• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.119-124
• /
• 2007

The most difficult and time-intensive issue in the successful implementation of genetic algorithms is to find good parameter setting, one of the most popular subjects of current research in genetic algorithms. In this study, we present a new efficient experimental design method for parameter optimization in a genetic algorithm for general job shop scheduling problem using the Taguchi method. Four genetic parameters including the population size, the crossover rate, the mutation rate, and the stopping condition are treated as design factors. For the performance characteristic, makespan is adopted. The number of jobs, the number of operations required to be processed in each job, and the number of machines are considered as noise factors in generating various job shop environments. A robust design experiment with inner and outer orthogonal arrays is conducted by computer simulation, and the optimal parameter setting is presented which consists of a combination of the level of each design factor. The validity of the optimal parameter setting is investigated by comparing its SN ratios with those obtained by an experiment with full factorial designs.

• 한국주거학회논문집
• /
• 제11권3호
• /
• pp.75-86
• /
• 2000

This study was conducted to develop standards for evaluating what extent the physical environments of housing which can cope with the needs of the aging society. To set up the evaluation items of housing for the elderly, the evaluation items were formulated after analyzing the items or indices presented by the previous studies. This study was proceeded with in such an order as setting up the scope of evaluation, setting up the areas of evaluation, and setting up the items of evaluation. The scope of evaluation was limited to the indoor spaces of housing as it was thought that the elderly spend much more time at indoors, considering their physical characteristics. The areas of evaluation were composed of seven areas; general matters of housing(14 items), bedroom(35 items), living room(24 items), kitchen(29 items), bathroom(45 items), toilet(40 items), and staircase(15 items). The items of each area included those relevant to general matters, heating and ventilation, light source, openings, and related equipment. Therefore, the items of the evaluation areas were 202 in total.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1242-1247
• /
• 2000

Results from a study on the effect of the chemical agent on the flowing and setting properties of high flowing.high strength concrete using blast-furnace slag are presented in this paper. The flowing and setting properties of concrete are investigated by slump, slump-flow, flowing velocity, L-flow, velocity of V-funnel, L-spatial passability and setting time. In addition, kinds of chemical agent were composed of naphthalene type, of naphthalene and melamine and melamine type. The results indicate that dispersive capacity can be increased by naphthalene composition. Also, it shows that viscosity and early strength can be increased by melamine composition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.805-808
• /
• 2002

This study is designed to reduction of hydration heat of 4 layer division-placed mass concrete considering the difference of setting time of super retarding agent. According to the results, peak temperature of plain concrete by hydration heat show $63^{\circ}C$ around the age of 1 days. Hydration heat is lowest in the bottom layer, and highest in the middle of 3rd layer from the bottom. Hydration heat of mock up structure, which is division-placed at the same interval of 1 and 2 days by setting time difference of super retarding agent, is highest in the bottom layer because after peak temperature of 4th layer, hydration reaction progresses in order of 3rd, 2nd and 1st layer. But in mock up structure which is division-placed at the various interval. peak temperature by hydration heat is reduced by about $13^{\circ}C$, compared with plain concrete because after first peak hydration heat of 4th layer (plain concrete), hydration reaction progresses after the drop of hydration heat in order of 3rd, 2nd and 1st layer.

• Advances in concrete construction
• /
• 제9권3호
• /
• pp.279-287
• /
• 2020

This paper focuses on the engineering properties of Bentonite-Cement-Sodium silicate (BCS) grout, which was prepared by partially replacing the ordinary Portland cement in Cement-Sodium silicate grout with lithium bentonite (Li-bent) and sodium bentonite (Na-bent), respectively. The effect of different Water-to-Solid ratio (W/S) and various replacement percentages of bentonite on the apparent viscosity, bleeding, setting time, and early compressive strength of BCS grout were investigated. The XRD method was used to detect its hydration products. The results showed that both bentonites played a positive role in the stability of BCS grout, increased its apparent viscosity. Na-bent prolonged the setting time of BCS, while 5% of Li-bent shortened the setting time of BCS. The XRD analysis indicated that the hydration products between the mixture containing Na-bent and Li-bent did not differ much. Using bentonite as supplementary cementitious material (SCM) to replace partial cement is a promising way to cut down on carbon dioxide emissions and to produce low-cost, eco-friendly, non-toxic, and water-resistant grout. In addition, Li-bent was superior to Na-bent in improving the strength and the thickening of BCS grouts.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.121-127
• /
• 2012

본 연구에서는 플라이애시를 치환한 시멘트 모르터의 양생온도에 따른 강도증진을 검토하기 위하여 등가재령방법에 의한 강도증진해석을 실시하였다. 플라이애시를 30% 치환한 시멘트모르터의 겉보기활성화에너지를 ASTM C 1074 방법에 의하여 산정한 결과 34.75KJ/mol로 산정되었고, 이를 토대로 Plowman 모델과 Gompertz 모델을 이용하여 해석한 결과 해석치가 측정치를 양호하게 추정함을 알 수 있었고 특히 Gompertz 모델식이 보다 양호한 추정 정밀도를 갖는 것으로 확인되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.128-131
• /
• 2004

This paper is to investigate the mock up test results of mass concrete for transfer girder using setting time difference with super retarding agent(SRA) to reduce hydration heat. According to test results, the temperature history of plain concrete without placing lift had a steep rising curvature, and plain concrete had a big temperature difference between surface and middle section of mass concrete, which may result in occurrence of temperature crack. However, considering placing method B, because setting time of middle section concrete was retarded with an increase in SRA contents, higher hydration heat temperature was observed at surface section concrete compared with that at middle section concrete at early age, which can lower the possibility of hydration heat crack. In case of placing method C, although peak temperature of hydration heat was much lower, at early age, high crack occurrence possibility of the hydration heat attributable to the big temperature difference between middle section and bottom section of concrete was expected at bottom section concrete. Therefore, the structure above the ground like transfer girder is not applicable to consider the placing method C.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.109-116
• /
• 2012

본 연구는 수산화나트륨(NaOH)으로 활성화된 슬래그 모르타르에 석고를 혼합하여 플로우, 응결시간 및 압축강도에 미치는 영향을 알아보고자 하였다. 실험에는 석고를 슬래그 중량에 대해 0~50%까지 혼합하고, 활성화제의 농도는 3M와 6M, 양생온도는 $20{\pm}2^{\circ}C$와 $35{\pm}2^{\circ}C$의 경우에 대해 실시하였다. 플로우와 응결시간시험결과는 석고의 혼합률이 증가할수록 증가하였다. 그러나 압축강도는 일정 혼합률까지 석고의 첨가량이 증가하면 증가하지만 그 이후로는 감소하였다.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.357-364
• /
• 2010

This study was performed to get basic information about properties of high blaine slag cement(HSC) to use shotcrete(or sprayed concrete and mortar). Particle size distribution, setting time and compressive strength test, analysis like as SEM, DSC thermal analysis, XRD was carried out to investigate principle properties of HSC. Setting time of HSC was delayed slightly, but influence of accelerators was more bigger than ordinary portland cement(OPC). Compressive strength of HSC at 28 days was more higher than OPC regardless of using accelerators. Results of analysis showed early period hydration products of HSC is more small and located widely, because of the interface of between cement particle and water is increased as specific surface of cement increase. From the SEM observation and analysis of DSC and XRD results, aluminates accelerators bring on some hydration products like as calcium aluminium hydrates, alkali free accelerators increases ettringite and monosulfates. Aluminates accelerators has a advantage of setting time and early strength, alkali free accelerators increases strength after 7 days.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.96-103
• /
• 2024

The demand for mass calculation of offsite consequence analysis to conduct exhaustive single-unit or multi-unit Level 3 PSA is increasing. In order to perform efficient offsite consequence analyses, the Korea Atomic Energy Research Institute is conducting model optimization studies to minimize the analysis time while maintaining the accuracy of the results. A previous study developed a model optimization method using efficient plume segmentation and verified its effectiveness. In this study, we investigated the possibility of optimizing the model through particle size distribution setting by checking the reduction in analysis time and deviation of the results. Our findings indicate that particle size distribution setting affects the results, but its effect on analysis time is insignificant. Therefore, it is advantageous to set the particle size distribution as fine as possible. Furthermore, we evaluated the effect of multithreading and confirmed its efficiency. Future optimization studies should be conducted on various input factors of offsite consequence analysis, such as spatial grid settings.