• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.245-252
• /
• 2020

The purpose of this study was intended to recognize the importance of quality control (QC) in order to reduce exposure and improve image quality by comparing the center-point (CP) of according to hospital grade and the difference between X-ray field (XF) and light field (LF) in diagnostic digital X-ray devices. XF and LF size, CP were measured in 12 digital X-ray devices at 10 hospitals located in 00 metropolitan cities. Phantom was made in different width respectively, using 0.8 mm wire after attaching to the standardized graph paper on transparent plastic plate and marked as cross wire in the center of the phantom. After placing the phantom on the table of the digital X-ray device, the images were obtained by shooting it vertically each field of survey. All images were acquired under the same conditions of exposure at distance of 100cm between the focus-detector. XF and LF size, CP error were measured using the picture archiving communication system. data were expressed as mean with standard error and then analyzed using SPSS ver. 22.0. The difference in field between the XF and LF size was the smallest in clinic, followed by university hospitals, hospitals and general hospitals. Based on the university hospitals with the least CP error, there was a statistically significant difference in CP error between university hospitals and clinics (p=0.024). Group less than 36-month after QC had fewer statistical errors than 36-month group (0.26 vs. 0.88, p=0.036). The difference between the XF and LF size was the lowest in clinic and CP error was the lowest in university hospital. Moreover, hospitals with short period of time after QC have fewer CP error and it means that introduction of timely QC according to the QC items is essential.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.619-626
• /
• 2020

This study aimed to identify the error rates in Catheter Calibration Mode, Auto Calibration Mode, and Segment Calibration Mode among many calibration modes as a quantitative evaluation tool used for predicting the diameter and length of balloon or stent in percutaneous intravascular balloon dilatation or stent insertion. Our experiment was conducted with Copper Wire of 2 mm × 80 mm (diameter × length) manufactured elaborately for quantitative evaluation in calibration and Metal Ball of 5, 10, 15, 30, and 40 mm and Acryl Phantom of 25 mm, 50 mm, 75mm, 100 mm, 125 mm, 150mm, 175 mm, and 200 mm. At each height, subtraction images were acquired with a cineangiograph and Stenosis Analysis Tool as a software provided by the equipment company was used for measurement. To evaluate the error rates in Catheter Calibration Mode, Copper Wire was put on each acryl phantom before shooting. Copper Wire of 2 mm in diameter was set as a diameter for catheter, and Copper Wire of 8 mm in length was measured with Multi-segments. As a result, the error rates appeared at 1.13 ~ 5.63%. To evaluate the error rates in Auto Calibration Mode, the height of acryl was entered at each height of acryl phantom and the length of 8 mm Copper Wire was measured with Multi-segments and as a result, the error rates appeared at 0 ~ 0.26%. To evaluate the error rates in Segment Calibration Mode, each metal ball on the floor of table was calibrated and the length of 8 mm Copper Wire on each acryl phantom was measured and the length of 8 mm Copper Wire depending on the changes of acryl phantom height was measured with Mutli-segments and as a result, the error rates appeared at 1.05 ~ 19.04%. And in the experiment on OID changes in Auto Calibration Mode, the height of acryl phantom was fixed at 100mm and OID only changed within the range of 450 mm ~ 600 mm and as a result, the error rates appeared at 0.13 ~ 0.38%. In conclusion, it was found that entering the height values in Auto Calibration Mode, among these Calibration Modes for evaluating quantitative vascular dimensions provided by the software was the calibration method with the least error rates and it is thus considered that for calibration using a metal ball or other objects, putting them in the same height as that of treatment sites before calibrating is the method that can reduce the error rates the most.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.513-524
• /
• 2005

This study was conducted to introduce recycling procedures of food waste(FW) as feed according to the dehydration, semi-dehydration fermentation and liquid fermentation methods through the on-site survey of companies related, to trace physico-chemical components and nutritional losses depending upon the processing stage for each method and finally to suggest more desirable methodology for the efficient utilization of FW as animal feed. For the dehydration method, dewatering of FW alone reduced(P<0.05) moisture(approximately 10%) and ether extract contents and increased(P<0.05) fiber contents. Dewatering and subsequent dehydration of FW decreased(P<0.05) contents of ether extract, limiting amino acids such as lysine, methionine and histidine, pepsin digestibility of protein by half, and NaCl content by 40%, increased(P<0.05) contents of fiber, crude ash, Ca and P, and did not alter(P>0.05) pH. The semi-dehydration fermentation method of FW did not affect(P>0.05) the chemical components, pepsin digestibility of protein, pH and NaCl content. For the liquid fermentation method, pasteurization and fermentation of FW decreased(P<0.05) contents of dry matter, ether extract, crude fiber, lysine and NaCl; however, it did not affect(P>0.05) other chemical components, pepsin digestibility of protein and pH. Among the processing methods, nutrient losses were highest for the dehydration method(25% of metabolizable energy loss, 12% of organic matter loss) and little for the semi-dehydration and liquid fermentation methods. The on-site survey of companies related revealed that the existence of foreign materials in FW products were problematic for all the three companies surveyed, thus it was necessary to develop a more efficient screener. Before feeding FW-containing diets to pigs, high quality of protein and energy feedstuffs needed to be fortified for the dehydration method. For the semi-dehydration fermentation method, the scientific diet formulation technology was required at the initial mixing stage. For the liquid fermentation method, possibly most energetic and proteinaceous feeds needed to be supplemented for the normal animal growth.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.93-101
• /
• 1999

A simple experimental method was used in an attempt to realize the elevation of the fishing ability of purse seine in the sea area of Cheju Island, the changes of seine volume and tension in the purseline during pursing. Experiments carried out on the six types simplified reduced model seines which were made of knotless nettings. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two-ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cmfor seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. These model purse seines were made of the scale of 1/200 of its full scale, a 120 ton in the near sea of Cheju Island. Designing and testing for the model purse seines were based on the Tauti's law. Experiments were measured in the observation channel of a flume tank at the static conditions set up shooting and pursing equipments. Motion of purse seine during purse line was recorded by the two sets video camera for VTR which were placed in top and front of the model seine. The reading coordinate of seine volume carried out by the video digitization system, disk data for the purseline tension. An analysis were performed on the changes seine volume and tension in the purseline during pursing. The results obtained were as follows: 1. The seine volume during pursing was largest for Ⅵ seine with smallest d/l followed by V, IV, III, II and I seines, and tension in the purseline was small. 2. Seine volume during pursing can be expressed by the following equation; CVt=l-EXP[｛2.79 (d/l）＋0.35｝t-33.37 (d/l) ＋ 0.57] Where CVt is volume ratio, d is twine diameter, l is leg length and t is pursing time (sec). 3. Tension in the purse line during pursing can be expressed by the following equation; T= 1- EXP ｛0.57t ＋ 13.36 (d/l)+2.97｝ Where T is tension (kg) in the purseline during pursing.

• Journal of the Korean Society of School Health
• /
• v.10 no.2
• /
• pp.241-257
• /
• 1997

This study identifies a basic framework to analyze specific experiences of examinees so that which nurses are better able to understand reactions of examinees and, further, to provide better nursing treatments to them. This study follows Strauss & Corbin's analysis tool (1990). This basic framework identifies the specific mental reactions in a process away from the "being tightened" state. The main factors explaining this process include the 28 following variables : anxiety, being burdened, being suppressed, lack of agency, being suffocated, term pressure, expectation pressure, grade pressure, firmness, feebleness, helping others, being disturbed, watching others, off ficiousness, staightening on, depending on, getting along with, getting out of, shooting out, giving up, being alone, devoting, bracing up, being industrious, being harassed, being distressed, troubles, and quiting. Twelve variables are factored from the above factors which include pressure, being tighened, terms, expectations, grades, will, friends, family, open-minded confrontation, close-minded confrontation, pursuing, and wandering around. The Examinees' state of being tightened is first developed, watched by others, and finally resolved causing students either to pursue (positive reactions) or to wander around (negative reactions). Based on the theoretical framework, the following sixteen hypotheses are developed : 1. Students are less tightened in the first term. 2. Students are more tightened in the second term. 3. Students with higher grades feel less tightened. 4. Students with lower grades feel more tightened. 5. Students with higher expectations feel more tightened. 6. Students with lower expectations feel less tightened. 7. Students who are less tightened confront open-mindedly. 8. Students who are higher tightened confront close-mindedly. 9. Students with a strong will confront open-mindedly. 10. Students with a weak will confront close-mindedly. 11. Students who have more sincere friends confront open-mindedly. 12. Students who have less sincere frieds confront close-mindedly. 13. Students with family support confront open-mindedly. 14. Students with little family support confront close-mindedly. 15. Students confronting open-mindedly pursue. 16. Students confronting close-mindedly wander. We identify the following four relations from the data analysis : 1. Students with average grades in their first term are more tightened from high expectations and have a tendency to wander if they have less supporting families even if they also have a strong will and sincere friends. 2. Students with low grades in their second term are less tighened because of low expectations and have a tendency to wander if they have a weak will and few sincere friends even if they have strong family support. 3. Students with high grades in their second term are more tightened with high expectations and have a tendency to pursue confrontations open-mindedly if they have supporting families and a strong will even if they have few sincere friends. 4. Students with average grades in their first term are less tightened from fewer expectations and have a tendency to pursue confrontations open-mindedly when they have more supporting families and sincere friends even if they have a weak will. A Student's degree of being tightened are affected by grades, terms, and expectations. Being tightened is resolved positively or negatively based on will, friends, and family. We conclude that will, family support, and sincere friends cause students to confront "being tightened" open-mindedly. We also conclude that practical nursing for students who are tightened have to focus on creating environments in which students are able to confront open-mindedly.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.4
• /
• pp.654-686
• /
• 2007

To estimate and analyze an interested science and technology level in any case requires three basic informations: (1) relative positions of our technology level, (2) other relevant technology level of the world best country holding the state of the art technology, and (3) its theoretical or practical maximum level within a certain period of time. Further, additional information from analyzing its respective rate of technology changes is necessary. It seems that most previous empirical or case studies on technology level have not considered third and fourth informations seriously, and thus critically have missed important findings from a dynamic point of view on the matter. A dynamic approach considering types of development processes and paths as well as current position needs an application of a concept of technology development stages and respective growth curves. This paper proposes a new method of approach and application by implementing relatively simple types of the growth curve(S-curve) such as logistic and Comports curves and applying estimation results of these curves to ten core technologies of the growth engines for the next future generation in Korea. The study implies that Korean science and technology level in general clearly gets higher as it approaches to a recent time of period, but relative technology gap from the world best in terms of catching-up period does not get better or narrower in case of at least part of the concerned technologies such as bio new drugs and human organs, and intelligence robots. The possibility does exist that some of our concerned technologies shooting for the next future generation may not come to the world highest level in the near future. The purpose of this study is to propose possibilities of catching-up, if any, by estimating its relevant type of growth pattern by way of measuring and analyzing technology level and by analyzing the technology development process through a position analysis. At this stage this study tries to introduce a new theoretical approach of estimating technology level and its application to existing case study results(data) from Korea Institute of Science and Technology Planning and Evaluation(KISTEP) and Korea Institute of Industrial Technology Evaluation and Planing(ITEP), for years of 2004 and 2006 respectively. The study has some limitations in terms of accuracy of measuring(estimating) a relevant growth curve to a particular technology, feasibility of applying estimated results, accessing and analyzing panel experts opinions. Hence, it is recommended that further study would follow soon enough to verify practical applicability and possible expansion of the study results.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.102-107
• /
• 1997

This study was carried out to increase the rate of plant regeneration from embryogenic callus of A. keiskei on MS medium supplemented with ethylene inhibitors. When leaflet, petiolule, and petiole of A. keiskei were cultured on MS medium supplemented with 2, 4-D, callus was well induced from leaflet segments at 2.0 ppm 2, 4-D. Shoot elongation of plantlets and shooting from embryogenic callus of A. keiskei were best on 2, 4-D-free medium supplemented with 2 ppm $AgNO_3$ or 10 ppm $CoCl_2{\cdot}6H_2O$, but it was suppressed on the medium containing 1 ppm 2, 4-D with $AgNO_3$ or $CoCl_2{\cdot}6H_2O$. Root elongation of plantlets from embryogenic callus was best on 2, 4-D-free medium supplemented with 1 ppm $AgNO_3$ or 5 ppm $CoCl_2{\cdot}6H_2O$, but rooting from embryogenic callus was none on the medium containing 1 ppm 2, 4-D with $AgNO_3$ or $CoCl_2{\cdot}6H_2O$. Fresh weight of plantlets from embryogenic callus was heaviest on 2, 4-D-free medium supplemented with 2 ppm of $AgNO_3$ or $CoCl_2{\cdot}6H_2O$, while it was heaviest on the medium containing 1 ppm 2, 4-D with 1 ppm $AgNO_3$ or 2 ppm $CoCl_2{\cdot}6H_2O$.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.19-28
• /
• 2012

After the internet era, we are moving to the ubiquitous society. Nowadays the people are interested in the multimodal interaction technology, which enables audience to naturally interact with the computing environment at the exhibitions such as gallery, museum, and park. Also, there are other attempts to provide additional service based on the location information of the audience, or to improve and deploy interaction between subjects and audience by analyzing the using pattern of the people. In order to provide multimodal interaction service to the audience at the exhibition, it is important to distinguish the individuals and trace their location and route. For the location tracking on the outside, GPS is widely used nowadays. GPS is able to get the real time location of the subjects moving fast, so this is one of the important technologies in the field requiring location tracking service. However, as GPS uses the location tracking method using satellites, the service cannot be used on the inside, because it cannot catch the satellite signal. For this reason, the studies about inside location tracking are going on using very short range communication service such as ZigBee, UWB, RFID, as well as using mobile communication network and wireless lan service. However these technologies have shortcomings in that the audience needs to use additional sensor device and it becomes difficult and expensive as the density of the target area gets higher. In addition, the usual exhibition environment has many obstacles for the network, which makes the performance of the system to fall. Above all these things, the biggest problem is that the interaction method using the devices based on the old technologies cannot provide natural service to the users. Plus the system uses sensor recognition method, so multiple users should equip the devices. Therefore, there is the limitation in the number of the users that can use the system simultaneously. In order to make up for these shortcomings, in this study we suggest a technology that gets the exact location information of the users through the location mapping technology using Wi-Fi and 3d camera of the smartphones. We applied the signal amplitude of access point using wireless lan, to develop inside location tracking system with lower price. AP is cheaper than other devices used in other tracking techniques, and by installing the software to the user's mobile device it can be directly used as the tracking system device. We used the Microsoft Kinect sensor for the 3D Camera. Kinect is equippedwith the function discriminating the depth and human information inside the shooting area. Therefore it is appropriate to extract user's body, vector, and acceleration information with low price. We confirm the location of the audience using the cell ID obtained from the Wi-Fi signal. By using smartphones as the basic device for the location service, we solve the problems of additional tagging device and provide environment that multiple users can get the interaction service simultaneously. 3d cameras located at each cell areas get the exact location and status information of the users. The 3d cameras are connected to the Camera Client, calculate the mapping information aligned to each cells, get the exact information of the users, and get the status and pattern information of the audience. The location mapping technique of Camera Client decreases the error rate that occurs on the inside location service, increases accuracy of individual discrimination in the area through the individual discrimination based on body information, and establishes the foundation of the multimodal interaction technology at the exhibition. Calculated data and information enables the users to get the appropriate interaction service through the main server.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.125-154
• /
• 1972

The major purpose of this survey is to collect the related information on technical aspects for solving the problems which are facing producing farmers and regions, provide scientific facts to farmers related personals and institutions and aimed at contributing the development of sericultural sector in Korea. The results are as follows; (1) The area of mulberry field per a farmer which was selected as sample ranges from 3.0 to 370a with its average 45. 1a. And yet, the average of new cultivated areas is above than that of ordinary ones by 56.3 to 33.8a. The largest area is Honam hill area with 101. 1a and e smallest is Muzinzang with 20.8a. Shortly, a large number of farmer belongs to 11 to 50a with 66.5 per cent. (2) The ratio of clay and loam soils which are inadequte for growing of mulberry trees is 28.3 per cent and particulary high in new cultivated area with 36.2 per cent. And yet, base soil is occupied with 45 per cent of heavy clay and particularly even 54.2 per cent in new cultivated area. On the other hand, the number of areas which the contents of organic matters is relatively low, with 48.2 per cent is near the half, but the ratio of mulberry fields which seems to contain organic matters abundantly is only 7.2 per cent. (3) The varieties of mulberry trees are Ilgirae, Gaeryangseoban, Suwonsang No.4 and Nosang. The ,ratio of the varieties are 33.3%, 25.7%, 18.0% and 10.5%, respectively. Consequently the four varieties enumerated above occupies 93.5 per cent. (4) The mulberry fields are almost composed of exclusive mulberry fields and its ratio was 92.3 per cent. The number of planted trees per 10a arrange from 480 to 1,390 and its average is 846. But most of them nearly belong to 701 to 1,000 with 91.3per cent. (5) The second year's autumn after planting is generally adopted as the first harvesting season, and its ratio is 73.0 per cent, but autumn of the years and next spring are not few, and its ratio are 12.7 and 8.7 per cent. The first harvesting method is relatively normal with 88.8 per cent of ratio. From the viewpoint of harvesting method, picking leaves was applied with 97.7 per cent of ratio in young larvae rearing and picking shoot and picking shoot after harvest with branches were applied with 80.0 per cent of ratio in grown larvae rearing. The ratio of applying the harvesting method of picking leaves were 97.7 and 91.7 per cent in young larva and grown larva in autumn rearings. But there was also picking leaves absolutely with 7.1 per cent of ratio(Chunwon was 47 per cent) and yet, the farmers applying cutting before shooting in spring was no more than 17.8 percent.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.53-62
• /
• 2019

The purpose of this study was to establish the in vitro propagation system by shoot tip culture of six Hosta species native to Korea (Hosta capitata (Koidz.) Nakai, H. clausa Nakai, H. jonesii M.G.Chung, H. minor (Baker) Nakai, H. venusta F.Maek., and H. yingeri S.B.Jones) for mass proliferation and a new cultivar development. The shoot tips of each Hosta species were cultured on MS medium containing eight combinations of 0.5, 1.0, 2.0, 4.0 mg/L BA with 0.1 mg/L NAA, 0.1, 0.5, 1.0, 2.0 mg/L TDZ with 0.1 mg/L NAA, and without any PGRs (control). They were investigated on callus, somatic embryo, crown bud, differentiation and growth of shoot and root, total fresh weight after 8 weeks of culture. In all six Hosta species, callus and somatic embryo induction rate and multiple shooting rate of the PGRs treatment group were higher than that of the control group. The highest number of differentiated shoots were obtained on medium supplemented with 2.0 ㎎/L TDZ in H. capitata (5.4), 1.0 mg/L TDZ in H. clausa and H. jonesii (3.3 and 5.8, respectively), 0.5 mg/L BA in H. minor (11.1), 1.0 mg/L BA and 0.1 mg/L TDZ in H. venusta (8.1), and 0.5 mg/L TDZ in H. yingeri (9.8). In somatic embryo formation, the PGRs treatment group of H. jonesii and H. yingeri were more effective than the control group, and the effects were relatively less in H. capitata, H. clausa Nakai, H. minor, H. venusta. Crown bud formation of four Hosta species (H.capitata, H. clausa, H. jonesiig, and H. yingeri) were also higher in the PGRs treatment group than in the control group. Crown bud formation of four Hosta species (H.capitata, H. clausa, H. jonesiig, and H. yingeri) were also higher in the PGRs treatment group than in the control group. H. clausa showed no significant effect on callus and shoot differentiation regardless of the type and concentration of cytokinin, but slightly increased in formation of crown bud in TDZ.