• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.203-215
• /
• 2011

Geochemical and mineralogical properties of a contamited soil should be taken into account to decide a remediation strategy for a given contaminant because development and optimization of soil remedial technologies are based on geochemical and mineralogical separation techniques. The objective of this study was to investigate the geochemical and mineralogical characteristics of arsenic-contaminated soils. The arsenic-contaminated soil samples were obtained from Chonam gold mine, Gwangyang, Chonnam, Particle size analysis, sequential extraction, and mineralogical analyses were used to characterize geochemical and mineralogical characteristics of the As-contaminated soils. Particle size analyses of the As-contaminated soils showed the soils contained 17-36% sand, 25-54% silt, 9-28% clay and the soil texture were sandy loam, loam, and silt loam. The soil pH ranged from 4.5 to 6.6. The amount of arsenic concentrations from the sequential soil leaching is mainly associated with iron oxides (1 to 75%) and residuals (12 to 91%). Major minerals of sand and silt fractions in the soils were feldspar, kaolinite, mica, and quartz and minor mineral of which is an iron oxide. Major minerals of clay fraction were composed of illite, kaolinite, quartz, and vermiculite. And minor minerals are iron oxide and rutile. The geochemical and mineralogical analyses indicated the arsenic is adsorbed or coprecipitated with iron oxides or phyllosilicate minerals. The results may provide understanding of geochemical and mineralogical characteristics for the site remediation of arsenic-contaminated soils.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.109-115
• /
• 1997

Laser cladding is a technique for modification of metal surface. In this laser cladding experiment a metal powder feeding system was developed for more efficient laser cladding. This system can reduce processing time and be used simpler than the conventional method. The feeding of metal powder has given a rise to the process for sequential buildup of bulk rapidly solidified materials in the form of fine powder stream to the laser cladding process. The parameters of laser cladding have been investigated using this experimental equipment. Bronze on aluminum alloy and copper on aluminum alloy were experimented by using defocused beam, powder feeding system, and gas shielding. Good cladding was achieved in the range of beam travel speed of 2.25m/min. In the case of copper/aluminum and bronze/aluminum substrate, the absorption of laser beam was too high to produce low diluted clad. In the case of copper/1050 aluminum, the optimal laser cladding condition was of laser power of 2.8kW, powder feed rate of 0.31g/s and beam travel speed of 2.25m/min. In the case of bronze/aluminum the optimal condition is of laser power of 2.5kW, powder feed rate of 0.31g/s, and beam travel speed of 2.36m/min.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.14-23
• /
• 2011

The purpose of this study is to analyse the inclinations and expressions in contemporary architecture. Specially, we call this tendency and architectural movements as architectural metamorphosis. Metamorphosis in architecture present the core of the change of Forms and spirits in a change of outward shape and terrestrial identity. As in Ovid's extended dramatic poem of change and transformation, Metamorphoses, all Souls are deathless, and migrates from one form to another. Like these stories in Metamorphoses, Ovid tells the soul never dies, but leaps one form to anther, and can take any shape. So the architectural form, transformation and deformation in contemporary architecture means architectural sensations and cognitions can even approach the soul of form and shape under the transformation. The expressions and design strategies of metamorphosis in comtemporary architecture reveal continuous and sequential formations of space, linear structure with force and vector, rhythmical wavement and folding surface, lively wiggly flows of volumns and objects, and so on. Such qualities came from the periodical needs; separation of structure and surface, poly-surfacial movement, poly-sensual expression and experience, dematerialization and the dematerialized space, formless of non-formal architecture, digital architecture. Architecture of Metamorphosis is the ways and the needs of our period to overcome the static limits prohibits the liberal thoughts, to find the ways toward the opportunities and diversities and to unlock the imaginaire of the contemporary architecture.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3B
• /
• pp.211-220
• /
• 2011

In this study a conceptual soil water model is proposed to simulate water balance at catchment scale. The model is based on the sequential separation of daily precipitation into surface runoff, wetting, vaporization, and percolation. The proposed model is calibrated by using three observation sets: empirically estimated annual vaporization, monthly wetting estimated by NRCS-CN method, and both of them. The model performance is evaluated to understand which hydrologic components for calibrating the model are needed. It is shown that both of annual vaporization and monthly wetting are indispensable hydrologic components to simulate reasonably precipitation partitioning.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.69.1-69.1
• /
• 2010

IC 443 is famous for its interaction with nearby molecular clouds and intense H2 emission lines in infrared. Therefore, it has been studied extensively for the understanding of molecular shocks. We observed H2 mission lines toward the shock-cloud interaction regions of IC 443, known as clumps B, C, and G. The observations were performed with the InfraRed Camera (IRC) onboard a satellite AKARI over 2.5-5.0 um, where previous space observations, e.g. Infrared Space Observatory (ISO) and Spitzer, do not cover. Our AKARI observations provide spectra of sequential pure-rotational and ro-vibrational H2 emission lines. For the clumps C and G, combining with previous mid-infrared observational results, we found that the H2 level populations show a significant separation between v=0 and v=1 levels; v=1 levels are under-populated than v=0 levels, therefore, the population cannot be described by two temperature LTE model, as many people have analyzed for the shocked H2 gas. We also applied the thermal admixture model, dN(H2; T)~T^(-b) dT, with varying ortho-to-para ratios according to the temperature, to describe the level population, and obtained plausible ranges of the H2 gas density and power-law index b.

• BMB Reports
• /
• v.29 no.4
• /
• pp.335-342
• /
• 1996

Porcine liver cysteinesulfinic acid decarboxylase was purified approximately 460-fold by means of ammonium sulfate fractionation and sequential column chromatographic separation with Sephadex G-100, DEAE-cellulose and hydroxylapatite. The enzyme has a flat pH profile with maximum activity occurring between pH 6.0 and 7.6. Pyridoxal 5'-phosphate must be present in all buffers used for purification procedures in order to stabilize the enzyme. Addition of sulfhydryl reagents such as 2-mercaptoethanol are also necessary to maintain maximum enzyme activity throughout purification. The absorption spectrum shows that cysteinesulfinic acid decarboxylase is a pyridoxal 5' -phosphate-containing protein. The major absorption is at 280 nm with two smaller absorption regions, one at 425 nm which is ascribed to a Schiffs base between pyridoxal phosphate and protein, and another at 325 nm which is thought to be due to the interaction of 2-mercaptoethanol with the Schiffs base. A number of divalent cations tested did not affect enzyme activity with the exception of mercury, copper, and zinc which are inhibitory. The partially purified enzyme has an apparent $K_m$ of 0.94 mM for cysteinesulfinate. Cysteic acid is a competitive inhibitor of the enzyme with a $K_i$ of 1.32 mM. The molecular weight of the enzyme was estimated to be about 79,600 by using Sephadex G-200 column chromatography.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2921-2924
• /
• 2013

Immunoliposomes (antibody-conjugated liposomes) are highly useful as both a drug carrier in drug delivery and as a reporting probe in immunodiagnostics. However, antibody conjugation is lengthy and cumbersome, because this includes several steps such as derivatization of the antibody, conjugation of the derivatized antibody to liposomes, and separation of the unbound antibodies from immunoliposomes. Recently, liposome preparation steps have simplified by using microfluidic devices (${\mu}FDs$) where liposomes are formed when a stream of lipids in solvent is hydrodynamically focused between two oblique buffer streams in a microchannel. Herein, we report a simple method for the production of immunoliposomes (rabbit IgG-conjugated liposomes) using microvalve-controlled ${\mu}FD$. The presence of antibody on the liposome was verified by observing the binding of immunoliposomes to rabbit IgG on the surface. The results suggest that immunoliposomes can be easily prepared through sequential mixing of antibody, conjugation reagents, preformed liposomes using microvalve-controlled ${\mu}FD$.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.481-486
• /
• 2012

Accurate and efficient estimation of the number of sources is critical for providing the parameter of targets in problems of array signal processing and blind source separation among other such problems. When conventional estimators work in unfavorable scenarios, e.g., at low signal-to-noise ratio (SNR), with a small number of snapshots, or for sources with a different strength, it is challenging to maintain good performance. In this paper, the detection limit of the minimum description length (MDL) estimator and the signal strength required for reliable detection are first discussed. Though a comparison, we analyze the reason that performances of classical estimators deteriorate completely in unfavorable scenarios. After discussing the limiting distribution of eigenvalues of the sample covariance matrix, we propose a new approach for estimating the number of sources which is based on a sequential hypothesis test. The new estimator performs better in unfavorable scenarios and is consistent in the traditional asymptotic sense. Finally, numerical evaluations indicate that the proposed estimator performs well when compared with other traditional estimators at low SNR and in the finite sample size case, especially when weak signals are superimposed on the strong signals.

• Clean Technology
• /
• v.16 no.1
• /
• pp.64-70
• /
• 2010

In this study, we suggest the application of the divided-wall column (DWC) to the existing trichlorosilane(TCS) purification process in the commercial polysilicon manufacturing process. Using Aspen HYSYS V7.1, an extensive simulation study was carried out for the analysis of the energy consumptions and capital cost for the conventional sequential distillation configuration and the DWC for producing a given purity and yield of trichlorosilane. As a result, it is shown that the DWC saves the separation energy by 61% and the equipment cost by 58% compared with the conventional distillation process.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.456-464
• /
• 2022

Hydrogen permeation performance was analyzed by manufacturing Pd and Pd-Cu membranes through electroless plating. As a support for the Pd and Pd-Cu membranes, α-Al₂O₃ ceramic hollow fiber were used. Pd-Cu membrane was manufactured through sequential electroless plating, and then annealing was performed at 500°C, for 18 h in a hydrogen atmosphere to make Pd and Cu alloy. After annealing, the Pd-Cu membrane confirmed that the alloy was formed through EDS (Energy Dispersive X-ray Spectroscopy) and XRD (X-ray Diffraction) analysis. In addition, the thickness of the Pd and Pd-Cu plating layers were measured to be about 3.21 and 3.72 µm, respectively, through SEM (Scanning Electron Microscope) analysis. Hydrogen permeation performance was tested for hydrogen permeation in the range of 350~450°C and 1~4 bar in hydrogen single gas and mixed gas (H₂, N₂). In a single hydrogen gas, Pd and Pd-Cu membranes have flux of up to 54.42 and 67.17 ml/cm²⋅ min at 450 °C and 4 bar. In the mixed gas, it was confirmed that the separation factors of 1308 and 453 were obtained under the conditions of 450 °C and 4 bar.