• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.37-39
• /
• 2010

In this study, with new office construction site of S Construction company as subject, to solve all the problems according to reduced hydration heat and temperature crack of mass concrete used mat foundation and placing time difference, low heat combination of coarse particle cement and fly-ash and setting time difference applied AE water reducing agent, and to prevent the early frost damage caused by low outdoor temperature, a heat insulation method using double bubble sheet was conducted. As a result, it was found that hydration heat and setting time difference was reduced by applying a low heat combination and setting time difference construction method, and that the high insulation capability of the double bubble sheet was able to not only prevent the early frost damage but also reduce temperature difference between the central part and the upper part of mass concrete.

• 한국해양공학회지
• /
• 제31권6호
• /
• pp.425-430
• /
• 2017

In order to reduce the cost of corrections and time needed for the block assembly process, the reverse setting method is applied for a back-heated block to neutralize deck deformation. The proper reverse setting shape for a back-heated block to correct deformation improved the deck flatness, but an excessive amount of reverse setting could inversely affect the flatness of the block. A prediction method was developed for the proper reverse setting shape using a back-heated block, considering the complex geometry of blocks, thickness of the deck plate, and thermal loading conditions such as welding and back-heating. The prediction method was developed by combining the re-meshing technique and inherent strain-based deformation analysis using the finite element method. Because the flatness deviation was decreased until the lower critical point and thereafter it tended to increase again, the optimum value for which the flatness was the best case was selected by repeatedly calculating the predefined reverse setting values. Based on this analysis and the study of the back-heating deformation of large assembly blocks, including the reverse setting shape, the mechanism for selecting the optimum reverse setting value was identified. The developed method was applied to the actual blocks of a ship, and it was confirmed that the flatness of the block was improved. It is concluded that the developed prediction method can be used to predict the optimum reverse setting shape value of a ship's block, which will reduce the cost of corrections in the construction stage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.715-718
• /
• 2005

The purpose of this paper is to investigate on hydration, setting time and compressive strength properties of cement paste mixed alkali-free accelerator using aluminum sulfate for shotcrete. The experimental focus is to variouse added element with alkali-free accelerator for shotcrete using aluminum sulfate. When diethanolamine was used as a component of alkali-free accelerator, alkali-free accelerator contributed to increasing early hydration, setting time and compressive strength properties of cement paste and mortar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.799-804
• /
• 2003

The purpose of this study was to investigate the effects of re-vibration and curing temperature onto the physical properties of latex-modified concrete with ordinary cement and rapid-setting cement, and thus to provide a guide line of re-vibration and curing conditions for good quality controls. The main experimental variables included two cement types(ordinary portland cement, rapid-setting cement), curing Temperature($10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$), re-vibration methods(continued, intermittent), and re-vibration times(initial setting, one day after mixing). The experimental results showed that the re-vibration affected little to the mechanical properties of LMC and RSLMC, while, the curing temperature a quite some. The early strength development was the highest at $20^{\circ}C$ curing temperature, and decreased at higher temperature. The permeability of concrete generally decreased with curing time. The rapid chloride permeability was a function of time and temperature. The chloride permeability of RSLMC was so small and negligible.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.85-88
• /
• 2005

This study investigates influence on concrete adding beverage or detergent, by work man's mistakes during concrete placement in field. Overall, concrete adding beverage or detergent does not affect slump and air content, compared with control concrete. However concrete adding detergent resulted in significantly higher air content, due to inter facial activation ingredient. For the properties of setting time, concrete adding lactic acid beverage indicated the longest retarding properties, next was coffee and soft drink in order. Compressive strength of concrete, which retarded setting time. exhibited slightly improved value at 7 and 28 days respectively, while that of concrete adding detergent significantly decreased, due to higher air content.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.131-132
• /
• 2021

In this study, as part of the study to reduce and integrate heat of hydration of concrete, the performance change of super retarding agent is examined in the mortar area under high temperature conditions. It was confirmed that the setting time delay can be adjusted from several hours to several days depending on the high temperature and the change of super retarding agent mixing rate. With the increase of super retarding agents, the early age strength was delayed while at 28 days the use of super retarding agent results in an increase of strength remakably.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.625-630
• /
• 2008

In the bone cement composed of dense granules of $\beta-Ca_3(PO_4){_2}(\beta-TCP)$ and $Ca(H_2PO_4){_2}H_2O$, the compressive strength, setting time and temperature rise were measured to observe the degradation of cement with respect to the stored days before setting. Decreases of compressive strength and temperature rise were observed, while setting time increased with respect to the stored days. The similar trends were repeated with the increase of temperature of storage. Such a change virtually meant the fading of the character of cement and it took place only when the two starting materials were mixed during storage. The degradation could be mitigated taking advantage of granular $\beta$-TCP instead of powdery one. The formation of $CaHPO_4$, which resulted from reaction with ambient humidity, was attributed to the degradation observed during storage. Dependence of the degradation behavior on mixing and temperature during storage was discussed in terms of the driving force for reaction of cement.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.571-576
• /
• 2015

Temperature characteristics of supply oil in an ultra-precision hydrostatic table are largely influenced by parameter setting in an oil cooler such as the location of reference sensor and cooling temperature. In this paper, influences of the parameter setting on the temperature variation in the hydrostatic table are experimentally analyzed to suggest the guidelines for practical application. In case of using temperature of inlet oil as a reference sensor in the oil cooler, temperature rise of the supply oil is smaller and thermal settling time is faster than that of using temperature of outlet oil as a reference sensor. The experimental results also show that temperatures of table, rail and return oil can be made almost same, and thermal settling time can be decreased by setting cooling temperature in the oil cooler to be lower than atmospheric temperature.

• 시스템엔지니어링학술지
• /
• 제15권1호
• /
• pp.16-24
• /
• 2019

In this study, an improved method of setting the RAM goals for surveillance system using OMS/MP and field operations data of similar systems is suggested and a case study of surveillance system A is given. Newly suggested methods for setting the RAM goals consist of the procedures such as On/Off time analysis of configuration equipment based on OMS/MP, field operations data analysis of similar systems, adjustment of preventive maintenance time, the number of corrective maintenances, and TALDT in wartime, introducing new subsystem to reliability structure of surveillance system, and reflecting expert's opinion. A case study of surveillance system A shows that newly suggested method in this study for setting the RAM goals is reasonably acceptable and practically applicable to other similar systems.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.295-302
• /
• 2011

초장대교 콘크리트 고주탑 시공시에 사용되고 있는 슬립폼 시스템의 상승속도를 결정하는 요소인 초기경화시간은 콘크리트가 거푸집에서 안전하게 빠져나올 수 있는 굳기를 갖게 되는 콘크리트 타설 후 경화시간으로서, 배합 시 단위시멘트량 및 타설시 여러 현장 환경에 크게 영향을 받으므로, 콘크리트 타설 전에 초기경화시간을 정확히 파악하는 것은 매우 어렵다. 따라서 슬립폼 시스템의 안전성 확보 및 콘크리트면의 유지관리 문제가 발생하지 않도록 초기경화시간 결정을 위한 콘크리트 경화정도를 파악하는 기술이 필요하다. 더구나 슬립폼 공법은 연속적인 시공이 이루어지므로 거푸집 탈형 전 콘크리트의 경화정도를 연속적으로 파악할 수 있어야 한다. 초음파를 이용한 기법은 콘크리트면에 초음파를 투과시켜 투과된 신호를 측정 및 분석하는 방법으로 정량적이며 연속적으로 콘크리트의 경화정도를 파악할 수 있다. 특히 표면파 속도를 이용하는 기법은 표면을 따라 전파하는 표면파의 특성을 이용한 것으로서 표면파 속도의 변화를 통해 콘크리트 경화정도를 알 수 있으며, 주탑과 같이 두께가 두꺼운 콘크리트 구조물에 적용이 적합하다. 따라서 본 논문에서는 표면파 속도를 이용하여 콘크리트의 경화정도를 추정함으로서 슬립폼 시스템의 상승속도를 결정하는 연구를 수행하였다. 먼저 슬립폼 시스템 상승속도와 초기경화시간과의 관계식을 유도하였으며, 표면파 진행문제의 수치해석 결과를 연속웨이블릿변환 하여 표면파 속도를 추정하였다. 이때 탄성파 발생위치와 두 개의 수신점 거리에 따른 추정된 표면파 속도의 정밀도를 조사하였으며, 추정된 표면파 속도와 탄성계수와의 관계를 조사하였다.