 6. The clothing pressure of upperarm and shoulder blades were more affected by the height of sleeve cap than the ease of breast area. 7. Considering the clothing pressure of various arm movement, the most appropriate height of sleeve cap for $M_1(0^{\circ}),\;M_2(45^{\circ})$ positions was to use the $\frac{AH}{4}$+2.5cm, and for $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$, was $\frac{AH}{5}$.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.311-318
• /
• 2010

This study examined the double piked dismount among the landing techniques of parallel bars based on three-dimensional motion analysis. Four male national gymnasts were the subjects. This study was performed to provide quantitative data highlighting players strengths and weaknesses to enable more stable landing technique. The variables analyzed were the position and velocity of center of gravity(CG) and angles of shoulder joints, hip joints, and trunk. The results are as follows: S1 secured the height of flight with fast vertical rise. After the easy spin in the air, he conducted a stable landing maintaining a proper hip joints angle. S2, S3, and S4, however, began the backward somersault already before leaving the bars, so they moved backward greatly making it more difficult to achieve a higher flight path. As a result, they couldn't control the velocity of their backward movement at landing. For a stable landing, they have to maintain the negative shoulder angle when rising, minimize both antero-posterioror side-to-side movements by doing a strong tap using hip joints, to secure the height of flight before the somersault. Results also show that at the descent, they should conduct rapid spinning by increasing their shoulder and hip joints to the maximum while controlling their velocity.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.17-24
• /
• 2006

In this paper, we propose a stress analysis on foot by lifting task attitudes. Maximum force and peak pressure were measured on 8 body regions by Pedar system in order to analysis the stress which is affected by task style and angle on foot when Manual Materials Handling task. As for the peak pressure of the whole foot as to the task height during the lifting task, the height from Knuckle to Shoulder was the least in the peak pressure. Also, as for the maximum force and the peak pressure of the whole foot as to the task angle during the lifting task, it could be seen that the more an angle increases, the stress influencing on a foot jumps. As for the maximum force and the peak pressure by foot region as to the task height in case of the lifting task, the height from Knuckle to Shoulder is indicated the smallest value in the maximum force and the peak pressure, thus there is necessary to attain the work design that considered this. Also, as for the maximum force by foot region as to the task angle in case of the lifting task, 0° tasking is indicated to be least, thus there is necessity to be attained the tasking design in a bid to prevent the existence of an angle. The results of this paper are thought to be helpful to the suitable work design, to the prevention of musculoskeletal disorders related to the lower limbs, and to the design of ergonomic safety shoes.

• Clinics in Shoulder and Elbow
• /
• v.22 no.4
• /
• pp.216-219
• /
• 2019

Background: Progression of the tear size and erosion of the greater tuberosity (femoralization) in the supraspinatus tear makes it difficult to repair or increases the risk of a re-tear. This study examined the proximal articular surface and greater tuberosity of the humeral head in plain radiography. Methods: Two-hundred forty-seven cases, whose anteroposterior (AP) radiographs were taken correctly, were included from 288 cases, in whom the status of the supraspinatus had been confirmed by surgery. After downloading the plain AP radiograph as DICOM, the radius of the circle apposed at the superior half of the articular surface of the head, and the distance between the circle and the farthest point of the greater tuberosity ('height' of the greater tuberosity) were calculated using the software (TechHime, Korea). MRI checked the number of torn tendons and degree of muscular atrophy. Results: The following were encountered: 93 intact supraspinatus, 50 partial-thickness tears, and 104 full-thickness tears. In the analysis using the 93 intact cases, the average radius of the rotation center was 25.3 mm in male and 22.3 mm in female. The average height of the greater tuberosity from the circle with the same rotation center was 4.3 mm in male and 4.2 mm in female with no statistical significance. The correlation between the reparability of supraspinatus and height of the greater tuberosity, fatty infiltration, and muscular atrophy was confirmed. Conclusions: The height of the greater tuberosity from the circle with the same rotation center was 4.3 mm in male and 4.2 mm in female. This height was strongly correlated with muscular atrophy and fatty infiltration of the supraspinatus tendon.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.15-26
• /
• 2002

The purpose of this study was to classier the somatotype of late middle-aged women and to analyze the characteristics of each somatotype. The subjects were 337 late middle-aged women and their age range os from 45 to 59 fears old. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis and discriminant analysis. The results were as follows; 1. The result of factor analysis indicated that 9 factors were extracted through factor analysis and those factors comprised 83.56 percent of total valiance. 2. Using factor scores, cluster analysis was carried out and the subject were classified into 4 cluster. Each cluster was classified as their body front and side view contour. Type 1 is tall, slim, and lower balk is flat on the side. Type 2 is standard and lean-back type on the side. Type 3 is standard height and weight, H type in front, and belly-protruded on the side. Type 4 is short, fat, and the side is hip-protruded. 3. According to the stepwise discriminant analysis, the 9 important items in classifying the somatotype of the late middle-aged women are as follows ; lower back tilt angle, hip depth(back) -back waist depth(back), bust depth(fore) - anterior waist depth(fore), jugular fossa point(fore), upper back tilt angle, burst breadth -waist breadth, right shoulder tilt, height of shoulder - height of anterior waist, abdomen breath. The correct classification rate for these items is as exact as 84.62%.