• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.267-271
• /
• 2013

Objective: The purpose of this study is to examine the test-retest reliability of paper-pencil test for investigating population stereotype of burner-control linkages of four-stove gas ranges. Background: Much of the research on gas-range stereotype strength has been performed using the paper-pencil test. While the use of the paper-pencil tests has the advantage of collecting data in a large group of subjects against reasonable costs, concerns regarding the reliability of the paper-pencil test has also been stated. Method: Three paper-pencil tests classified by intervals of test-retest were performed, in which eight types of burner-control arrangements were investigated. Sixty eight subjects were test-retested within two weeks, 85 subjects were test-retested within four weeks and 58 subjects were test-retested three times in series with interval of two and four weeks. Results: Chi-square test showed that three intervals of test-retest including two, four and two & four weeks have not statistically significant effect on subjects' responses irrespective of eight types of burner-control linkages dealt with in this study(p>0.10). Concordance rates of subjects' responses ranged between 73.5% and 100.0% for two-week test-retest, between 67.1% and 97.6% for four-week test-retest, and between 65.5% and 100.0% for two- and four-week serial test-retest. The concordance rates were linearly correlated with proportion of subjects' responses for stereotypes of burnercontrol linkages. Conclusion: It is concluded that the paper-pencil tests for investigating gas range relevant stereotypes could reproduce reliable results compared to baseline test within interval of four weeks. Application: The results of this study would be useful as an ergonomic guideline when designing the paper-pencil tests for stereotype relevant studies.

• Korean Journal of Biological Psychiatry
• /
• v.17 no.2
• /
• pp.79-85
• /
• 2010

Objectives : Trauma patients have attentional bias which enforces traumatic memories and causes cognitive errors. Understanding of such selective attention may explain many aspects of the posttraumatic stress disorder(PTSD) symptoms. Methods : We used the rapid serial visual presentation(RSVP) method to verify attentional blink in burn patients with PTSD. International affective picture system(IAPS) was used as stimuli and distracters. In the 'neutral test', patients have been presented series of pictures with human face picture as target stimuli. Each picture had 100ms interval. However the distance between target facial pictures was randomized and recognition of second facial picture accuracy was measured. In the 'stress test', the first target was stress picture which arouses patient emotions instead of the facial picture. Neutral and Stress tests were done with seven PTSD patients and 20 controls. In '85ms test' the interval was reduced to 85ms. The accuracy of recognition of second target facial picture was rated in all three tests. Eighty-five ms study was done with eighteen PTSD patients. Results : Attentional blinks were observed in 100-400ms of RSVP. PTSD patients showed increased recognition rate in the 'stress test' compared with the 'neutral test'. When presentation interval was decreased to 85 ms, PTSD patient showed decrease of attentional blink effect when target facial picture interval was 170ms. Conclusion : We found attentional blink effect could be affected by stress stimulus in burn patients. And attentional blink may be affected by stimulus interval and the character of stimulus. There may be some other specific mechanism related with selective attention in attentional blink especially with facial picture processing.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.2
• /
• pp.289-301
• /
• 2013

We analyze respondents' reaction to Obama's advertisement, titled 'Fix the Economy'. These respondents are divided into three groups of democratic party, republican party and independent group. By manipulating the skin complexion of the Obama photo, participants were either exposed to the dark or light version of the Obama photograph. In order to obtain decorrelated stationary data, we have applied the discrete Fourier transform to each curve and then we have applied Fan (1998)'s adaptive Neyman test to the discrete Fourier transformed data. As a result, a significant difference is found out only in the independent group.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1401-1407
• /
• 2002

This paper represents an investigation of the vehicle-to-vehicle distance control system using Hardware-in-the-Loop Simulation(HiLS). Control logic is primarily developed and tested with a specially equipped test vehicle. Establishment of an efficient and low cost development tool is a very important issue, and test vehicle approach is costly and time consuming. HiLS method is useful in the investigation of driver assistance and active safety systems. The HiLS system consists of a stepper motor for throttle control, a hydraulic brake system with an electronic vacuum booster, an electronic controller unit, a data logging computer which are used to save vehicle states and signals of actuator through a CAN and a simulation computer using mathematical vehicle model. Adaptation of a CAN instead of RS-232 Serial Interface for communication is a trend in the automotive industry. Since this environment is the same as a test vehicle, a control logic verified in laboratory can be easily transferred to a test vehicle.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.134-140
• /
• 2011

The present paper deals with characteristics of resistance performance according to the variation of synthetic ice thickness and hull form. The resistance test has been conducted with pack ice condition in Pusan National University towing tank. Waterline angle has been chosen as a main parameter for the variation of hull form characteristics, which is the most important factor especially in icebreaking cargo vessel. The serial comparisons of resistance test have been done with the variation of hull form parameter as well as with the different thickness of synthetic ice. The different trend of resistance performances with increasing of waterline angle has been shown at each synthetic ice thickness. The present test results is expected to be confirmed by comparing the test results in ice tank in the near future.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.11
• /
• pp.768-775
• /
• 2004

The SSA technique in the digital circuit test is required to be repeated the input pattern stream to n bits output nodes n times in case of using a multiplexor. Because the method adopting a parallel/serial bit convertor to remove this inefficiency has disadvantage of requiring the test time n times for a pattern, the test strategy is required, which can enhance the test productivity by reducing the test time based on simplified fault detection mechanism. Accordingly, this paper proposes a test strategy which enhances the test productivity and efficiency by appling PAS (Parallel Signature Analysis) technique to those after analyzing the structure and characteristics of the digital devices including TTL and CMOS family ICs as well as ROM and RAM. The PSA technique identifies the faults by comparing the reminder from good device with reminder from the tested device. At this time, the reminder is obtained by enforcing the data stream obtained from output pins of the tested device on the LFSR(Linear Feedback Shift Resister) representing the characteristic equation. Also, the method to obtain the optimal signature analyzer is explained by furnishing the short bit input streams to the long bit input streams to the LFSR having 8, 12, 16, 20bit input/output pins and by analyzing the occurring probability of error which is impossible to detect. Finally, the effectiveness of the proposed test strategy is verified by simulating the stuck at 1 errors or stuck at 0 errors for several devices on typical 8051 digital board.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2374-2376
• /
• 2004

In this paper, we describe a DSP-based test apparatus for Control Element Drive Mechanism (CEDM). Using this apparatus, we can catch the mechanical and electrical characteristics of CEDM and obtain the information about the improvement of CEDM and the design of CEDM power controller. The test apparatus for CEDM introduced in this paper can input firing angles directly into gate drive circuits of thyristors so that this method can be used to derive the maximum and minimum values of firing angles within available limits for a 3-phase half-wave rectifier. Angle inputs help us understand each coil's response characteristics. Since this apparatus generates a serial sequence for CEDM insertion and withdrawal operations, we may judge whether CEDM works correctly as expected or not in each phase of a step movement.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.4
• /
• pp.264-271
• /
• 2013

Purpose: We aimed to analyze the effect of fixation tightness of the syndesmotic screw and its indwelling period on the recurrence of the syndesmosis widening after screw removal and the clinical outcomes. Materials and Methods: Forty consecutive patients with acute syndesmotic injury were retrospectively reviewed. The tibiofibular clear space is measured by digitalized measurement tool on serial radiographs. We analyzed the effect of time from trauma to fixation, syndesmotic screw indwelling duration, and fixation methods. Residual symptoms at the last follow up were evaluated. The student t-test, correlation test, and chi-square test were used for statistical analysis. Results: Eighteen ankles (45%) had recurrent syndesmosis widening (greater than 5% compared to the contralateral side). Seven patients had pain and five had limitation of motion in the ankle joint. Fixation tightness had significant effect on reducing the recurrence while the severity of the initial widening, time to fixation, and duration of fixation did not affect the outcome. Conclusion: Tight fixation of syndesmotic screw is essential for achieving final syndesmotic stability and reducing recurrence.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.189-191
• /
• 1996

Computerized spirometer was developed in a form of proto type system. The system consisted of pneumotachometer, flow measurement unit, fan ventilator unit, and software program. Patient's respiratory flow signal was first converted to corresponding pressure drop signal by a screen type pneumotachometer, sensed by a differential pressure transducer, amplified and low pass filtered, and digitized at a rate of 100 Hz, then fed into a PC thru RS-232C serial port. Customized application software controls data acquisition followed by computation of test parameters. The fan ventilator unit dries and eliminates microorganism in the pneumotachometer after each test. The system performs conventional spirometic tests and manages the test results in a database for retrograde research. The proto type system was fully developed and the commercialized system is currently being built up.