• 한국멀티미디어학회논문지
• /
• 제23권10호
• /
• pp.1258-1269
• /
• 2020

The IoT(Internet of Things) service provides users with valuable services by collecting and analyzing data using Internet-connected IoT devices. Currently, IoT service platforms are accomplished by using edge computing to reduce the delay time required to collect data from IoT devices. However, if a user moves to another network with IoT device, the connection will be lost and IoT service will be suspended. To solve this problem, we proposes a service that automatically roaming IoT service when IoT device makes move. IoT roaming service provides a device automatic tracking management technique designed to continue receiving IoT services even if users move to other networks. To check if the proposed roaming service was effective, we implemented IoT roaming service and measured the data transfer time while move between networks along with devices while using IoT service. As a result, the average data transfer time was 124.62ms, and the average service interrupt time was 812.12ms. with this result, we can assume that the user could feel service interruption time very shortly and it will not affect the service experience. with IoT roaming service, we expect that it will present a method that stably providing IoT services even if user moves networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2783-2804
• /
• 2021

In the network function virtualization environment, dynamic changes in network traffic will lead to the dynamic changes of service function chain resource demand, which entails timely dynamic adjustment of service function chain resource configuration. At present, most researches solve this problem through virtual network function migration and link rerouting, and there exist some problems such as long service interruption time, excessive network operation cost and high penalty. This paper proposes a dynamic adjustment method of service function chain resource configuration for the dynamic changes of network traffic. First, a dynamic adjustment request of service function chain is generated according to the prediction of network traffic. Second, a dynamic adjustment strategy of service function chain resource configuration is determined according to substrate network resources. Finally, the resource configuration of a service function chain is pre-adjusted according to the dynamic adjustment strategy. Virtual network functions combination and virtual machine reusing are fully considered in this process. The experimental results show that this method can reduce the influence of service function chain resource configuration dynamic adjustment on quality of service, reduce network operation cost and improve the revenue of service providers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.316-318
• /
• 2001

Occasionally, equipment in a distribution system fails due to damage from weather, vandalism, or other causes. In addition, it is recommended practice to have some way in which maintenance or replacement of every element in a system can be performed without causing lengthy interruption of electrical service to the customers it feeds. Thus, alternate sources, paths, and configurations of service must be planned so that both failures and maintenance do not affect customer service beyond a reasonable amount. In some cases, planning for alternate routes of service during equipment outages or emergencies -- will be the major aspect influencing selection of a feeder's capacity, type of route, or layout. We want to know the relationship between molt-dividing multi-connection and distribution reliability for contingency support considerations.

• 정보처리학회논문지C
• /
• 제19C권2호
• /
• pp.153-166
• /
• 2012

모바일 네트워크에서 멀티캐스트서비스의 이용량 증가로 MN(이동단말)에게 끊김없이 멀티캐스트 서비스를 전송하는 통신이 중요한 통신 형태가 요구될 것이다. 본 논문에서 IETF에서 표준화가 진행중인 PMIPv6(Proxy Mobile IPv6)에서 MLS(Multicast Listener Support)에 대한 현재의 문제점을 지적하고, 네트워크 기반의 이동성관리 기법인 PMIPv6 네트워크에서 도메인간 고속 멀티캐스트 핸드오버 절차를 제안한다. 제안된 도메인간 고속 멀티캐스트 핸드오버 절차에서는 MN의 컨텍스트를 사용하여 멀티캐스트 관리를 최적화한다. 제안된 고속 멀티캐스트 핸드오버 절차를 기본적인 것과 해석 모델링을 통하여 비교분석하고, 도메인간 핸드오버의 경우에 제안된 도메인간 고속 멀티캐스트 핸드오버 절차가 기본적인 것과 비교하여 서비스 단절 시간과 전체 네트워크 오버해드가 상당히 감소한다는 것을 보여준다.

• 한국수자원학회논문집
• /
• 제40권9호
• /
• pp.735-742
• /
• 2007

본 연구에서는 실제 대형 상수관망에서 보다 효율적이면서도 정확한 신뢰도를 추정할 수 있는 segment를 기반으로 한 minimum cutset 방법을 제안하였다. 기존의 상수관망에서 minimum outset을 기반으로 한 모형은 상수관을 minimum outset의 최소단위로 다루어 상수관 파괴에 따른 피해영역을 과소산정할 수 있는 문제점을 가지고 있다. 그러나 제안된 신뢰도 추정 모형은 기존 신뢰도 추정 모형과 달리, 상수관 파괴에 따른 피해영역을 현실적으로 추정하기 위하여 segment와 unintended isolation, 그리고 수리학적 피해인 압력저하영역을 도입하였다. 또한 minimum cutset 방법에서 정의될 수 있는 minimum cutset을 상수관망 내 일부 절점의 비정상 상태를 야기하는 segment 1개로 정의하였으며 정의된 minimum outset의 동시파괴조합의 확률을 고려하기 위하여 success mode approach를 적용하였다. 제안된 모형은 제수밸브의 위치와 수를 고려하여 상수관 파괴에 따른 피해영역을 추정하며, 실제 대형 상수관망인 Chester Water Authority에 적용한 결과, 기존 신뢰도 추정 모형과 비교할 때 보다 실제적인 피해영역의 추정과 이에 따른 신뢰도의 추정이 가능하였다.

• 한국컴퓨터정보학회논문지
• /
• 제10권6호
• /
• pp.261-268
• /
• 2005

최근 IPv6에서 이동 통신에 끊김 없는 서비스를 제공하기 위해 Mobile IPv6에 관한 많은 연구가 이루어지고 있다. FMIPv6는 핸드오버 절차를 간소화시켜서 빠른 속도의 핸드오버와 데이터 전송이 가능하며 SIP나 VoIP 및 무선 인터넷 동영상 서비스와 같은 경우에 많이 사용될 것으로 예상된다. 그러나, 고속 이동시 랜드오버로 인한 패킷 손실이 심각한 문제로 대두되고 있다. 따라서 본 논문에서는 FMIPv6에서 핸드오버시 발생하는 패킷 손실을 줄이기 위하여 라우터에서 사용하는 여러 패킷 관리 스케쥴링 기법 중 WGQ기법을 사용하여 트래픽 관리 메커니즘을 설계하고 평가하였다.

• International Journal of Contents
• /
• 제1권1호
• /
• pp.45-49
• /
• 2005

If the service provider provides mobile service with mobile switching centers that use different handoff message format, the soft-handoff between mobile switching centers is not available and the hard-handoff scheme is used instead. When this occurs, calls are often disconnected or there is an interruption of service. This can be very annoying to a mobile user. We propose the handoff subsystem of the ATM switch which provides the soft-handoff between wireless cells under the control of different MSCs. The proposed handoff subsystem transforms the handoff message format of the source MSC to that of the destination MSC. It also provides efficient routing scheme that distributes handoff packets to balance the traffic load.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.279-285
• /
• 2009

In this study, applied to the industrial water service, it is verified feasibility of break-even analysis method which has not been introduced in Korea. The On-san water pipeline of 7.1km among the Ul-san industrial water service is selected and the optimal replacement time calculated by break-even analysis method is year 2033 to 2044 which will be 53 to 67 years since the pipes were buried. If indirect cost such as the value of lost water and traffic disruption, service interruption, etc. is calculated as 30 and 100% of the direct cost, the financially optimum replacement time is advanced 3 to 9 years. These ways present rational criteria to establish long-term plan for budget and to execute the limited budget efficiently.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권4호
• /
• pp.143-151
• /
• 2000

Electric power distribution feeders are susceptible to faults caused by a variety of situations such as adverse weather conditions, tree contacts, equipment failure, accidents, etc. Distribution circuit faults result in a number of problems related to the reliability of service and customer power quality. In the distribution line, the permanent interruption of customer service resulting from a blown fuse or a recloser lockout was the only factor which was used to determine service reliability. On underground distribution line, the serving of cables by earth-moving equipment is a prevalent cause of faults and the most cable faults quickly develop into bolted current. we introduce th multi-circuit breaker coordination methods in the Underground Distribution Line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.932-934
• /
• 1998

Electric power distribution feeders are susceptible to faults caused by a variety of situations such as adverse weather conditions, tree contacts, equipment failure, accidents, etc. Distribution circuit faults result in a number of problems related to the reliability of service and customer power quality. In the past, the permanent interruption of customer service resulting from a blown fuse or a recloser lockout was the only factor which was used to determine service reliability. So we developed KODAS(Korea Distribution Automation System) with successful and had fieid-testing of Distribution Automation System in last three years at Kang-dong Branch Office. In performing the project, KEPRI has gained valuable experience, through dealing with many difficult problem. This paper is depicted about the circuit breaker coordination problems in the Underground for the Distribution Automation Feeder.