• Journal of Preventive Medicine and Public Health
• /
• 제36권1호
• /
• pp.71-76
• /
• 2003

Objectives : New organizational work systems, and their impact on the mental health of employees, are considered to beone of the most important topics in the area of industrial health. This study was conducted to compare job characteristics (job demand and decision latitude) levels, and psychosocial distress of workers in acompany introducing to new organizational work systems, to those of workers managed by traditional work systems. Methods ; A study sample of 627 shipbuilding workers (446the new work organizational system and 181 the traditional system) were recruited for this study. A structured-questionnaire was used to assess general characteristics, job characteristics(work demand, decision latitude), and psychosocial distress. Results : The decision latitude was not significantly higher in the new work system compared to the traditional system. However, the job demand was significantly higher in the new work system than in the traditional system. The psychosocial distress was higher within the new work system than the traditional system, but no significant relationships were found. The proportion of increased strain was significantly greater with the new system than the traditional system. Conclusion : These results suggest that increases in the decision latitude did not sufficiently compensate for higher job strain or increased work intensity. If the increase in the decision latitude was temporary, with the typical job demand remaining high, such work can be still be considered to have a job strain Futureresearch should consider psychosocial distress and fatigue as importantproblems caused by new work organizational systems, and should be performed to assess their impact through out industry.

• 한국산업보건학회지
• /
• 제23권2호
• /
• pp.41-49
• /
• 2013

Objectives: The purpose of this study was to clarify the association between serum carcinoembryonic antigen (CEA) and type of work in the shipbuilding industry. Methods: 1,072 final study subjects were admitted to a general hospital from April through July 2010 for the purpose of medical examination. Data on general characteristics such as age, smoking history, alcohol history and exercise habits was gathered through structured self-administered questionnaires. Information on job factors was collected from a medical examination, by interview and through company personnel data. Serum CEA levels were measured after eight hours' fasting and were analyzed by a radioimmunoassay. Results: On univariate analysis, the mean serum CEA level was significantly higher among married (p=0.02), older age (p<0.01), longer work time (p<0.01), smokers (p<0.01), lower education (p<0.01), and indirect and direct exposure groups (p<0.01). On multiple regression analysis, serum CEA level was influenced by smoking (p=0.001), duration of work (p=0.019), and direct exposure group (p<0.001). However, among the direct exposure group, serum CEA level was not significantly different between welding, mounting, electro-device constructive work, grinding and cleaning, and painting. Conclusions: The goal of this research was to determine if there were differences between serum CEA levels according to occupational role among shipyard workers. The direct exposure group of shipyard workers had a relatively higher level of serum CEA than did the indirect exposure group and office workers, most likely due to occupational exposure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1510-1532
• /
• 2017

In smart grid, privacy implications to individuals and their families are an important issue because of the fine-grained usage data collection. Wireless communications are utilized by many utility companies to obtain information. Network coding is exploited in smart grids, to enhance network performance in terms of throughput, delay, robustness, and energy consumption. However, random linear network coding introduces a new challenge for privacy preserving due to the encoding of data and updating of coefficients in forwarder nodes. We propose a distributed privacy preserving scheme for random linear network coding in smart grid that considers the converged flows character of the smart grid and exploits a homomorphic encryption function to decrease the complexities in the forwarder node. It offers a data confidentiality privacy preserving feature, which can efficiently thwart traffic analysis. The data of the packet is encrypted and the tag of the packet is encrypted by a homomorphic encryption function. The forwarder node random linearly codes the encrypted data and directly processes the cryptotext tags based on the homomorphism feature. Extensive security analysis and performance evaluations demonstrate the validity and efficiency of the proposed scheme.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.75-82
• /
• 2008

Flame bending has been extensively used in the shipbuilding industry for hull plate forming In flame bending it is difficult to obtain the desired shape because the residual deformation dependson the complex temperature distribution and the thermal plastic strain. Mechanical bending such as reconfigurable press forming multi-point press forming or die-less forming has been found to improve the automation of hull plateforming because it can more accurately control the desired shape than line heating. Multi-point forming is a process in which external forces are used to form metal work-pieces. Therefore it can be a flexible and efficient forming technique. This paper presents an optimal approach to determining the press-stroke for multi-point press forming of curved shapes. An integrated configuration of Finite element analysis (FEA) and spring-back compensation algorithm is developed to calculate the strokes of the multi-point press. Not only spring-back is modeled by elastic plastic shell elements but also an iterative algorithm to compensate the spring-back is applied to adjust the amount of pressing stroke. An iterative displacement adjustment (IDA) method is applied by integration of the FEA procedure and the spring-back compensation work. Shape deviation between the desired surface and deform￡d plate is minimized by the IDA algorithm.

• 한국가스학회지
• /
• 제17권2호
• /
• pp.85-89
• /
• 2013

한국형 LNG선 화물창(KC-1)의 개발은 LNG선의 핵심기술인 화물창시스템의 원천기술을 확보하여 외화절감 및 조선 산업의 경쟁력을 높이는데 그 목적이 있다. 화물창 내부의 액체가 선박의 모션에 의해 생기는 슬로싱 충격 하중에 대한 LNG선의 화물창의 구조 안전성 평가는 중요한 설계 요소가 되었다. 슬로싱 현상에 의한 구조 안전성을 평가하는 가장 이상적인 방법은 유체 영역과 화물창 구조의 상호 작용을 완벽하게 구현하는 것이다. 그러나 유체-구조 연성해석은 방대한 계산 시간과 결과의 정확성을 보장하기 어렵기 때문에 불규칙적인 슬로싱 압력을 삼각파의 형태로 이상화하여 구조 안전성을 평가하였다. 따라서 본 연구에서는 슬로싱 압력은 15/1000초 동안에 최대 10bar의 압력으로 가정한 삼각파로 고려하였고, 해석 결과 한국형 LNG선 화물창(KC-1)의 보냉 판넬은 슬로싱 하중에 대해 구조적으로 건전한 것으로 평가되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1190-1199
• /
• 2014

As a considerable, experimental approach, an autocarriage type of $CO_2$ welding machine and a MIG(metal inert gas) welding robot in the inert gas atmosphere were utilized in order to realize Al 5083 welding to hull and relevant components of green leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc.) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, nonferrous material, applied to manufacturing of eco-environmental leisure ships. With respect to welding condition to minimize the thermal deformation, 150 A and 16 V at the wire-feed rate of 6 mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(heat affected zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5 mm thickness, 284.62 MPa of tensile strength and 11.41 % of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification (WPS).

• 한국항해항만학회지
• /
• 제33권6호
• /
• pp.375-380
• /
• 2009

1년 전까지만 해도 조선시황은 한없는 호항을 누릴 것으로 보였다. 그러나 2008년 후반에 찾아든 글로벌 경제의 불황은 바로 해운시장을 뒤흔들었고 그 여파는 바로 조선 사장에도 한없는 추락을 가져오고 있다. 저자들은 이러한 사태를 예견하여 이미 드라이 도크의 건조에 신중을 기할 것을 주장한 바 있다. 여기에 비하여 Floating Dock는 건조 비용도 덜 들고, 건조 기간도 짧고, 이동성마저 갖추고 있기 때문에 훨씬 더 유연한 도크 건설 방법이 될 수 있다. 그러나 Floating Dock는 대형의 블록을 탑재할 때 갑작스런 중량의 이동으로 인한 중심의 큰 변화로 안정성이 크게 위협 받게 된다. 따라서 안전하게 블록을 탑재하기 위하여서는 아주 고도의 정밀한 발라스트 작업이 수행되어야 한다. 본 연구에서는 육상에서 만들어진 거대 블록을 플로팅도크에 밀어 넣는 Skid Launching System을 위한 플로팅도크 제어 시스템을 완성하여 안정적인 SLS를 구현하고자 한다. 이를 위하여 저자들은 우선 가상의 진수 절차를 만들어 모의 조정하는 시뮬레이터를 개발(Kim et al. 2008)한 바 있다. 본 논문에서는 이시뮬레이션을 바탕으로 실시간 모니터링하면서 실시간 제어하는 시스템을 만들고 실제 진수에 적용하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1002-1010
• /
• 2015

Natural gas hydrates are newly emerging as an environment-friendly source of energy to substitute for fossil fuels in the 21stcentury.NGHs are reported to holds much amounts of natural gas (up to 182 standard volumes of gas per volume of hydrate); they are easy to store and safe to carry at about minus 20 degree Celsius under atmospheric pressure because of the self-preservation phenomenon of gas hydrates. The transporting method by gas-ice-hydrate ship carriers has been introduced and developed by a variety of industry and research institutions. Our team has been conducted to develop NGH total systems, including a breakthrough NGH carrier for sea transportation, since 2011. The NGH pellet carrier does not require a separate cooling system for cargo, and the initial temperature is maintained through insulation of the cargo tanks throughout the transport to the final destination. The heat conducted from the exterior and passing through the insulation material of the hull should be cut off as much as possible, but heat inflow inside the cargo tank from an external source is inevitable during transport. In this study, the heat transfer in a cargo tank of a 115K NGH carrier was analyzed through simulation with a commercial CFD code to estimate the boil-off gas/boil-off rate on the developed carrier and understand major hazards that could significantly impact the safety of the vessel.

• 해양환경안전학회지
• /
• 제19권1호
• /
• pp.71-77
• /
• 2013

Smart work는 정보통신기술을 이용하여 시간과 공간의 제약 없이 언제, 어디서든 근로자가 업무를 수행할 수 있는 유연한 근무형태를 의미한다. 스마트워크의 유형에는 모바일 오피스, 홈 오피스, 센터근무, 원격협업으로 분류할 수 있다. 태블릿PC나 스마트폰을 이용한 스마트워크 방식을 모바일 오피스라고 하며, 이동통신망과 휴대 단말기를 이용한 서비스를 제공하는 방식이다. 모바일 오피스는 무선환경과 스마트기기를 이용하여 움직이는 사무실을 구현하는 것으로 언제, 어디서나 사내 시스템에 접속하여 정보 검색은 물론 결재, 승인 등의 업무를 수행할 수 있다. 이러한 모바일 오피스 시스템을 조선소에 적용한다면, 실시간 처리로 근로자들의 생산성과 업무 효율성을 향상 시킬 수 있다. 따라서 본 연구는 조선업을 위한 HSE관리 모바일 어플리케이션 개발을 위해 기능을 추출하고 설계하는 것이 목적이다. 모바일용 HSE 관리 어플리케이션을 개발하기 위해 10개의 기능들을 추출하였고, ooCBD 방법론을 이용하여 설계하였다.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.367-375
• /
• 2012

In this study, hull form of main vessel of Korean large purse seiner fishing industry is developed for the improvement of resistance performance as well as for the satisfaction to the Standard of Fishing Convention, ILO. Through the modification of reference hull form parameters and local characteristics, the hull form development is carried out. The optimum hull form parameters are searched by Sequential Quadratic Programing(SQP) method with the power estimation method of Holtrop & Mannen. To minimize the wave resistance, bulbous bow parameters are determined by the bulbous bow design method of Alvarino. The plasmatic curve is redesigned from that of the reference hull by using Lackenby method. The resistance performances of the reference and designed hull forms are estimated by using numerical simulation method. Also, the judgment of seakeeping ability and the estimation of intact stability for the designed hull form is carried out. As a result, the optimum hull form is proposed. To verify the improvement of resistance performance, model tests are carried out in towing tank. The results show that the resistance of the designed hull form is about 14% smaller than that of the reference hull from at design speed. A new hull form proposed in this study can contribute to the development of the main vessel hull form of Korean large purse seiner fishing system.