• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.619-625
• /
• 2001

An axial-flow-induced vibration model was proposed for a rod supported by two translational springs at both ends. For developing the model, a one-mode approximation was made based on the assumption that the first mode was dominant in vibration behavior of the single span rod. The first natural frequency and mode shape functions for the flow-induced vibration, called the FIV model were derived by using Lagrange＇s method. The vibration displacements at reactor conditions were calculated by the proposed model for the spring-supported rod and by the previous model for the simple-supported(55) rod. As a result, the vibration displacement for the spring-supported rod was larger than that of the 55 rod, and the discrepancy between both displacements became much larger as flow velocity increased. The vibration displacement for the spring-supported rod appeared to decrease with the increase of the spring constant. AS flow velocity increased, the increase rate of vibration displacement was calculated to go linearly up, and that of the rod having the short span length was larger than that of the rod having the long span length although the displacement value itself of the long span rod was larger than that of the short one.

• Steel and Composite Structures
• /
• 제48권3호
• /
• pp.321-333
• /
• 2023

This paper proposes a comprehensive investigation on lateral stiffness of corner-supported steel modular frame using splice connection. A full-scale modular frame with two stacked steel modules under lateral load is tested. Ductile pattern in the transfer of lateral load is found in the final failure mode. Two types of lateral stiffness, including tangent stiffness and secant stiffness, are defined from the load-displacement due to the observed nonlinearity. The difference between these two types of stiffness is found around 20%. The comparisons between the experimental lateral stiffness and the predictions of classical methods are also conducted. The D-value method using hypothesis of independent case is a conservative option for predicting lateral stiffness, which is more recommended than method of contraflexural bending moment. Analyses on two classical short-rod models, including fix-rod model and pin-rod model, are further conducted. Results indicate that fix-rod model is more recommended than pin-rod model to simplify splice connection for simulation on lateral stiffness of modular frame in elastic design stage.

• 대한전자공학회논문지SP
• /
• 제47권1호
• /
• pp.91-96
• /
• 2010

본 논문에서는 핵연료봉의 변형에 대한 고정도 검사방법을 제안한다. 핵 연료봉과 이를 관측하는 영상 센서의 광축을 수직으로 구성한다. 영상 센서의 광축을 기준으로 45도 또는 그보다 높은 각도로 레이저 라인빔을 연료봉 표면에 조사하면 연료봉의 수평 방향 변위가 영상 센서에서는 수직 방향 변위로 관측된다. 핵 연료봉 표면에 일정 각도로 입사된 레이저 라인빔이 영상 센서면에서는 일정 두께를 갖는 포물선 형태로 관측되게 된다. 센서 화면에 나타나는 일정 두께의 포물선을 영상처리하여 타원으로 모델링하고 타원의 장축과 단축의 기울기를 구한다. 포물선의 변곡점과 모델링한 타원의 장축과 단축이 교차하는 지점을 특징점으로 추출한다. 이와 같은 영상처리 알고리즘을 이용하여 핵 연료봉의 수평방향 변위에 따른 특징점 좌표의 수직방향 편차를 계산한다. 크러드가 형성된 핵연료봉 시편에 대해 고해상도 영상센서를 사용하여 실험한 결과 중성자 조사후 핵연료봉의 변형 검사기준인 $150{\mu}m$ 보다 3배 이상 개선된 $50{\mu}m$ 이하의 검사 정밀도를 달성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.21-23
• /
• 2005

NARX(Nonlinear AutoRegressive with eXogenous input) neural network was used for prediction of nuclear reactor behavior which was influenced by control rods in short-term period and also by xenon and boron in long-term period in load following operations. The developed model was designed to predict reactor power, xenon worth and axial offset with different burnup rates when control rod and boron were adjusted in load following operations. Data of UCN 3 were collected by ONED94 code. The test results presented exhibit the capability of the NARX neural network model to capture the long term and short term dynamics of the reactor core and seems to be utilized as a handy tool for the use of a plant simulation.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.130-136
• /
• 1998

In the PANBOX 2 system an excore detector module simulating the excore signal responses during a short term transient is implemented in order to simulate the reaction of the flux detector and control system upon rapid power changes as it occurs e. g, in rod drop events. This module has been verified in the past by comparison calculations with the PANBOX 1 system. This report describes additional PANBOX 2 validation calculations which have bee compared with experiment data measured at german plant KKG, cycle 1, for a rod drop event. In general, the PANBOX 2 results are in very good agreement with the KKG experiments. Therefore it is concluded that the excore detector model of PANBOX 2 is successfully validated.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2771-2782
• /
• 2022

When assessing the radiological consequences of postulated accident scenarios, it is of primary interest to determine the amount of radioactive fission gas accumulated in the fuel rod free volume. The state-of-the-art semi-empirical approach (ANS 5.4-2010) is reviewed and compared with a mechanistic approach to evaluate the release of radioactive fission gases. At the intra-granular level, the diffusion-decay equation is handled by a spectral diffusion algorithm. At the inter-granular level, a mechanistic description of the grain boundary is considered: bubble growth and coalescence are treated as interrelated phenomena, resulting in the grain-boundary venting as the onset for the release from the fuel pellets. The outcome is a kinetic description of the release of radioactive fission gases, of interest when assessing normal and off-normal conditions. We implement the model in SCIANTIX and reproduce the release of short-lived fission gases, during the CONTACT 1 experiments. The results show a satisfactory agreement with the measurement and with the state-of-the-art methodology, demonstrating the model soundness. A second work will follow, providing integral fuel rod analysis by coupling the code SCIANTIX with the thermo-mechanical code TRANSURANUS.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.158-161
• /
• 2003

Extrusion of forward-gear and backward-rod by combined extrusion with controlling the extrusion velocity using a counter tool is studied. In the combined forward-backward extrusion with controlling extrusion velocity, only parts with short gear can be formed. To obtain longer gear parts, extrusion with reverse ram motion is carried out after the combined forward-backward extrusion process. In this method, combined forward-backward extrusion is carried out until excessive extrusion length is attained and then, the motion of the punch is stopped and the counter tool is moved in the inverse direction and returned to the position for obtaining the desired extrusion length. The experiment is carried out by using lead for billets as a model material. With reverse ram motion, longer gear teeth without under-filling defect can be formed than that by only combined extrusion with controlling extrusion velocity.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.511-520
• /
• 2010

In general, spot welding is used at no welding rod or flux for the process, low welding point temperature compared to arc welding, short heating time, less damage to the parent material, and low deformation and residual stress, relatively. Also, because of the pressurization effect, better mechanical qualities of the welding parts are obtained. Therefore, in various fields of industry its rapid operation speed can make mass production possible such as motor industry. In FEM analysis for the spot welding process, it is effective to use simple modeling rather than complicated one because of its numerous number of spots and reduction of analysis time. Therefore, this study provides with not only simplification of modeling analysis by using beam component composition of structure without re-compositing the spot welding point mesh but also modeling analysis of which property of fracture strength is reflected. In addition complete spot welding model is examined at rectangular post shape (hat shape) by impact test, compared the results, and verified its validity. As a result, it is possible to optimize the welding position and to recognize the strength of structure and the proposed equal distance model shows the effect of welding point reduction and improvement of stiffness.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.149-156
• /
• 2016

저장조에 위치한 사용후핵연료는 가혹한 원자로 조건에 의해 구조적 건전성이 와해되므로 외력에 취약하다. 따라서 운반 및 취급 중 사고 상황이 고려되어야 한다. 극단적인 경우, 핵연료 취급 중 사고로 인해 핵연료 저장조에서 핵연료집합체 낙하가 발생할 수 있다. 이러한 사고 상황 하에서 연료봉 파손 등을 평가하기 위해서 수조에 충돌할 때 발생하는 충돌력을 분석할 필요가 있다. 이는 핵연료가 수조 바닥에 충돌할 때의 속도를 입력으로 하여 평가될 수 있다. 연료봉이 핵연료 중량 및 부피의 대부분을 차지하고 있으므로, 연료봉 다발은 수중 항력을 예측하는데 중요한 역할을 한다고 볼 수 있다. 본 연구에서는 $3{\times}3$ 의 짧은 연료봉 다발을 모델로 사용하여 수중에서 낙하할 때 받는 수력을 계산하였고, 이를 전산모사와의 비교를 통하여 검증하였다. 본 방법론을 사용후핵연료 건전성 평가에 적용할 수 있을 것으로 기대된다.

• 한국어류학회지
• /
• 제27권4호
• /
• pp.257-262
• /
• 2015

한국고유종인 왕종개의 안구를 관찰하고 망막에 존재하는 시각세포의 구조를 광학현미경과 주사전자현미경을 이용하여 조사하였다. 왕종개의 안구는 $3.53{\pm}0.2mm$의 크기였으며 두장대 안경비율은 $14.08{\pm}0.7$이였다. 시각세포의 수직단면을 확인한 결과 망막은 여러 층으로 구성되어 있었으며 전체 망막의 두께는 $216.42({\pm}13.36){\mu}m$였으며, 시각세포의 핵이 존재하는 바깥핵층의 두께는 13.42 $({\pm}2.16){\mu}m$였다. 이형 이중 원추세포 중 긴 원추세포는 $26.42{\pm}1.7{\mu}m$의 길이였으며 직경은 $5.12{\pm}0.6{\mu}m$로 확인되었다. 짧은 원추세포는 $16.82{\pm}1.1{\mu}m$의 길이였으며 직경은 긴 원추세포와 유사한 $5.10{\pm}0.31{\mu}m$로 확인되었다. 간상세포는 길이 $40.13{\pm}2.4{\mu}m$였으며 직경 $3.95{\pm}0.4{\mu}m$로 확인되었다. 시각세포의 수평단면을 확인한 결과 이형 이중 원추세포가 규칙적인 배열로 인해 열 배열(row-type)의 모자이크 패턴으로 나타났다. 긴 원추세포와 짧은 원추세포가 하나의 쌍을 이루었으며 긴 원추세포는 내절이 절단되어 eosin에 염색되었으며 짧은 원추세포는 외절이 절단되어 hematoxylin에 염색되었다. 전자현미경을 통해 미세구조를 확인한 결과 내절과 외절로 구분되고 내절은 장타원형으로 확인되었다. 외절에는 디스크구조의 판상을 확인할 수 있었으며 내절과 외절을 연결해주는 배상극 (calyceal processes)들이 가장자리에 분포하고 있었다.