• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.11-16
• /
• 2016

The conduction behavior and electron concentration change in a-IGZO thin-films according to the RTA (rapid thermal annealing) were studied. The electrical characteristics of TFTs (thin-film-transistors) annealed by different temperatures were measured. The sheet resistance, electron concentration, and oxygen vacancy of a-IGZO film were measured by the four-point-probe-measurement, hall-effect-measurement, and XPS analysis. The RTA process increased the driving current of IGZO TFTs but the VTH shifted to the negative direction at the same time. When the RTA temperature is higher than $250^{\circ}C$, the leakage current at off-state increased significantly. This is attributed to the increase of oxygen vacancy resulting in the increase of electron concentration. We demonstrate that the RTA is a promising process to adjust the VTH of TFT because the RTA process can easily modify the electron concentration and control the conductivity of IGZO film with short process time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.521-524
• /
• 2010

Low loss perovskite niobates and tantalates have been placed on a short list of functional materials for future technologies. In this study, we fabricated Ag(Ta,Nb)$O_3$ thick films on the $Al_2O_3$ substrates by the screen printing method. The Ag(Ta,Nb)$O_3$ powders were fabricated by the mixed oxide method. The sintering temperature and time were $1150^{\circ}C$ and 2 hrs, respectively. The results of XRD analysis showed that the specimens employed in this study had the pesudo cubic structure. The dielectric permittivity and loss tangent of the films have been characterized from 1 kHz to 1 MHz. Also the dielectric permittivity and loss tangent were measured from 303 K to 393 K. The electrical properties of the film are also discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.158-161
• /
• 2006

Superstrate pin amorphous silicon thin-film (a-Si:H) solar cells are prepared on $SnO_2:F$ and ZnO:Al transparent conducting oxides (TCO) In order to see the effect of TCO/P-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage $V_{oc}$ than cells prepared on $SnO_2:F$. Presence of thin microcrystalline p-type silicon layer $({\mu}c-Si:H)$ between ZnO:Al and p a-SiC:H plays a major role by causing improvement in fill factor as well as $V_{oc}$, of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of pi interface, we could obtain high $V_{oc}$, of 994mv while keeping fill factor (72.7%) and short circuit current density $J_{sc}$ at the same level as for the cells on $SnO_2:F$ TCO. This high $V_{oc}$ value can be attributed to modification in the current transport in this region due to creation of a potential barrier.

• Cross-Cultural Studies
• /
• v.29
• /
• pp.7-24
• /
• 2012

"Duck Hunting" is the most psychological play with unique structure written by Aleksandr Vampilov. The play describes protagonist hero's furious behavior with psychological instability, therefore, this play tends to be recognized as serious and complicated one. After the death of Vampilov, "Duck Hunting" was reproduced as a film, titled as "Vacation in September." This study is designed to shed light on the play's psychological-dramatic factors by focusing on the structure of narrative and spatial-temporal objet. Also, this study compared the screenshots of the play with their textual meanings, then concentrated on main character's psychological features. By focusing on protagonist hero's mind, this study tries to look into the features of the play and its meanings for modern period. The film's plot is a kind of story telling structure based on main character's memory. The short stories of main character represents that Jilov(main character's name)'s losing his own life. The audience can acknowledge that Jilov's life as a duck hunter who is cynical, ideological, lazy, and self-interest oriented person. This play provokes the audience to compare their life to Jilov's one because such comparison helps the audience recognize their lives as surplus style of life with nihilism. Jilov as a character represents one of Soviet's generation with the feeling of great loss in 1960s.

• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.271-274
• /
• 2016

The reliability and reproducibility of gas sensors are very important for real applications. The influence of nanofiber length and sensing film thickness on the reliability and response of gas sensing characteristics was investigated. For this, the length of $SnO_2$ nanofibers was controlled by tuning ultrasonic treatment and the different thicknesses of sensing films were prepared by manipulating the amount of slurry deposition. The sensor prepared from long nanofibers (length: ${\sim}3.6{\mu}m$) showed the significant fluctuation of gas sensing characteristics when the film becomes thinner than $18{\mu}m$, while that prepared from short nanofibers (length: ${\sim}0.9{\mu}m$) showed reproducible sensor response and resistance regardless of film thickness. Moreover, the shortening of nanofibers enhanced the gas response ~2 times, which can be explained by the increase of chemiresistive fiber-to-fiber contacts. The reproducibility, gas response, and selectivity of $SnO_2$ nanofiber gas sensor could be controlled by tuning nanofiber length, film thickness, and catalyst loading.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.27-30
• /
• 2001

Electromigration Phenomena in Al-1%Si thin film interconnections under DC and PDC conditions were investigated. Thin film interconnections with $SiO_2$ and PSG/$SiO_2$ dielectric passivation layer were formed by a standard photolithography process method and test line lengths were 100, 400, 800, 1200, and 1600 $\mu\textrm{m}$. The current density of $1.19\times10^7\textrm{A/cm}^2$ was stressed in Al-1%Si thin film interconnections under DC condition. The current density of $1.19\times10^7\textrm{A/cm}^2$ was also applied under PDC condition at the frequency of 1 Hz with the duty factor of 0.5. The electromigration resistance of PSG/SiO2 dielectric passivation test line was stronger than $SiO_2$ dielectric passivation test line. The lifetime under PDC was 2-4 times longer than DC condition. As the thin film interconnection line increased, the lifetime decreased and saturated over the critical length. Failure patterns by an electromigration were dominated by void-induced electrical open and hillock-induced electrical short.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.150-161
• /
• 2017

The short animation directed by Sang-Ho Yeon has led the sympathy and reflection of audiences through reveling the violence of the military in the form of the social criticism film. The explores the social value of animation by the content of social criticism, not for entertainment uses but for public interest. This research addresses how the function of social criticism implements in animation film, especially, its narratives and direction. In the light of this, firstly, literature will review the general characteristics of social criticism films, Secondly, based on literature reviews, analysis tools will be drew, thirdly, the case study regarding will be processed by focusing on The function of social criticism, the technique of direction and expression of animation. As a result of this research, shows unique traits because of the hierarchical and exclusive characteristics of military culture, which differs from general characteristics of social criticism films dealing with historic and social issues. In addition to this, the function of social criticism is effectively implemented in animation film, by the creative narratives and technique of direction by a director, Sang-Ho Yeon.

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2012

We fabricated a-Si:H thin-film solar cell using the two-dimensional (2D) periodic patterned glass substrate. The use of a 3D periodic texture rather than a randomly texture at surface of TCO can result in higher short circuit current densities ($J_{sc}$). In order to analyze the optical effect of patterning glasses, ray-tracing simulations were performed. Also, p-i-n cells were deposited on patterned glasses as substrate by PECVD. UV-Vis spectroscopy, light I-V measurement were carried out for the optoelectronic characterization. The anti-reflective and light-trapping performance of patterning glass substrate was investigated by a comparison of experimental results with numerical simulations.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.7
• /
• pp.263-270
• /
• 2014

This paper suggests a method for predicting a box-office success of the film. Lately, as the growth of the film industry, a variety of studies for the prediction of market demand is being performed. The product life cycle of film is relatively short cultural goods. Therefore, in order to produce stable profits, marketing costs before opening as well as the number of screen after opening need a plan. To fulfill this plan, the demand for the product and the calculation of economic profit scale should be preceded. The cases of existing researches, as a variable for predicting, primarily use the factors of competition of the market or the properties of the film. However, the proportion of the potential audiences who purchase the goods is relatively insufficient. Therefore, in this paper, in order to consider people's perception of a movie, Twitter was utilized as one of the survey samples. The existing variables and the information extracted from Twitter are defined as off-line and on-line element, and applied those two elements in machine learning by combining. Through the experiment, the proposed predictive techniques are validated, and the results of the experiment predicted the chance of successful film with about 95% of accuracy.

• Composites Research
• /
• v.25 no.4
• /
• pp.117-125
• /
• 2012

Warpage of the film insert molded (FIM) part is caused by an asymmetric residual stress distribution. Asymmetric residual stress and temperature distribution is generated by the retarded heat transfer in the perpendicular direction to the attached film surface. Since warpage was not prevented by controlling injection molding conditions, glass fiber (GF) filled composites were employed as substrates for film insert molding to minimize the warpage. Distribution of short GFs was evaluated by using micro-CT equipment. Proper models for micro mechanics, anisotropic thermal expansion coefficients, and closure approximation should be selected in order to calculate fiber orientation tensor and warpage of the FIM part with the composite substrate. After six kinds of micro mechanics models, three models of the thermal expansion coefficient and five models of the closure approximation had been considered, the Mori-Tanaka model, the Rosen and Hashin model, and the third orthotropic closure approximation were selected in this study. The numerically predicted results on fiber orientation tensor and warpage were in good agreement with experimental results and effects of GF reinforcement on warpage of the FIM composite specimen were identified by the numerical results.