• The Journal of Korean Physical Therapy
• /
• 제27권5호
• /
• pp.315-319
• /
• 2015

Purpose: The purpose of this study was to investigate the effect of leg-crossing positions on muscle activities of rectus femoris, tensor fascia latae, and hamstring in healthy 20's adults. Methods: Twenty healthy subjects were asked to perform three leg-crossing positions, leg crossing (LC), tailor crossing (TC), and ankle crossing (AC). Surface electromyography (EMG) was used to evaluate the activities of rectus femoris, tensor fascia latae, and hamstring during upright sit posture (UP) and three leg-crossing positions and UP was compared to three leg-crossing positions. Repeated one way ANOVA was used for data analysis. The alpha level was set at 0.05. Results: The results showed significant difference in the muscle activities of rectus femoris, tensor fascia latae, and hamstring among leg-crossing positions. The muscle activity of the rectus femoris was significantly lower in LC and TC positions than UP. The muscle activity of tensor fascia latae was significantly higher in LC position than UP and other leg-crossing positions. The muscle activity of hamstring was significantly higher in LC and TC positions and significantly lower in AC position than in UP. Conclusion: Our study suggests that the activity of hip muscles was affected by pelvic and knee alignment in various leg-crossing positions.

• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.117-125
• /
• 2016

The organization which is does sale activity in 21c, face a radical environment changes and high competition. To overcome from these situation, employee who is does sale in field are important to set sustainablity to the organization. A sales person is one of member in organizations, so they have a relation with other employee in process of job. To increase there performance and satisfaction, LMX is focused by many researchers. LMX can increase job satisfaction which can increase job performance thought organizational justice. And career of employee can has moderate effect between LMX and organizational justice. To figure out casual relationship among factors, researcher conduct a empirical analysis use 210 samples from SME saleman. Result of empirical study show us every hypothesis which researcher set up has supported. Based on this result, reseacher provide manageric implications and conclusions.

• 한국작물학회지
• /
• 제48권
• /
• pp.65-71
• /
• 2003

Sesame seed are one of the oldest oil-bearing crops known to man. Not only are they nutritious, they are physicologically beneficial. Because of these properties, the promotion of sesame as a crop is set to increase from now on. The lignan component of sesame, which has an antioxidative function, varies considerably. In addition, the seeds remain viable for longer than other crops. At low temperature, it has been reported that the seed remain viable for up to thirty years. This is due to the lignan content of the seeds. In the last twenty years, the mysteries of the natural chemistry of sesame seeds have been unravelled one by one. Up to now, the lignan component has been found to have an $\alpha$-tocopherol synergist effect, an anti-aging effect, a cancer suppressing effect, a hypertension reduction effect, an effect on the promotion of liver function, an effect on the control of the ration of unsaturated fat, and an effect on the synthesis of unsaturated fatty acids. The lignan component of sesame does not simply have an anti-oxidant function, but has diverse recently discovered physiological uses which make the study of lignan highly rewarding.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.272-280
• /
• 2014

Most of the car navigation systems pzrovide 2D or 3D virtual map-based driving guidance. One of the important issues is how to reduce cognitive burden to the driver who should interpret the abstracted information to real world driving information. Recently, an augmented reality (AR)-based navigation is considered as a new way to reduce cognitive workload by superimposing guidance information into the real world scene captured by the camera. In particular, head-up display (HUD) is popular to implement AR navigation. However, HUD is too expensive to be set up in most cars so that the HUD-based AR navigation is currently unrealistic for navigational assistance. Meanwhile, smartphones with advanced computing capability and various sensors are popularized and also provide navigational assistance. This paper presents a research on cognitive effect and responsiveness of an AR navigation by a comparative study with a conventional virtual map-based navigation on the same smartphone. This paper experimented both quantitative and qualitative studies to compare cognitive workload and responsiveness, respectively. The number of eye gazing at the navigation system is used to measure the cognitive effect. In addition, questionnaires are used for qualitative analysis of the responsiveness.

• Ocean and Polar Research
• /
• 제40권2호
• /
• pp.87-98
• /
• 2018

It is widely known that infragravity waves can exert significant influence on wave run-up over beaches. Large run-ups can lead to overwash, flooding and severe coastal erosion. In spite of the importance of infragravity waves in relation to wave run-up and coastal erosion, few studies have been carried out with regard to the impact of infragravity waves on nearshore morphodynamics with respect to eastern beaches in Korea. The purpose of this study is to investigate the importance of infragravity waves in nearshore numerical modelling. For the study, XBeach model was set up to analyze morphodynamics in December 2016, in Ilsan beach which is located in Ilsan-dong, Ulsan Metropolitan City. After validation of the XBeach model, numerical experiments were conducted by using various directional spreading coefficients. As the directional spreading coefficients are increased, the effect of infragravity waves is also enhanced by narrowband frequency. With the increasing effect of infragravity waves, the amount of sediment transport is also increased and an erosion dominant pattern is found in the south part of Ilsan beach and a deposition pattern in the north part of the beach mainly due to the wave incident direction of NNE.

• 한국건설관리학회논문집
• /
• 제7권3호
• /
• pp.45-55
• /
• 2006

본 연구는 건설경영자의 경영Mind정립과 합리적 의사결정에 필요한 사고체계 구축에 필요한 논리와 기업경영에서 돌출될 수 있는 외부적 간섭인자를 효과적으로 분석할 수 있는 방향을 제시하는 것이 목적이다. 따라서 경영Mind 정립에 적용되는 간섭인자들이 경영 의사결정에 많은 영향을 주기 때문에 Mind정립과 경영환경에 대한 합리적 접근방법을 제시하고, 시간의 동태성에 따른 환경 요인들을 경영학, 심리학, 철학적 개념에서 논리적 단계로 분석했다. 끝으로 의사결정 요소에 대한 원칙적 한계 및 접근단계와 평가기준을 정립해보았다. 본 연구를 수행한 결과를 다음과 같이 요약해 본다. (1) 경영자의 의사결정 접근방법 (3) 시간의 동태성과 경영Mind (3) 의사결정의 외부 환경적 요인 (4) 경영Mind의 Synergy화 방법 (5) Mind 정립의 기대효과.

• 한국전문물리치료학회지
• /
• 제21권1호
• /
• pp.63-69
• /
• 2014

Cross knee curl-up is an ideal variation of abdominal curl up exercise to strengthen abdominal musculature without excessive lumbar flexion which can increase the loads on the disc and ligaments. In addition, slowly forced expiration can facilitate the activation of the abdominal musculature. The purpose of this study was to determine the effects of slowly forced expiration on activity of abdominal muscles, such as rectus abdominis (RA), external oblique (EO), and transverse abdominis/internal oblique (TrA/IO), while cross knee curl-up. Eleven young and healthy subjects (6 males and 5 females) participated. All subjects performed the cross knee curl-up slowly forced expiration and natural breathing. Paired t-test was performed in normalized electromyogram (EMG) muscle activity of the bilateral RA, EO, and TrA/IO to compare the differences between the cross curl-up with slowly forced expiration and natural breathing. Statistical significance was set at .05. There were no significant differences in normalized EMG muscle activity of the bilateral RA, EO, and TrA/IO between the cross curl-up with slowly forced expiration and natural breathing. The finding of this study designates that slowly forced expiration does not induce increasing activity of abdominal muscle in cross knee curl-up; hence, learning step of breathing control might not be necessary to strengthen abdominal muscle in cross knee curl-up.

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.444-449
• /
• 2021

Objective: The purpose of this study is to observe the change in the thickness of abdominal muscles when electrical muscle stimulation (EMS) is applied to the abdomen during rest and abdominal muscle exercise to investigate the effect of EMS applied to the abdomen on the superficial and deep muscles thickness. Design: Cross sectional design. Methods: Twenty healthy subjects participated in this study. Subjects were performed resting position, resting position with EMS, curl-up and curl-up with EMS. The electrode of the EMS belt is attached to the abdominal wall between the 12th rib and iliac crest. The thickness of abdominal muscles including rectus abdominis (RA), external oblique (EO), internal oblique (IO), and transverse abdominis (TrA) were captured in each position by ultrasound image during expiration. All subjects were performed four positions randomly. Data were analyzed using repeated ANOVA with the level of significance set at 𝛼=0.05. Results: The muscle thickness of RA, EO, IO and TrA were significantly different at each position (p<0.05). The thickness of all abdominal muscles increased significantly when curl-up than curl-up with EMS. Both RA and EO thickness were significantly increased at resting position than resting position and EMS were combined(p<0.05). But IO and TrA thickness were decreased at resting position when EMS were combined. Conclusions: The results suggest that EMS activates superficial abdominal muscles RA and EO. Therefore, abdominal strengthening exercise combined EMS can activate abdominal muscles and can be applied to various patients and rehabilitation in clinical practice.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.789-798
• /
• 2020

The effect of Chitosan (CS), Carbon Nanotube (CNT) and hybrid (CS-CNT) fillers on the natural frequency of drilled composite plate is investigated by experimentally in this study. The numerical validation is also made with a program based on Finite Element Method (SolidWorks). Nine types filled and one neat composite plates are used in the study. The fillers ratios are 1% CS, 2% CS, 3% CS, 0.1% CNT, 0.2% CNT, 0.3% CNT, 1% CS+0.3% CNT, 2% CS+0.3% CNT, 3% CS+0.3% CNT. The specimens cut to certain sizes by water jet from the plates 400 mm × 400 mm in dimensions. Some of them are drilled in certain dimensions with drill. The natural frequency of each specimen is measured by the vibration test set up to determine the vibration characteristic. The vibration test set up includes an accelerometer, a current source power unit, a data acquisition card and a computer. A code is written in Matlab^® program for the signal processing. The study are investigated and discussed in four main points to understand the effect of the fillers on the natural frequency of the composite plate. These are the effect of fillers contents and amounts, orientation angles of fibers, holes numbers and holes sizes. As results, the natural frequency of the plate with 1% CS and 0.1% CNT hybrid filler is lower than those of the plates with other fillers ratios for 45° orientation angle. Besides, in the composite plate with 0° orientation angle, the natural frequency increases with increasing the filler ratio. Moreover, the natural frequency increases until a certain hole number and then it decreases. Furthermore, the natural frequency is not affected until a certain hole diameter but then it decreases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.209-214
• /
• 1995

This paper describes that the effects of punch speed and temperatures of the die and the blank holder on the drawability are examined. Up to now, multi-stage of dies sets have been used generally at room temperature in deep drawing of rectangular shaped components. But using local heating, it is shown that one stage of die set was capable of deep drawing and the drawability was increased and sheet thickness of component was drawn somewhat uniformly. Rectangular deep drawing experiments on two kinds of stainless steel STS316L, STS430 of 1.0 mm thickness have been conducted using local heating. The limiting drawing height can be increased by heating the die and the blank holder up to 100 .deg. C at STS316L. Commercial lubricants hadn't an effect on drawability in rectangular deep drawing, but vinyl and teflon film had an effect on it.