• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.350-355
• /
• 2008

A Rubber mount is widely used for mechanical parts or engineering materials. Especially, it plays an important role in reducing mechanical vibration due to cyclic loading. But, rubber mount is damaged due to the cyclic loading and resonance. Therefore, it is necessary to investigate evaluation of fatigue life considering vibration characteristics for rubber. In this study, a vibration fatigue analysis was performed and based on Power Spectral Density(PSD) and the stress-life curve and a result of frequency response analysis in the finite element method. The measured load history in experiment was transformed to PSD curve. The stress-life curve was obtained by nonlinear static analysis and fatigue test. In addition, frequency response analysis was conducted for mechanical part. In order to evaluate fatigue life of rubber mount, vibration fatigue test was conducted at the constant acceleration-level as well. Fatigue life was determined when the load capacity is reduced to 60% of its initial value. As a result, predicted fatigue life of rubber mount agreed fairly well with the experimental fatigue life.

• 한국미생물·생명공학회지
• /
• 제13권3호
• /
• pp.223-232
• /
• 1985

한국의 토양에서 분리한 균 중 bacterial $\alpha$-amylase에 저해효과가 있는 균주를 분리하여 DMC-47 균주라 명명하였고, 이 균주는 Streptomyces 속의 균임을 확인하였다. 이 균주를 옥수수 전분 배지에서 진탕 배양한 결과 4일후에 최대 저해 효과를 나타내었다. 이 균주가 생성한 저해물질은 bacterial $\alpha$-amylase, pancreatic $\alpha$-amylase, salivary $\alpha$-amylase, glucoamylase에 저해효과를 보였고, $\beta$-amylase 에는 저해효과가 없었다.

• 한국음향학회지
• /
• 제10권1호
• /
• pp.30-36
• /
• 1991

음향 재질의 복소수 모듈러스(Complex Young's modulus)는 정적하중하에서 주파수에 따라 변하므로 재질의 동특성 규명을 위해 손실을 가지는 rod로 모델링 된 원통형 시편을 사용, 한쪽 끝은 가진기로 축방향 조화가진을 하고, 타단에서는 부가 질량체를 부착시켜 이의 전달 함수를 구한다. 전달 함수 방법은 축방향으로 가진된 rod로 모델링하여 가진기의 주파수 범위인 50~20000Hz에서 이론 및 실험적으로 해석된다. 또한 발생가능한 오차의 원인을 규명하고자 시편이가지는 포아송비(Poisson's ratio)에 기인한 측면운동, 끝단효과(End Effect), 손실계수가 작은 경우의 측정오차 및 시편 끝단의 접착제 효과를 분석하였으며 형상계수의 도입에 의해 측면운동에 의한 오차를 보상하였다.

• 센서학회지
• /
• 제11권4호
• /
• pp.200-208
• /
• 2002

This paper represents the development of an array-type flexible tactile sensor using PVDF(polyvinylidene fluoride) film and flexible circuitry. The tactile sensor which has $8{\times}8$ taxels is made by using PVDF film and FPC(flexible printed circuit) technique. Experimental results on static and dynamic properties are obtained by applying arbitrary forces and frequencies generated by the shaker. In the static characteristics, the threshold and the linearity of the sensor are investigated. Also dynamic response of the sensor subjected to the variable frequencies is examined. The signals of a contact force to the tactile sensor are sensed and processed in the DSP system in which the signals are digitalized and filtered. Finally, the signals are integrated for taking the force profile. The processed signals of the outputs of the sensor are visualized on a personal computer, the shape and force distribution of the contacted object are obtained using two and three-dimensional image in real time. The reasonable performance for the detection of contact state is verified through the experiment.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.23-32
• /
• 2015

In this study, chemical and physical changes of dissolving pulps which have similar viscosity by dry milling and fractionation were investigated. We used two types of dissolving pulp made from wood and cotton linter fiber, respectively. Dry milling was executed by knife cutter and pulp powders were fractionated by sieve shaker into 4 grades. We analyzed fiber properties, crystallinity index, viscosity, molecular weight of pulp sheet and powders. It was found that poly-dispersity index of cotton linter pulp was smaller than that of wood pulp, meaning that cotton pulp has more narrow molecular weight distribution. It was assumed that these were related to exposure times to chemical treatment which cut cellulose chains not evenly. At least 4 times of chemical treatments for wood pulp were executed and only two times of chemical treatments for cotton linter pulp were done. After dry milling average molecular weight and crystallinity index of cotton linter pulp powders were reduced and these were related to fines content and shape of pulp powders.

• 식물병연구
• /
• 제21권3호
• /
• pp.231-234
• /
• 2015

Elsinoe fawcettii and E. australis are two currently recognized scab pathogens of citrus. E. fawcettii has at least six pathotypes while E. australis has at least two pathotypes. Colonies of E. fawcettii and E. australis do not sporulate in artificial media including potato dextrose agar (PDA). Whiteside's method has been widely used for preparing conidial inoculum in vitro. This study was carried out to develop efficient method for conidia production from artificial media. We developed a shaking method which included the following steps: 1) Colony grown on PDA was mashed with a steel spatula; 2) Mycelia fragments were cultured in 50 ml sterilized rain water in a rotary shaker-incubator (180 rpm) at $25^{\circ}C$ for 24 h: 3) The conidia suspension was filtered through two layers of cheesecloth. Average conidia production of all isolates tested using this shaking method was approximately 13.1 times higher than that from Whiteside's method in this study.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.601-608
• /
• 2011

This paper presents the damage assessment of a building structure by using a novel optical fiber accelerometer system. Especially, a sub-scaled building model is designed and manufactured to check up the feasibility of the optical fiber accelerometer for structural health monitoring. The novel accelerometer exploits the moir$\acute{e}$ fringe optical phenomenon and two pairs of optical fibers to measure the displacement with a high accuracy, and furthermore a pendulum to convert the displacement into acceleration. A prototype of optical fiber accelerometer system has been successfully developed that consists of a sensor head, a control unit and a signal processing unit. The building model is also designed as a 4-story building with a rectangular shape of $200{\times}300$ mm of edges. Each floor is connected to the next ones by 6 steel columns which are threaded rods. Basically, a random vibration test of the building model is done with a shaker and all of acceleration data is successfully measured at the assigned points by the optical fiber accelerometer. The experiments are repeated in the undamaged state and the damaged state. The comparison of dynamic parameters including the natural frequencies and the eigenvectors is successfully carried out. Finally, the optical fiber accelerometer is proven to be prospective to evaluate dynamic characteristics of a building structure for the damage assessment.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.479-486
• /
• 2013

In the present work, physicochemical treatments were introduced for de-aggregation and stable dispersion of detonation nanodiamonds (DND) in polar solvents. The DNDs in water exhibited a particle size of 138 nm and high dispersion stability without particular treatment. However, the DNDs in ethanol were severely aggregated to several micrometers in size and showed poor dispersion stability with time. To break down aggregates of DNDs and enhance the dispersion stability of them in ethanol, mechanical force and chemical surfactant were introduced as functions of zirconia ball size, kind of surfactant and amount of surfactant added. From the analyses of average particle size and Turbiscan results, it was suggested that the size of DNDs in ethanol can be reduced by only mechanical force; however, the DNDs were re-aggregated due to high surface activity. The long-term dispersion stability can be achieved by applying mechanical force to break down the aggregates of DNDs and by preventing re-aggregation of them using proper surfactant.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.200-207
• /
• 2001

회전하는 기계에서 전달되는 조화적인 진동력이 수동 및 능동 진동 격리기를 통하여 중간 지지구조물에 어떻게 전달되는 것인가를 연구하였다. 이를 위하여 이론적인 모델은 모든 축에 대하여 수평과 수직방향의 힘과 모멘트를 고려하여 작성되었으며, 실험은 중간 구조물에 전달되는 회전방향 및 직선방향의 진동을 최소화하기 위하여 2단으로 구성된 중간 지지구조물에 부착된 진동 액츄에이터를 사용하였다. 진동원에 의하여 발생된 진동이 에러 센서에서 측정되었으며 제어원과 에러센서사이의 전달함수가 측정되었다. 1-100Hz사이의 주파수 범위에 있어서 기존의 수동격리기와 직렬로 설치된 능동격리기를 통하여 전달된 힘이 실제로 감소되었음을 실험결과를 통하여 확인하였다.

• 자연과학논문집
• /
• 제5권1호
• /
• pp.47-52
• /
• 1992

$\beta$-galactosidase를 강력하게 생산하는 호알칼리성, 고온성 세균 TA-11를 부엽토에서 분리하여 Bacillus sp. TA-11로 동정 하였다. Bacillus sp. TA-11에 의한 $\beta$-galactosidase 생산은 lactose 1.5%, peptone과 yeast ext. 각각 0.4%, $MgSO_4$ 0.2%, $NH_4$CL 0.05% 및 NaCl 0.2% 등을 함유한 배지의 pH를 10.0으로 하여 시험균을 접종한후 $50^{\circ}C$에서 2일간 진탕배양 하였을 때 가장 좋았다.