• 한국전자파학회지:전자파기술
• /
• 제2권2호
• /
• pp.25-29
• /
• 1991

본 논문에서는 전자기파의 기본 차폐식을 이용하여 금속인 모재에 얇은 두께의 박판으로 접합되어 있는 경우의 차례이론식을 유도하여, 대표적인 금속 평판 쉴드로 비자성 재료인 Aluminium과 Steel에 전도성도료를 칠했을 경우에 평면파에 대한 차폐 효과를 조사하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.413-416
• /
• 2001

In high frequency range, RF circuit design without considering shielding effect can cause several significant changes due to increase in parasitic capacitance and inductance between RF signal lines and shielding box. In this paper, bandpass filter has been made to measure the shielding effect and its s-parameter has been measured by Vector Network Analyzer (VNA). Equivalent circuit model including the shielding effect has been constructed with the lumped elements extracted from the 3D electromagnetic simulator, Maxwell SI. Then, the validity of the model is verified using microwave circuit simulator, ADS (Advanced Design System).

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.385-388
• /
• 2008

Four kinds of PET fabrics were coated with Copper and Nickel by electroless chemical plating, and the electromagnetic wave shielding effectiveness for those samples have been examined. The shielding effectiveness showed between 90 dB and 70 dB, and it related to the fabric structure, such as cover factor and cloth density. The dense fabric structure showed the better shielding effect.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.30-40
• /
• 2013

In this study the method based on flux linkage in cell was introduced in calculation of eddy currents by cell method. According to this method eddy current distribution and the loss can be evaluated and since the shielding effectiveness by flux cancelation of eddy current can be analyzed, this method is applicable to design of conductive shield. And also the formula of shielding factor were so deduced as to be applicable to finite-width infinite-length shielding sheets and infinite-length underground cable shield. These formula are adaptable to magnetic materials as well as conductive materials. As the results of calculation in model shields are follows. In case of finite-width infinite-length shielding sheet, shielding effectiveness increases with increasing of conductivity. In case of infinite-length underground cable shield, the effectiveness become higher with increasing of permeability. Especially the effectiveness is very high in materials with both high conductivity and permeability in underground cable shield.

• 한국위성정보통신학회논문지
• /
• 제8권3호
• /
• pp.20-24
• /
• 2013

본 논문에서는 HEMP의 개념을 소개하고, 안테나 요소의 배치 변화에 따른 방호 효율성을 분석한다. 높은 주파수의 EMP를 맥스웰 방정식을 이용하여 LOS에서 근사한다. 전자기파 감쇄의 영향을 분석하기 위하여, 차폐룸을 구성하여 측정 데이타를 얻는데 이용한다. 수신 안테나의 거리와 주파수를 변화시켜 차폐 정도를 측정한다. 기준이 되는 미국 규격문서와 측정값을 비교하고 측정방법을 간소화해본다. 차폐룸 내부를 3가지 조건으로 만들어 변화를 차폐 정도를 측정한다. 정방향 측정과 역방향 측정의 차이를 살펴보고 차폐룸 측정에 영향을 미치는 요소를 찾는다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.243-244
• /
• 2011

In general, magnetite or barite (density: more than 4.0ton/㎥) has been used in concrete for radiation shielding, and radiation tests have been performed to evaluate shielding performance. However, researchers have not studied concrete for radiation shielding that utilizes electric arc furnace oxidizing slag. This research aims to utilize electric arc furnace oxidizing slag which depends on reclamation as environment-friendly concrete materials by using coarse and fine aggregates of electric arc furnace slag containing 30% ferrous metal and with a density of around 3.0~3.8 ton/㎥. Accordingly, this research has judged that the high density electric arc furnace oxidizing slag aggregate can be applied to radiation shielding concrete. It has also examined the possibility of developing radiation shielding concrete utilizing electric arc furnace oxidizing slag aggregate by comparing concrete utilizing all fine and coarse aggregate of electric arc furnace oxidizing slag with concrete using magnetite.

• 한국의류학회지
• /
• 제29권1호
• /
• pp.149-156
• /
• 2005

The purpose of this study was to produce the high quality of electromagnetic wave shielding fabrics. In this study, we have produced polyester fabrics by electroless Ag plating. The untreated polyester was etched with $4\%$ NaOH solution added accelerant(Benzyl Dimethyl Dodecyl Ammonium Chloride) then it was catalyzed by $SnCl_2$ solution and activated by $PdCl_2$ solution. Electroless Ag plating was carried out by changing conditions such as temperature. time, weight loss rate of polyester and kind of reducing agents. The electromagnetic wave shielding effectiveness of polyester fabric by electroless Ag plating was measured by RF Impedance Analyzer and element of electromagnetic wave shielding substance was measured using Electron probe micro analyzer. The results were as follows; The plating bath using potassium sodium tartrate by reducing agent was excellent electromagnetic wave shielding effectiveness. Element of electromagnetic wave shielding substance was silver. Electromagnetic wave shielding effectiveness was shown over 64dB at the temperature of $40^{\circ}C$, treating time 30min., weight loss rate $20\%$.

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.71-78
• /
• 2010

The objective of this research is to investigate the influence of material characteristic and design on to the electromagnetic interference (EMI) shielding characteristics. Basalt glass fiber reinforced composite specimens with stainless fiber conductive filler were manufactured to perform the electromagnetic interference shielding effectiveness(SE) experiments. In order to reflection and absorb the specimen in electromagnetic fields, flanged coaxial transmission line sample holder was fabricated according to ASTM D 4935-89. Electromagnetic shielding effectiveness(EMSE) was measured quantitatively to examine the electromagnetic shielding characteristics of designed specimens. The result of EMI shielding experiments showed that maximum EMSE value of sandwich type specimens with GSG(basalt glass fiber/stainless fiber/basalt glass fiber) and SGS(stainless fiber/basalt glass fiber/stainless fiber) were 65dB and 80dB at a frequency of 1,500MHz, respectively.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.42-47
• /
• 2004

The main objective of this work is to develop melt-blown nonwoven fabric composite materials have electromagnetic shielding characteristics using thin copper film. Melt-blown nonwoven fabric is the matrix phase and thin copper films are the reinforcement of the composite materials. Thin copper films are incorporated as conductive fillers to provide the electromagnetic shielding property of the melt-blown nonwoven fabric. The width and interval of thin copper films in the nonwoven fabric are varied by changing 1, 3, 5 mm for thin copper film's width and 1, 3, 5 mm for thin copper film's interval. The shielding effectiveness(SE) of various melt-blown nonwoven fabrics is measured in the frequency range of 50 MHz to 1.8 GHz. The variations of SE of melt-blown nonwoven fabric with width and interval of thin copper films are described. Suitability of melt-blown nonwoven fabric for electromagnetic shielding applications is discussed. The results indicate that the melt-blown nonwoven fabric composite material using thin copper film can be used for the purpose of electromagnetic shielding.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.756-761
• /
• 2019

본 논문에서는 기존 4H-SiC SJ UMOSFET 구조의 p-pillar을 기존 UMOSFET의 shielding 영역 아래로 배치시키는 SC-SJ(Shielding Connected-Super Junction) UMOSFET 구조를 제안한다. 제안한 SC-SJ UMOSFET의 경우 p-pillar와 shielding 영역이 공존하여 산화막에서 전계에 의한 항복이 발생하지 않도록 하며, 이는 pillar의 도핑 농도 상승을 가능하게 한다. 결과적으로 온저항을 낮춤으로서 소자의 정적 특성을 개선한다. Sentaurus TCAD 시뮬레이션을 통해 기존 구조와 제안한 구조의 정적 특성을 비교, 분석하였다. 제안한 SC-SJ UMOSFET은 기존 구조에 비해 항복전압의 변화 없이 50% 감소된 온저항을 얻을 수 있다.