• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제14권6호
• /
• pp.77-90
• /
• 2015

An increasing number of vehicles is causing various traffic problems such as chronic congestion of highways and air pollution. Local governments have been managing traffic by constructing systems such as Intelligent Transport Systems (ITS) and Advanced Traffic Management Systems (ATMS) to relieve such problems, but construction of an infrastructure-based traffic system is insufficient in resolving chronic traffic problems. A more sophisticated system with enhanced operational management capabilities added to the existing facilities is necessary at this point. As traffic patterns of the urban traffic flow is time-specific due to the different vehicle populations throughout the time of the day, a local network-wide signal operation plan that can manage such situation-specific traffic patterns is deemed to be necessary. Therefore, this study is conducted for the purpose of establishment of a plan for contextual signal control management through signal optimization at the network level after setting the Frame Signal in accordance to the traffic patterns gathered from the short-term traffic forecast data as a means to mitigate the problems with existing standardized signal operations.

• Imaging Science in Dentistry
• /
• 제43권1호
• /
• pp.7-15
• /
• 2013

Purpose: This study was performed to suggest reference line-pair values of panoramic images with clinically desirable qualities using an arch-form phantom stand. Materials and Methods: The line-pair test phantom was chosen. A real skull model was selected for setting the arch-form model of the phantom stand. The phantom stand had slits in four regions (incisor, premolar, molar, TMJ). Four raw images of the test phantom in each region and one raw image of the real skull were converted into 50 test phantom images and 50 skull phantom images with various line-pair values. 50 post-processed real skull phantom images were divided into 4 groups and were randomly submitted to 14 evaluators. Image quality was graded on a 4 point scale (1. good, 2. normal, 3. poor but interpretable, and 4. not interpretable). The reference line pair was determined as the first line-pair value scored less than 2 points. Result: The mean scores tended to decrease as the line-pair values increased. The reference line-pair values were 3.19 LP/mm in the incisor, 2.32 LP/mm in the premolar and TMJ, and 1.88 LP/mm in the molar region. Conclusion: Image quality evaluation methods and criteria should be able to assess various regions considering the characteristics of panoramic systems. This study suggested overall and regional reference line-pair values and established a set of standard values for them.

• Child Health Nursing Research
• /
• 제7권1호
• /
• pp.85-95
• /
• 2001

The purpose of this study was to reveal what influences the divergent methodological researches have brought the nursing practice in during the past 3 decades. The nursing record sheets ie, the nursing discourses were analyzed to know the knowledges that were recorded, accepted and communicated in nursing practice at pediatric intensive care units, and unclosed the philosophical and methodological position of that knowledges. The texts were 13 sheets, 3 kinds of nursing record(7 24hours flow charts, 4 nursing information record sheets and 2 transfer record sheets) used at 4 hospitals. The unit of analysis was 'word'. First, all words of the sheets were listed up, clustered into categories based on their contents. And then, the larger conceptual themes were drawn to elucidate the effect of the knowledge/power and the philosophical and methodological position of that knowledges. To enhanced the validity of the analysis, the data were analyzed by two researchers. The 'words' were classified into 3 categories; 'general information', 'assessment' and 'inter-vention'. The conceptual themes of the texts were 'the gaze for quantification and objectification' and 'technical/assimilated caring'. This themes reflected the logic positivistic and biomedical view that had dominated at clinical practice. Nursing has endeavored to resist the logic-positivistic knowledge/power and to established the nursing knowledge/power based on multiple philosophies and methodologies, especially phenomenological-interpretative. But the results of this study revealed that such efforts in nursing theory and research couldn't influenced the knowledge of practice. Logic positivism was yet so strong and the biomedical model yet dominated in the clinical practice. It identified that the borrowed theory and the knowledge from the received view gave nursing the power. But they were modalities that reinforced the dominant, medical power. Nursing has investigate the other positions (feminism, Habermas' critical social theory and Foucault's discourse theory). This positions suggest different assumptions but share the common concepts; equality, emancipation and freedom. The important point is how make these concepts the practical for nursing knowledge/power in practice. We must recognize that the praxis at clinical setting take place at the field unlike theoretical praxis. The change of clinical practice is the social, economic and political change.

• Physical Therapy Korea
• /
• 제9권2호
• /
• pp.61-81
• /
• 2002

The purposes of this research were to investigate home care rehabilitation services in rural areas and to collect basic data about disabled persons necessary when for carrying out rehabilitation services. Respondents were selected from six of a total of eight townships (Myon) and one town (Eup) in the Wonju city area. Wonju is in Kangwon Province (Do). Of a total of 338 names provided by the Myon offices, 298 persons were located and included registered and non-registered persons. Conditions included stroke, spinal cord injury, and cerebral palsy in addition to disabilities classified as first, second or third degree, in the case of registered cases. Respondent demographic characteristics, medical characteristics, rehabilitation service needs, willingness to receive rehabilitation service and individual opinions regarding rehabilitation services were analysed by frequency and percentage. The results were as follows: 1) Rehabilitation services received by disabled persons living at home in the rural areas surrounding Wonju city were medical rehabilitation (41.7%), diagnosis (36.5%), rehabilitation assistive devices (7.6%), social assistance (7.1%), rehabilitation counseling (3.0%), vocational rehabilitation (1.8%), educational rehabilitation (1.6%) and housekeeping services (0.5%). The majority of rehabilitation services were medical rehabilitation provided at hospitals and oriental medicine hospitals. 2) Sixty point eight percent of respondents expressed their willingness to receive home care rehabilitation services. Needs expressed were highest for medical rehabilitation (27.0%), followed by social assistance (19.4%), medical examination (12.4%), physician-generated diagnosis in the home setting (11.6%), sociopsychological rehabilitation (9.3%), vocational rehabilitation (7.6%), rehabilitation engineering (6.0%), educational rehabilitation (3.3%), and housekeeping services (3.3%). 3) Rehabilitation service needs were analyzed by severity classification: 65.8% of first degree, 62.7% of second degree and 55.6% of third degree disability classification, and 62.7% of non-registered disabled individuals responded that rehabilitation service was necessary. 4) Rehabilitation service needs were also analyzed by diagnosis: 62.6% of stroke, 85.5% of amputation, 60.0% of spinal cord injury and 52.4% of traumatic brain injury respondents answered positively that they were willing to receive rehabilitation service if it were to be provided. Rehabilitation service utilization data of disabled individuals living at home in rural areas were investigated and their rehabilitation needs analyzed. This critical information can be used when community-based rehabilitation programs for disabled persons living at home are planned for provision out of a public health center or when community-based rehabilitation welfare policy is formulated.

• Journal of the Korean Society of Safety
• /
• 제25권6호
• /
• pp.34-39
• /
• 2010

The purpose of this study is to suggest objective evaluation model as a plan to utilize as opportunity in establishing judgment standard of mutual inspection criteria and to upgrade inspection ability by reviewing and analyzing level of danger and importance in advance based on inspection results of inspection institutions regarding tower cranes used in construction fields. Tower crane is a mechanical device transporting construction supplies and heavy materials to places over 20~150M high from the ground for the period ranging from a short time of 2~3 months to two years after being installed in construction sites in vicinity of buildings or structures and is an important facility indispensable for construction sites. However, since use period after installation is short and professional technical ability of technicians working on-site about of tower crane is poor, systematic and quantitative safety management is not carried out As a part of researches on procedure of RBI(Risk Based Inspection) possible to apply to Knowledge Based System based on knowledge and experiences of experts as well as to tower cranes for solving these problems, quantitative RPN(Risk Priority Number) was applied to RPN utilizing technique of FMEA(Failure Mode and Effect Analyses). When general RBI 80/20 Rule was applied parts with high level of risks were found out as wire rope, hoist up/down safety device, reduction gear, and etc. However, since there are still many insufficient parts as risk analyses of tower crane were not established, it is necessary for experts with sufficient experiences and knowledge to supplement active RBI techniques and continuous researches on tower cranes by sharing and setting up data base of important information with this study as a starting point.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.254-257
• /
• 2013

A Meta-analysis is a statistical literature synthesis method that provides the opportunity to view the research context by combining and analyzing the quantitative results of many empirical studies. The Technology Acceptance Model (TAM) has been the subjects of a great deal fields and now also has been continuously studied. Recently, the issue of the biggest the information communication and information systems fields is smart. At this point, we conducted a Meta-analysis and review of external constructs based on the technology acceptance model. This study was targeted a total of 106 research papers that are setting up the causal relationship in the technology acceptance model among the research papers published in domestic academic journals before 2013. The result of the Meta-analysis, the biggest effect size the path from external Variables to perceived usefulness was showed playfulness. The effect size was 0.536 in the path from perceived usefulness to playfulness. And, the biggest effect size the path from external Variables to perceived ease of use was showed self efficacy. The effect size was 0.536 in the path from perceived ease of use to self efficacy. Based on the results, it was discussed the difference through comparative analysis with previous research.

• Fire Science and Engineering
• /
• 제34권3호
• /
• pp.67-75
• /
• 2020

In this study, the risk of heat generation due to normal and overload currents that vary with the abnormal loosening angle of wire-connecting bolts were identified. The risks were analyzed based on the thermal characteristics to minimize the carbonization accidents of terminal blocks inside distribution panels typically used in industrial sites. We applied a method for measuring the heating temperature and temperature variations in the terminal blocks in real-time by installing a resistance temperature detector sensor board in the terminal block. The experimental results showed that the terminal block model with a low-rated current exhibited a higher heating temperature, thus, confirming the need to select the terminal block capacity based on load currents. Additionally, the higher the rated current of the terminal block with a high-rated current and the higher the degree of loosening, the faster the carbonization point. Such heating temperature monitoring enabled real-time thermal temperature measurement and a step-by-step risk level setting through thermal analysis. The results of the measurement and analysis of carbonization risks can provide a theoretical basis for further research regarding the risk of fire due to carbonization. Furthermore, the deterioration measurement method using the temperature sensor board developed in this study is widely applicable to prevent fires caused by poor electrical contact as well as risk-level management.

• Korean Journal of Construction Engineering and Management
• /
• 제15권3호
• /
• pp.23-30
• /
• 2014

Overseas construction orders of domestic companies had been increased significantly in a short period from $10.9 billion in 2005 to $64.9 billion in 2012. However experts are concerned that quality of growth will not support quantitative growth. This study suggest concentrate competencies for not only winning in bid but also successful execution of domestic companies. 4 Steps which are Pre-Marketing, Bid-Preparation, Bidding, Contract Phase are defined for competency assessment. After drawing specific tasks by phase, survey asking importance and capability of the tasks to the person in charge of bidding and site was conducted by utilizing Likert 7 point scale. According to the result of IPA analysis, domestic construction companies need to ensure internal competencies; Project risk review, Bid team organization, and external competencies; Client needs grasp, Localization strategy, Cooperation establishment. Hearafter domestic construction companies will be able to utilize the result of the study for setting bidding strategy for winning in bid and improving earning rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제12권3호
• /
• pp.210-218
• /
• 2002

This paper proposes an efficient separation method of the composite images by using independent component analysis(ICA) based on neural networks of the approximate learning algorithm. The Proposed learning algorithm is the fixed point(FP) algorithm based on Secant method which can be approximately computed by only the values of function for estimating the root of objective function for optimizing entropy. The secant method is an alternative of the Newton method which is essential to differentiate the function for estimating the root. It can achieve a superior property of the FP algorithm for ICA due to simplify the composite computation of differential process. The proposed algorithm has been applied to the composite signals and image generated by random mixing matrix in the 4 signal of 500-sample and the 10 images of $512{\times}512-pixel$, respectively The simulation results show that the proposed algorithm has better performance of the learning speed and the separation than those using the conventional algorithm based method. It also solved the training performances depending on initial points setting and the nonrealistic learning time for separating the large size image by using the conventional algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제13권10호
• /
• pp.2004-2010
• /
• 2009

The characteristic of the backbond for distribution service in WMNs(Wireless Mesh Networks) is that WMNs has multiple links connected to mesh points and dynamic routing protocol such as AODV to establish routing paths. When the terminal is communicating with the service through new AP, mobile nodes can resume communication by setting only the link between new AP and mobile node in the case of existing WLANs, but WMNs needs path establishment process in multihop networks. Our goal in this paper is to support the seamless communication service by eliminating path establishment delay in WMNs. We present the method that eliminates the handover latency by predicting the location of handover using GPS information and making the paths to their destination in advance. We implement mesh nodes using embedded board that contains proposed handover method and evaluate performance of handover latency. Our experiment shows that handover delay time is decreased from 2.47 to 0.05 seconds and data loss rate is decreased from 20~35% in the existing method to 0~10% level.