• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.9-12
• /
• 2004

The effect of x wt% CuO-y wt% $V_2O_5$ content on the microwave properties of $(Pb_{0.45}Ca_{0.55})[(Fe_{0.5}Nb_{0.5})_{0.9}Sn_{0.1}]O_3$ (PCFNS) ceramics was investigated. In order to decrease the sintering temperature and use as a Low Temperature co-firing Ceramics (LTCC), CuO-$V_2O_5$ are added in the PCFNS. The bulk density, dielectric constant (${\varepsilon}_r$) and quality factor(Q${\cdot}f_0$) increased with increase in CuO content within a limited value. The microwave properties were degraded with increases in $V_2O_5$ content. The temperature coefficient of the resonant frequency (${\tau}_f$) of PCFNS was shifted to positive value abruptly with increasing the $V_2O_5$ content, while the ${\tau}_f$ was slightly shifted to positive value with increasing the CuO content. The optimized microwave properties, ${\varepsilon}_r$ = 88, Q${\cdot}f_0$ = 6100 (GHz), and ${\tau}_f$ = 18 ppm/$^{\circ}C$, were obtained in $(Pb_{0.45}Ca_{0.55})[(Fe_{0.5}Nb_{0.5})_{0.9}Sn_{0.1}]O_3$ with 0.2wt% CuO 0.05 wt% $V_2O_5$ and sintered at $1000^{\circ}C$ for 3 h. The relationship between the microstructure and microwave dielectric properties of ceramics was studied by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM)

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.193-199
• /
• 2006

${\gamma}-Al_2O_3$에 담지한 Cu-Mn 산화물 촉매에서 톨루엔 완전산화 반응을 $160{\sim}280^{\circ}C$의 온도 범위에서 고정층 반응기로 조사하였다. BET, SEM, TPR, TPO, XPS 및 XRD를 이용하여 촉매 특성분석을 하였다. 톨루엔의 완전산화 반응은 $280^{\circ}C$ 이하에서 이루어졌으며, 적절한 Cu-Mn 담지량은 15.0 wt％Cu-10.0 wt％Mn인 것으로 나타났다. TPR/TPO 및 XPS 분석 결과, 15 Cu-10 Mn 촉매의 산화환원 봉우리가 낮은 온도로 이동하였으며 결합에너지가 높은 값으로 이동하였다. XRD 결과, 고분산된 Mn 산화물과 CuO 보다 $Cu_{1.5}Mn_{1.5}O_4$의 촉매활성 인자로서의 역할이 더욱 우수한 것으로 추측되며, 촉매의 활성은 촉매의 산화환원 능력과 촉매의 높은 산화 상태에 기인하는 것으로 사료된다.

• 지구물리와물리탐사
• /
• 제17권2호
• /
• pp.95-103
• /
• 2014

MT 자료에서 3차원 전기비저항 구조와 정적효과를 동시에 구하기 위한 실용적인 역산법을 소개한다. 이 방법은 감도행렬이 필요한 Gauss-Newton법을 기반으로 하고 반복과정에서 Broyden의 방식으로 감도를 수정하는 것을 기본으로 하고 있다. 이 논문에서는 합성 MT 자료에 대한 역산실험을 통해 근사역산법의 성능과 정적효과에 대한 가중치에 대해 검토하였다. 해석적으로 구해지는 초기감도를 Broyden의 방식으로 수정하는 역산법은 초기감도를 끝까지 쓰는 역산법보다 자료오차를 줄이는데 효과적이었다. 그리고 완전한 감도행렬을 반복 중간에서 단 한번만 사용하는 근사역산법으로서는 반복 전반부에서 완전한 감도를 사용할 때 자료오차를 가장 많이 줄이는 것으로 나타났다. 정적효과에 대한 가중치는 어느 특정 한계값 이하로 선택하면 최종 자료오차에는 결정적인 영향을 주지 않는다. 합성 MT 자료에 대한 실험 결과 이 역산법은 정적효과가 포함된 MT 자료로부터 3차원 전기비저항 구조를 재현하는데 효과적임을 확인하였다.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.508-512
• /
• 2012

ZnO thin films were grown on a sapphire substrate by RF magnetron sputtering. The characteristics of the thin films were investigated by ellipsometry, X-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL), and Hall effect. The substrate temperature and growth time were kept constant at $200^{\circ}C$ at 30 minutes, respectively. The RF power was varied within the range of 200 to 500 W. ZnO thin films on sapphire substrate were grown with a preferred C-axis orientation along the (0002) plan; X-ray diffraction peak shifted to low angles and PL emission peak was red-shifted with increasing RF power. In addition, the electrical characteristics of the carrier density and mobility decreased and the resistivity increased. In the electrical and optical properties of ZnO thin films under variation of RF power, the crystallinity improved and the roughness increased with increasing RF power due to decreased oxygen vacancies and the presence of excess zinc above the optimal range of RF power. Consequently, the crystallinity of the ZnO thin films grown on sapphire substrate was improved with RF sputtering power; however, excess Zn resulted because of the structural, electrical, and optical properties of the ZnO thin films. Thus, excess RF power will act as a factor that degrades the device characteristics.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2906-2910
• /
• 2011

A fluorescent nucleoside analogue, $^AC$, featuring two non-complementary nucleobases linked through an ethynyl group, was synthesized. The extended ${\pi}$-conjugation imparts $^AC$ with red-shifted absorbance (relative to adenine and cytosine) and pale-blue fluorescence. It spontaneously forms nanoparticles, which exhibit considerably enhanced fluorescence, without the help of any additional stabilizing agent. The DMSO/water ratio was an important factor influencing the construction of the NPs. X-ray crystallography confirmed the structure of $^AC$; dynamic light scattering and scanning electron microscopy confirmed the existence of the nanoparticles.

• Journal of Ecology and Environment
• /
• 제31권3호
• /
• pp.201-206
• /
• 2008

This study was conducted to determine clutch size and habitat usage of Kentish plovers (Charadrius alexandrinus) breeding on Sinja-do lslet in the Nakdong Estuary from 22 April to 12 July in 1995 and from 21 April to 20 June in 1996. The Kentish plover preferred grasslands and damp sands to dry dunes as nesting sites. The difference in hatching success among these microhabitats was attributed to high tides, which washed away many nests on damp sands, and strong winds, which frequently shifted the sand to bury eggs on dry dunes. The main mortality factor in grasslands was predation by magpies Pica pica. Each clutch contained one to four eggs, with a mode of three eggs. Hatching success was highest in two-egg clutches and lowest in one- and four-egg clutches. The mean interval for egg laying was 1.8 days between the first and second eggs and 2.1 days between the second and third eggs. The average incubation period was about 24.2 days.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.556-558
• /
• 1994

This paper proposes a new converter that can reduce the harmonics like conventional 12-pulse dual thyrister converters with the input transformers. Both the bridges are controlled with the shifted firing angle and connected through current sharing reactors. Using the center tapped reactor, the DC link current is controlled with the different two values in order to make the input current waveform 12 pulses.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.369-374
• /
• 2001

Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers big power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shaped curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, it is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. This paper describes a mathematical model of profile shifted involute gear. and this model is based on Camus's theory. We draw three dimensions gear have accurate mathematical function using ADS, VisualLISP. and To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• Journal of Microbiology and Biotechnology
• /
• 제18권8호
• /
• pp.1470-1474
• /
• 2008

Nitrospira is a dominant member of nitrite-oxidizing bacteria (NOB) in nitrifying bioreactors as well as in natural habitats. In this study, Nitrospira NOB were investigated in the two nitrifying reactors operated with high and low dissolved oxygen (DO) concentrations for a period of 300 days. Phylogenetic and terminal restriction fragment length polymorphism analyses based on 168 rRNA gene sequences revealed that the Nitrospira community compositions of the two reactors during the early period related to group 1 and half of the Nitrospira community composition shifted to group 2 in the high-DO reactor after day 179, although there was no significant change in the low-DO reactor. These results suggested that DO was an important factor affecting Nitrospira community compositions in the nitrifying reactors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2671-2673
• /
• 1999

Front end AC to DC converters of the boost type are used in traction applications for generating the DC link for the inverters. A GTO based converter is usually switched with a switching frequency of 300 to 500Hz, resulting in low frequency harmonic problems. In order to avoid this, multiple converters with phase shifted carrier signals are used to suppress the low frequency harmonics. A detailed study of an AC to DC converter, parallel operated with reduced sensor and improved power-factor in light load conditions is presented in this paper.