Browse > Article
http://dx.doi.org/10.5207/JIEIE.2013.27.10.030

Analysis of Shielding Effectiveness and Estimation of Shielding Factor in Conductive and Magnetic Shields  

Kang, Dae-Ha (Department of Electrical Engineering, Pukyong National University)
Publication Information
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers / v.27, no.10, 2013 , pp. 30-40 More about this Journal
Abstract
In this study the method based on flux linkage in cell was introduced in calculation of eddy currents by cell method. According to this method eddy current distribution and the loss can be evaluated and since the shielding effectiveness by flux cancelation of eddy current can be analyzed, this method is applicable to design of conductive shield. And also the formula of shielding factor were so deduced as to be applicable to finite-width infinite-length shielding sheets and infinite-length underground cable shield. These formula are adaptable to magnetic materials as well as conductive materials. As the results of calculation in model shields are follows. In case of finite-width infinite-length shielding sheet, shielding effectiveness increases with increasing of conductivity. In case of infinite-length underground cable shield, the effectiveness become higher with increasing of permeability. Especially the effectiveness is very high in materials with both high conductivity and permeability in underground cable shield.
Keywords
Flux Linkage; Eddy Current; Conductive Shield; Shielding Factor; Magnetic Material; Underground Cable Shield;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Theodoulidis T., "Exact solution of Pollaczek Integral for evaluation of earth-return impedance for underground conductor", IEEE Trans. Electromagn. Compati., Vol. 54, No. 4, pp. 806-814, 2012.   DOI   ScienceOn
2 Pablo Mareno and Robert G. Olsen, "A method for estimating magnetic shielding by 2-D-thik plates for distribution systems shielding," IEEE Trans. Power Delivery, Vol. 25, No. 4, pp. 2710-2716, 2010.
3 Sang Beom Kim, Joon Young Soh, Koo Yong Shin, Jin Hye Jeong and Sung Ho Myung, "Magnetic shielding performance of thin metal shields near power cables", IEEE Trans. Magn., Vol. 46, No. 2, pp. 682-685, 2010.   DOI   ScienceOn
4 Massino Guarnieri, Federico Moro and Roberto Turri, "An integral method for extremely low frequency magnetic shielding", IEEE Trans. Magn., Vol. 41, No. 3, pp. 1376-1379, 2005.   DOI   ScienceOn
5 Aldo Canova, Alessandra Manzin and Michele Tartaglia, "Evaluation of different analytical and Semi-analytical methods for the design of ELF magnetic shielding shields", IEEE Trans. Ind. Appl., Vol. 38, No. 3, pp. 788-796, 2002.   DOI   ScienceOn
6 Yaping Du, T. T. Cheng and A. S. Frag, "Principles of power-frequency magnetic field shielding with flat sheets in a source of long conductors", IEEE Trans. Electromagn. Compati., Vol, 38, No. 3, pp. 450-459, 1996.   DOI   ScienceOn
7 Aldo Canova, Giambattista Grosso and Maurizio, "Integral method for analysis and design of low-frequency conductive shields", IEEE Trans. Magn., Vol. 39, No. 4, pp. 2009-2017, 2003.   DOI   ScienceOn
8 Jun Jou, Mo Li, Jaebok Lee and Sughun Chang, "Calculation of the magnetic field in air produced by the underground conductor using Pollaczek Integral", IEEE Trans. Electromagn. Compati., Vol. 54, No. 1, pp. 198-204, 2012.   DOI   ScienceOn