• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.117-124
• /
• 2013

Objective: This paper presents additional considerations related to organization and safety culture extracted from recent human error incidents in Korea, such as station blackout(i.e., SBO) in Kori#1. Background: Safety culture has been already highlighted as a major cause of human errors after 1986 Chernobyl accident. After Fukushima accident in Japan, the public acceptance for nuclear energy has taken its toll. Organizational characteristics and culture became elucidated as a major contributor again. Therefore many nuclear countries are re-evaluating their safety culture, and discussing any preparedness and its improvement. On top of that, there was an SBO in 2012 in the Kori#1. Korean public feels frustrated due to the similar human errors causing to a catastrophe like Fukushima accident. Method: This paper reassesses Japan's incidents, and revisits Korea's recent incidents. It focuses on the analysis of the hazards rather than the causes of human errors, the derivation of countermeasures, and their implementation. The preceding incidents and conclusions from Japanese experience are also re-analyzed. The Fukushima accident was an SBO due to the natural disaster such as earthquakes and a successive tsunami. Unlike the Fukushima accident, the Kori#1 incident itself was simple and restored without any loss and radioactive release. However, the fact that the incident was deliberately concealed led to massive distrust. Moreover, the continued violation of rules and organized concealment of the accident are serious signs of a new distorted type of human errors, blatantly revealing the cultural and fundamental weakness of the current organization. Result: We should learn from Japanese experiences who had taken pride in its safety technology and fairly high confidence in safety culture. Japan's first criticality accident in JCO facility splashed cold water on that confidence. It has turned out to be a typical case revealing the problems in the organization and safety culture. Since Japan has failed to gain lessons and countermeasure, the issue persists to the Fukushima incident. Conclusion: Safety culture is not a specific independent element, which makes it difficult to either evaluate it properly or establish countermeasures from the lessons. It may continue to expose similar human errors such as concealment of incident and manipulation of bad data. Application: Not only will this work establish the course of research for organization and safety culture, but this work will also contribute to the revitalization of Korea's nuclear industry from the disappointment after the export contract to UAE.

• The Plant Pathology Journal
• /
• v.36 no.4
• /
• pp.305-313
• /
• 2020

Host shifting and host expansion of fungal plant pathogens increases the rate of emergence of new pathogens and the incidence of disease in various crops, which threaten global food security. Magnaporthe species cause serious disease in rice, namely rice blast disease, as well as in many alternative hosts, including wheat, barley, and millet. A severe outbreak of wheat blast due to Magnaporthe oryzae occurred recently in Bangladesh, after the fungus was introduced from South America, causing great loss of yield. This outbreak of wheat blast is of growing concern, because it might spread to adjacent wheat-producing areas. Therefore, it is important to understand the host range and population structure of M. oryzae and related species for determining the evolutionary relationships among Magnaporthe species and for managing blast disease in the field. Here, we collected isolates of M. oryzae and related species from various Poaceae species, including crops and weeds surrounding rice fields, in Korea and determined their phylogenetic relationships and host species specificity. Internal transcribed spacer-mediated phylogenetic analysis revealed that M. oryzae and related species are classified into four groups primarily including isolates from rice, crabgrass, millet and tall fescue. Based on pathogenicity assays, M. oryzae and related species can infect different Poaceae hosts and move among hosts, suggesting the potential for host shifting and host expansion in nature. These results provide important information on the diversification of M. oryzae and related species with a broad range of Poaceae as hosts in crop fields.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.169-174
• /
• 2007

A huge marine accident causes a loss of valuable lives, property and the serious environmental contamination. In the IMO, active discussions about a potential occurrence possibility of marine accidents and appropriate place(place of refuge) to minimize the damage are being developed as appropriate transferring vessels which has a worry of a secondary marine environmental pollution from a previous marine accident Our country has a great potential et marine accidents due to the foreign vessel in distress because there is a huge vessel traffic amounts of the passage since which locate with in the important navigation connects the Asian region. and North America centering around north Pacific Ocean Also, we need the minimize the secondary damage from accident which occurs in domestic ports as transferring safe쇼 place when it is needed In this paper, analyzed and investigated a designated the place of refuge that analyze foreign cases, and will make a efficient and reasonable investigating plan of interior place of refuge.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.39-51
• /
• 2017

Recently, looking at construction sites with either large or small scale, accidents like collision, fall, etc. occur often. These accidents lead to not only damage of human lives but also serious economic loss. In case of large scale constructions sites, safety management systems are used to reduce industrial accidents. However in construction sites with small scale, those systems cannot be applied due to problems such as lack of compatability and high installation expense. In this case, just by putting on safety gears can also reduce industrial accidents. Therefore, in this paper, a safety management systems that can be used at both large and small scale construction sites is proposed. This safety management system consists of a smart module, a repeater and a gateway, and a monitoring system. The smart module, which is detachable, is attached to a safety helmet. This module transfers the current status of the user to the monitoring system through the repeater and the gateway. The repeater transfers the data received from the smart module to the gateway, and the gateway sends the data from the repeater to the monitoring system. The monitoring system shows the user status to the safety supervisor by displaying the data - temperature, height, intensity of illumination, images - received from the smart module. The safety supervisor can monitor the user status in real-time and take immediate action in case of emergency through this monitoring system.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.279-290
• /
• 2008

Landslide, one of the serious natural disasters, has Incurred a large loss of human and material resources. Recently, many forecasting or alarm systems based on various kinds of measuring equipment have been developed to reduce the damage of landslide. However, only a few of these equipments are guaranteed to evaluate the safety of whole side of land slope with their accessibility to the slope. In this study, we performed some experiments to evaluate the applicability of a terrestrial LiDAR as a surveying tool to measure the displacement of a land slope surface far a slope collapsing protection system. In the experiments, we had applied a slope stability method to a land slope and then forced to this slope with a load increasing step by step. In each step, we measured the slope surface with both a total station and a terrestrial LiDAR simultaneously. As the result of Slope Fracturing analysis using all targets, the LiDAR system showed that three was 1cm RMSE on X-axis, irregularity errors on Y-axis and few errors on Z-axis compare with Total Station. As the result of Slope Fracturing analysis using continuous targets, the pattern of Slope Fracturing was different according to the location of continuous targets and we could detect a continuous change which couldn't be found using Total station. The accuracy of the LiDAR data was evaluated to be comparable to that of the total station data. We found that a LiDAR system was appropriate to measuring the behaviour of land slope. The LiDAR data can cover the whole surface of the land slope, whereas the total station data are available on a small number of targets. Moreover, we extracted more detail information about the behavior of land slope such as the volume and profile changes using the LiDAR data.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.109-118
• /
• 1999

Seismic design code has been performed since 1988 in Korea, so it has not been applied to low-rise reinforced concrete buildings which had been built before 1988. Those building have been designed only for gravity loads based on non-seismic code, Therefore, even minor earthquake occurred, those buildings might have serious damages. In this paper, to investigate the behavior of low-rise reinforced concrete moment resisting frame which had been built in according to the building code of Korea that had been published before 1988, two type of 1/2 scaled exterior beam-column subassemblies which have non-seismic detailing based on the building code of Korea were constructed and tested with reversed cycling loading under the displacement control method. The special features of joint with non-seismic detailing is that there is no transverse reinforcement in the joint. In tests, cracks pattern, strength degradation, loss of stiffness, energy dissipation and the slippage of beam and column bars were investigated. Cracks did not occurred in the joint even seismic loading of 0.12g which is considered as peak ground acceleration in Korea was applied. And increasing seismic loading above 0.12g shear crack happened in the joint which have not transverse beam.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.1
• /
• pp.6-10
• /
• 2016

Esophageal atresia is the abnormal development of the esophagus that connects the mouth to the stomach. This birth defect results in the incomplete connection of the esophagus to the stomach causing an inability to swallow properly and breathing difficulties. Surgery is the only treatment for esophageal atresia. Patients undergone an esophageal reconstruction usually suffer from gastroesophageal reflex. A 5-year old boy with congenital esophageal atresia and Sciwitar syndrome visited Seoul National University Dental Hospital because generalized excessive loss of tooth structure. The patient had history of multiple operations for reconstruct esophagus. He had little food intake experience thought oral and had difficulty to swallowing. The patient was generalized severe erosive and decayed state. For patient, the dental procedure under general anesthesia was scheduled due to the multiple caries with erosion and poor cooperation. Under general anesthesia, pulpectomy and restoration as well as extraction was performed. Gastroesophageal reflex is potentially serious condition, with various extraesophageal adverse effects such as dental erosion. To prevent progression of dental caries, dietary counselling and oral hygiene instruction should be reinforced. Also, restorations to erosive teeth will maintain esthetics and function and preserve pulp vitality.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.62-67
• /
• 1994

Introduction : Recently, water and environmental pollution becomes serious social problem and high technology makes this pollution accelerate. Hydrogen sulfide, the main subject of our research, is one of the most dangerous air pollutant like SO$_x$ and NO$_x$. The major contaminant in coal gasification is H$_2$S, which is very toxic, hazardous and extremely corrosive. Therefore, control of hydrogen sulfide to a safe level is essential. Although commercial desulfurization process called liquid scrubbing is effective for removal of H$_2$S, it has drawbacks, the loss of sensible heat of the gas and costly wastewater treatment. Many investigations are carried out about high-temperature removal ol H$_2$S in hot coal-derived gas using metal oxide or mixed metal qxide sorbents. It was reported that ZnO was very effective sorbent for H2S removal, but it has big flaw to vaporize elemental zinc above 600\ulcorner \ulcorner As alternative, metal oxides such as CaO, $Fe_2O_3$, TiO$_2$ and CuO were added to ZnO. Especially, different results are reported for $Fe_2O_3$ additive. Tamhankar et al. reported SiO$_2$ with 45 wt% $Fe_2O_3$ sorbent is favorable for removal of H$_2$S and regeneration.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.52-60
• /
• 2016

Many hidden aspects of society around the world that has been lurking as risk factors have been ultimately connected to disasters. Such connection did not just stop with massive damages to properties and loss of lives but became a serious social issue. Especially in the case for Korea, because the country has gone through abrupt economic growth which has resulted in rapid urbanization and expansion of economic scale, Korea has been caught in a vicious cycle of experiencing human and social calamities repeatedly. Due to the seriousness of such problem, there's been continued research in various fields for managing disasters, and the domain of knowledge has been expanding with complexity. The following study went beyond the perspectives of disaster prevention study, disaster prevention engineering and social sciences suggested from previous research directions in disaster and disaster prevention, and attempted an alternative research method by approaching from a service design perspective. During the process, the paper looked over the summary on disaster and service design. By applying it on disaster prevention projects, the research sets forth and discusses effective and practical disaster prevention service design. Through specific case studies, the research methodology applied was verified, and the purpose of the study was carried out in the perspective of real world applications different from textbook type discussions. It is expected that through the disaster prevention service design process and platform that were discovered during the research result, defining and understanding disaster prevention service design will be made apparent. Additionally, the research is expected to be used as a basic building block for building a visualized plan for tangible and intangible factors related to disasters before the disaster process through such proposed disaster prevention service design.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.396-400
• /
• 1985

For investigation of the optimum gas composition for CA storage of Shingo pear, the pears were kept at 8 different $O_2/CO_2$ concentrations for 5 months and checked in some indices related in storability and sensory quality after storage and transfer to air at $20^{\circ}C$ for 1 week. The pears kept in all the CA storage conditions in this experiment, especially in $3%\;O_2-3%,\;CO_2$, were lower in weight loss than the pears kept in cold room. Immediately after storage decay rates of the pears stored at CA storage conditions except $3%\;O_2-3%,\;CO_2$ and $3%\;O_2-4%,\;CO_2$ were more serious than that of the pears stored at cold room, and the rates of the pears, especially stored at cold room, were rapidly increased by exposure to $20^{\circ}C$ after storage. The highest soluble solid content and firmess were shown in the pears stored at the CA storage condition of $3%\;O_2-3%,\;CO_2$, and the pears stored at the conditions of $3%\;O_2$ and $4%{\sim}5%\;CO_2$ had the highest acidity. In sensory evaluation the pears kept at the conditions of $3%O_2-3%$, 4% and 5% $CO_2$ maintained a good quality after storage and after storage and transfer to air at $20^{\circ}C$ for 1 week.