Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.
서론 :정위방사선치료는 높은 정밀도로 크기가 작고 구형인 병변에 국한하여 방사선을 조사할 수 있는 기술이지만 병변의 모양이 구형이 아닌 경우에는 병변 주변의 정상조직에 고선량의 방사선이 조사될 수 있다. 본 연구는 독립턱을 부분적으로 폐쇄하여 방사선량 분포를 개선하는 방법, 선량계산과 선량분포의 도시방법을 보고하고자 한다. 방법 :정위방사선치료 시의 호의 궤적상 병변은 방사선조사영역 내에 포함하면서 주변 정상조직을 최대한 차폐하도록 원형 콜리메이터와 독립턱 부분페쇄를 적절히 조합하였다. 물 펜톰과 마이크로 전리함을 이용하여 출력인자와 조직최대선량비를 측정하여 이론적 계산치와 비교하였다. 필름선량측정계를 이용하여 5 cm 깊이에서의 심부선량분포를 측정하여 계산치와 비교하였다. 이와 같은 측정자료를 자가 개발한 치료계획 프로그램에 반영하여 뇌전이 환자의 정위 방사선치료 선량계산과 도시에 적용하여 원형 콜리메이터만을 이용하였을 경우와 독립턱 부분폐쇄를 추가하였을 경우의 병변과 정상 뇌의 선량체적표를 각각 비교하였다. 결과 : 5.0 cm 직경의 원형 콜리메이터를 사용하고 한 쪽 독립턱을 중심축으로부터 30 mm, 15.5 mm, 8.6 mm, 0 mm 까지 열었을 때 측정한 출력인자와 조직최대선량비는 계산치와 각각 0.5%와 0.3%의 오차범위로 잘 부합하였다. 필름선량계로 얻은 5 cm 깊이의 심부선량분포도 역시 계산치와 잘 부합하였다. 자가 개발한 치료계획 프로그램으로 병변과 정상 뇌의 선량체적표를의 상호 비교를 통하여 독립턱 부분폐쇄를 적용한 경우에 있어서 보다 개선된 선량분포를 얻을 수 있음을 확인하였다. 결론 : 정위방사선치료에 있어서 독립턱의 부분폐쇄를 적용함으로써 보다 개선된 선량분포계획을 얻을 수 있으며 이를 적용하여 비교적 크기가 크고 모양이 불규칙한 병변에 대하여도 정위방사선치료를 확대 적용할 수 있겠다.
현재 다양한 종류의 니켈 티타늄 파일 시스템이 근관 치료에 사용되고 있지만, 한 종류의 기구로 복잡한 구조의 근관을 모두 치료하기는 어려운 실정이다. 따라서 여러가지 파일 시스템의 각기 다른 장점을 같이 이용하여 임상에서 더 쉽고, 정확하게 근관 성형을 하기 위해 hybrid method를 사용한다. ProTaper는 초기 근관 확대 효율성이 좋지만 근단부 성형에 여러가지 부적절함이 지적되어왔으며 근래에 이러한 문제점을 보완한 ProTaper Universal이 시판되었다. 본 연구의 목적은 ProTaper 및 ProTaper Universal과 ProTaper Universal의 S-series와 ProFile 혹은 Hero Shaper를 사용한 hybrid method의 근관성형 효율을 비교하는 것이다. 경력 10년의 근관치료전문의가 레진 블록 근관을 한 방법으로 25개씩, 모두 100개를 형성하였다. 근관성형 소요 시간 및 성형 전후의 근관 만곡이나 만곡 반경의 변화, 근관 이형성 여부 및 이미지 중첩을 통해 치근단으로부터 1, 2, 3, 4, 5 mm 위치에서 근관삭제량, 근관중심변위율을 산출, 비교하여 다음과 같은 결과를 얻었다. 1. 시술 시간의 경우, ProFile이 가장 많은 성형 시간을 필요로 하였고, ProTaper Universal이 ProTaper보다 더 빠른 성형 시간을 나타냈다(p < 0.05). 2. 근관 삭제량에 있어서도 ProFile이 가장 적은 삭제량을 나타냈으며, 전반적으로 ProTaper Universal이 ProTaper보다 적은 삭제량을 보였다(p < 0.05). 3. 근관 중심 변위율은 ProFile이 가장 좋은 중심 유지율을 보였으나(p < 0.05), 다른 군은 큰 차이가 발견되지 않았다. 4. 다른 관찰 항목에서도 유의할만한 차이를 보이지 않았다. 이 실험 조건하에, ProTaper Universal이 ProTaper에 비해 성형 시간이나 삭제 폭경 등 성형 효율이 개선된 면이 있는 것으로 판단되며 능숙한 술자의 경우 만곡도가 큰 근관에서 FroTaper Universal이 다양한 파일을 사용하는 hybrid technique만큼 충분한 효율성을 가진 것으로 추정된다.
Objectives: This preliminary study compared the effects of glide path establishing instruments prior to substantial root canal preparation. Materials and Methods: Glide path was established by enlargement of the 2nd mesiobuccal root canal of Dentalike by using three kinds of glide path preparation nickel-titanium file; PathFile, One G and ProGlider. The pre- and post-instrumented Dentalikes were weighed in the resolution of 1 / 10mg. In addition, after glide path preparation, torque generated during shaping using the WavoOne file was measured. The data were analyzed by one-way ANOVA and Tukey post-hoc test at a significance level of 95%. Results: The ProGlider had the significantly larger amount of reduced weight than other instrument groups (p < 0.05). There was no significant difference between group of glide path preparation with ProGlider and without glide path preparation in maximum torque and total stress generation during the shaping with WaveOne. Conclusions: Glide path preparation instruments may have different efficiency according to their geometries. The Dentalike artificial teeth were revealed to have discrepancies in the size of root canals by microCT examination. It is impossible to make a meaningful judgment of the results due to the reliability or resolution problem of the root canal size of the artificial tooth selected as the standardized tooth.
대표적인 비디오 스트리밍 서비스인 MPEG은 특성상 영상에 따라 프레임의 데이터 크기가 변동하며 QoS를 만족하기 위한 대역폭이 시간에 따라서 변동하게 된다. 따라서 인터넷을 통한 비디오 스트리밍 서비스에 있어서 망 관리 측면에서 비디오 스트리밍 서비스의 우선순위를 높게 부여하더라도 예기치 못한 혼잡상황에서는 순간적인 대역폭 부족으로 인하여 영상이 끊어지는 현상이 발생할 수 있다. 본 논문에서는 MPEG 특성에 맞는 대역폭 할당 및 트래픽 엔지니어링 방안을 고찰하였다. 인터넷 트래픽 양의 시간적 변동패턴을 기반으로한 LSP 설정과 고정 대역폭 할당을 통하여 지연시간을 단축과 전송효율 향상을 기하고 인입 라우터에서 CQ_LLQ 방식을 적용한 트래픽 shaping 과정을 통해 QoS를 만족할 수 있도록 하였고 OPNET을 이용한 컴퓨터 시뮬레이션을 통하여 제안한 방안의 성능을 확인하였다.
Emmanuel Joao Nogueira Leal da Silva;Sara Gomes de Moura;Carolina Oliveira de Lima;Ana Flavia Almeida Barbosa;Waleska Florentino Misael;Mariane Floriano Lopes Santos Lacerda;Luciana Moura Sassone
Restorative Dentistry and Endodontics
/
제46권2호
/
pp.16.1-16.11
/
2021
Objectives: The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison. Materials and Methods: Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups (n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level. Results: No significant differences in the percentage of unprepared area were observed among the systems (p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems (p < 0.05). The systems produced similar volumes of apically extruded debris (p > 0.05). Conclusions: All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems.
During rolling, rolling mill rolls endure wear when shaping metal billets into a desired form, such as bars, plates, and shapes. Such wear affects the lifespan of the rolls and product quality. Therefore, in addition to rigidity, wear performance is a key factor influencing the performance of rolling mill rolls. Conventional methods such as casting and forging have been used to manufacture rolling mill rolls. However, powder alloying methods are increasingly being adopted to enhance wear resistance. These powder manufacturing methods include atomization, canning to shape the powder, hot isostatic pressing to combine the powder alloy with conventional metals, and various wear performance tests on rolls prepared with powder alloys. In this study, numerical simulations and experimental tests were used to develop and elucidate the wear analysis mechanism of rolling mill rolls. The wear characteristics of the rolls under various rolling conditions were analyzed. In addition, experimental tests (wear and surface analysis tests) and wear theory (Archard wear model) were used to evaluate wear. These tests were performed on two different materials in various powder states to evaluate the different aspects of wear resistance. In particular, this study identifies the factors influencing the wear behavior of rolling mill rolls and proposes an analytical approach based on the actual production of products. The developed wear analysis mechanism can serve the future development of rolls with high wear resistance using new materials. Moreover, it can be applied in the mechanical and wear performance testing of new products.
이 연구의 목적은 $ProTaper\^{(R)}$ S1과 3가지 종류의 파일을 각각 같이 사용하는 혼합법의 근관성형 효율을 비교해 보는 것이다. 5년 이상의 임상경력을 가진 치과의사 20명이 Ni-Ti파일 경험자군과 비경험자군으로 나뉘어, $ProTaper\^{(R)}$만을 사용한 C군과 $ProTaper\^{(R)}$ S1과 함께 세 종류의 파일 시스템- $ProFile\^{(R)}$ (P군), $HeroShaper\^{(R)}$ (H군), $K-Flexofile\^{(R)}$ (S군)을 혼합 적용하여, 각각의 방법으로 레진 근관을 성형하였다. 성형 전후 이미지를 중첩 시켜 근관형태 이상을 조사하고, 근단공부터 1, 2, 3mm 위치에서 근관 폭경의 변화량, 중심 변위율을 산출, 비교하여 다음의 결과를 얻었다. C군과 S군 모두 다른 실험군에 비해 성형시간이 많이 소요되었다. 경험자군에 비해 비경험자군에서는 C군과 H군에서 더 많은 시간이 소요되었다 P군의 중심변위율은 $ProTaper\^{(R)}$만을 사용한 C군이나 SS파일을 사용한 S군보다 양호하였다. 마찬가지로, 경험자군의 경우에서는 P군에 추가하여 H군도 더 나은 결과를 보였다 (p<0.05). 이 실험 조건하에, $ProFile\^{(R)}$과 $HeroShaper\^{(R)}$를 사용한 혼합법이 $ProTaper\^{(R)}$만을 사용한 성형방법보다 더욱 추천된다.
Polycrystalline diamonds(PCD) tools are widely used in machining a large variety of advanced materials. However, the manufacture of PCD tool blanks is not an economical process. The shaping of PCD blanks with conventional machining methods(such a grinding) is long, labor-intensive process. This paper reports experimental investigation of the influence of electrical machining conditions on the metal removal rate of WEDM of PCD. Experimental results show that the longer pulse-on time and the shorter pulse-off time increase the metal removal rate and worsen the surface quality. The smaller grain size of diamond yields the metal removal rate and shows the better surface quality. Higher electrical conductivity of water yields worse surface roughness.
Expressing transparency has various significances in modem society because modern people want transparent objects and space due to the complication, numerous unreasonable facts and the lack of honesty in the society. It is necessary to summarize the processes of changes in transparent materials that have been substantially emerging in the areas of indoor spaces and furniture since the 1960s by organizing the concepts such as the characteristics of materials, the processes of development and the methods of shaping centering on representative artists and works. And the concept of transparency in terms of space enabled the expansion, overlapping and connection of spaces. It can be said that these factors express the openness, purity and non-materiality of spaces. It can also be connected to the thought of minimal ism and this concept could be confirmed by analyzing the works of the famous designers leading the times.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.