• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.873-876
• /
• 1993

A scheme of IEVSC(Integral Error Variable Structure Controller) is proposed for the DC servo systems with the disturbances which does not satisfy the matching condition. The structure of IEVSC is composed of state observer, VSC, and servo compensator which is designed for the output variable enhances the robustness against all type of disturbances. The performances of proposed IEVSC are verified through simulations for the DC servo motor.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.380-383
• /
• 2003

This paper proposes a new and simple input prediction method for robust servo system. This servo system uses robust tracking control system based on both Coprime Factorization(CF) and Zero Phase Error Tracking control system. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness and disturbance rejection ability The optical disk tracking servo system can detect only the tracking error. So the new and simple input prediction system proposed in this paper estimates the reference input signal from the tracking error. Numerical simulation results show that the proposed method is effective.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.693-696
• /
• 2003

Among many servo control systems in steel making plant, AGC system in hot rolling mill is very important to get a accurate strip thickness for good quality. AGC (Auto Gauge Control) system controls the roll gap to maintain the required thickness by using the variation of roll force and the measure of output thickness. In this paper, a simulator of AGC system which unifies both hydraulic servo control system and AGC algorithm is suggested. After proving the concurrence of algorithms between the simulator and real system, main actuator system is added. Instead of usual PI system used in present system, DOB control scheme is applied and shows the effect of disturbance attenuation well.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.61-70
• /
• 2017

In this study, an extended-state-observer (ESO) based non-linear servo control is introduced for an electro-hydrostatic actuator (EHA). Almost hydraulic systems not only are highly non-linear system that has mismatched uncertainties and external disturbances, but also can not measure some states. ESO that only use an output signal can be used to compensate these uncertainties and estimate unmeasurable states. To improve the position tracking performance, the barrier Lyapunov function (BLF) that can guarantee an output tolerance is introduced for the position tracking error signal of back stepping control procedures. Finally, the proposed servo control is compared with the proportional-integral (PI) control.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.5
• /
• pp.209-215
• /
• 2023

This study proposes an AC servo motor control program structure and its implementation method to efficiently integrate 13 types of additional compensation algorithms into the basic FOC (field-oriented control) algorithm program. Various compensation algorithms are necessary to enhance the stability and performance of machine tools by compensating for interference from disturbances and vibrations. Each compensation algorithm is implemented as a separate, independent function and called from a switch-case statement in the ISR (interrupt service routine) of the PWM (pulse-width modulation) device. The advantages of this approach include facilitating not only debugging and testing but also reducing the possibility of errors during the program development phase. Thus, it is easy to add and activate each specific compensation algorithm for the program update during the program operation phase. The implemented motor control program was experimented with a single-axis feed shaft testbed driven by a commercial AC servo motor control drive board and a 750 Watts SPMSM (surface-mounted permanent magnet synchronous motor), and the results verified its normal operation and performance improvement.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.477-482
• /
• 2001

To realize higher track density of HDD, the servo bandwidth should be higher, however, is limited by the mechanical resonances of the arm, coil of the VCM and ball bearing pivot. The dual-stage actuator systems have been suggested as a possible solution. For the dual-stage actuator systems based on the suspension, the suspension resonance frequencies in the radial access direction are important factors to increase a servo bandwidth, however the improvement of these frequencies may affect the shock resistance performance and spring constant. The slider's flying stability can be deteriorated by the change of a vertical stiffness. In this work, we have investigated a suspension design scheme possessing a milliactuator for dual-stage actuator systems and also achieved higher mechanical characteristics. Design parameters are deduced by finite element analysis with sensitivity function. It is confirmed that the proposed suspension with the milliactuator has the capability of fine tracking motion, due to its hinge structure on the spring region, and achieves higher mechanical resonance frequencies in the radial access direction with a high-shock resistance and a low-spring constant.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.20-23
• /
• 1996

This paper deals with the flexible manipulator with rotational and translational degrees of freedom, which has an arm of time-varying length with the prismatic joint. The tracking control problem of the flexible manipulator is considered. First we design the controller of the 2-type robust servo system based on the finite horizon optimal control theory for the trajectory planned as a discontinuous velocity. Next, to reduce the tracking error, we use the method of the dynamic programming and of modifying the reference trajectory in time coordinate. The simulation results show that the dynamic modeling is adequate and that the asymptotic stabilization of the flexible manipulator is preserved in spite of nonlinear terms. The PTP control error has been reduced to zero completely, and the trajectory tracking errors are reduced sufficiently by the proposed control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1897-1900
• /
• 2004

In recent years, a lot of industrial equipments have serial communication channel such as FieldBus (CAN, Profibus, etc.) or Ethernet that provides real time communication between industrial equipments. Theses applications include gantry crane, robot, chip mounter, etc.. In this paper, we discuss the synchronization technique for networked multi-motor systems where controllers (commercial servo amps) are distributed and interconnected by CAN (Controller Area Networks). We first describe the equivalent model for the individual servo-amp and motor using the frequency response. We design the $H{\infty}$ controller for motion synchronization. Finally, the synchronization technique using the equivalent model and the $H{\infty}$ controller is verified by the simulation and the experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.246-252
• /
• 1999

In this paper, the frequency response characteristics of the velocity controlled EHS system obtained by linear simulation method, nonlinear simulation method, and experimentation are compared one another, in order to verify propriety of the linearization method in case of analysis of hydraulic systems. The Bode diagrams are obtained by transforming time domain data of experimental results and nonlinear simulated ones with Fourier transform. The results of nonlinear simulation are more similar to the frequency response of the real systems than those of linear simulation. It is found that nonlinearity of hydraulic systems is mainly occurred from servo valve, and nonlinearity is increased as displacement of servo valve spool increases.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.367-371
• /
• 1989

As a menas of designing a robust servo system for electrical motor drive system, an iterative learning control method is proposed by employing the structure of the model algorithmic control. A sufficient condition for the convergency is shown, and via simulation for permanent magnet synchronous motor drive system, it is demonstrated 1hat the method yields a 'good performance even in the presence of the external load distrurbances.