• 전기의세계
• /
• 제18권6호
• /
• pp.33-45
• /
• 1969

The purpose of this paper is design the most important part of sequential control systems, that is, command-treatment part, from the signal-transformation point of view. An orderly procedure is developed by which for sequential control systems the experimental design method can be reduced to the rational design method. Important in this procedure are: 1. To make total block diagram of sequential control systems by determining input and output signals of command-treatment part. 2. To partition over-all block diagram by observing each output signal. 3. To design concretely minimum block diagram by using the operational block diagram. By applying the method for partitioning the circuit to the design, the design method for sequential control systems is organized and done rationally without the aid of experiece.

• 응용통계연구
• /
• 제28권1호
• /
• pp.93-102
• /
• 2015

D-최적 등을 위시한 최적실험은 비선형모형인 경우 추정을 하여야할 모수에 의존하는 문제점이 존재한다. 따라서 기본적으로 문헌에서는 모수추정을 위해서는 순차실험을 제안한다. 본 연구에서는 2단계 실험설계를 모수추정의 사례를 포함한 다양한 환경 하에서의 사용방법을 알아보았다. 본 연구에서 제안한 내용은 단계의 수나 구체적인 실험기준의 숫자에 상관없이 적용되는 범용적인 기준이다. 본 연구는 2단계 실험에서 3개 이상의 실험목적을 가지고 있는 경우 하이브리드(hybrid)방법을 제안하였다. 모든 실험은 근사실험설계의 형태로 논의되었다.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.203-210
• /
• 2002

For effective response surface modeling during sequential approximate optimization (SAO), the normalized and the augmented D-optimality criteria are presented. The normalized D-optimality criterion uses the normalized Fisher information matrix by its diagonal terms in order to obtain a balance among the linear-order and higher-order terms. Then, it is augmented to directly include other experimental designs or the pre-sampled designs. This augmentation enables the trust region managed sequential approximate optimization to directly use the pre-sampled designs in the overlapped trust regions in constructing the new response surface models. In order to show the effectiveness of the normalized and the augmented D-optimality criteria, following two comparisons are performed. First, the information surface of the normalized D-optimal design is compared with those of the original D-optimal design. Second, a trust-region managed sequential approximate optimizer having three D-optimal designs is developed and three design problems are solved. These comparisons show that the normalized D-optimal design gives more rotatable designs than the original D-optimal design, and the augmented D-optimal design can reduce the number of analyses by 30% - 40% than the original D-optimal design.

• 품질경영학회지
• /
• 제40권4호
• /
• pp.431-440
• /
• 2012

Purpose: In this paper we propose modified Notz designs which are useful to experimenters who want to adopt the sequential experimentation strategy and to estimate second-order regression model with as few experimental points as possible. Methods: We first present the design matrices and design points in two or three dimensional spaces for such small sized second-order designs as small composite, hybrid, and Notz designs. Modified Notz designs are proposed and compared with some response surface designs in terms of the total number of experimental points, the estimation capability criteria such as D- and A-optimality. Results: When sequential experimentation is necessary, the modified Notz designs are recommendable. Conclusion: The result of this paper will be beneficial to experimenters who need to do experiments more efficiently, especially for those who want to reduce the time of experimentation as much as possible to develop cutting-edge products.

• 품질경영학회지
• /
• 제49권1호
• /
• pp.31-45
• /
• 2021

Purpose: A noncentral composite design method is to be developed to explore farther region for the first factorial design. A general guideline for sequential experimentation is provided. Methods: (1) A non-overlapping noncentral composite design (NNCD) is developed, in which the second factorial design shares one design point that indicates the best response value in the first factorial design. (2) Four composite designs are compared in terms of the four design evaluation criteria, which are D-, A, G, and I-optimality. (3) A follow-up design strategy is suggested based on the interaction effect, direction of improvement, number of factors. Results: (1) NNCD and model building method are presented, which is useful for exploring farther region from first factorial design block. (2) The performances of the four composite designs are compared. (3) A follow-up design strategy is suggested. Conclusion: (1) NNCD will be useful to explore farther region for the first factorial design. (2) A follow-up design strategy can be beneficial to the experimental practitioners for product and process design and improvement.

• 전자공학회논문지A
• /
• 제31A권4호
• /
• pp.106-115
• /
• 1994

This paper presents the design of a technology mapping system for optimizing delays of combinational and synchronous sequential logic circuits. The proposed system performs delay optimization for combinational logic circuits by remapping, buffering, and gate merging methods through the correct delay calculation in which the loading values are considered. To get time optimized synchronous sequential circuits, heuristic algorithms are proposed. The proposed algorithms reallocate registers by considering the critical path characteristics. Experimental results show that the proposed system produces a more optimized technology mapping for MCNC benchmarks compared with mis-II.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.7-13
• /
• 1997

To overcome the large hardware overhead attendant in the full scan design, the concept of partial scan design has emerged with the virtue of less area and testability close to full scan. Combinational Structure has been developed to avoid the use of sequential test generator. But the patterns sifted on scan register have to be held for sequential depth period upon the aid of the dedicated HOLD circuit. In this paper, a new levelized structure is introduced aiming to exclude the need of extra HOLD circuit. The time to stimulate each scan latch is uniquely determined on this structure, hence each test pattern can e applied by scan shifting and then pulsing a system clock like the full scan but with much les scan flip-flops. Experimental results show that some sequential circuits are levelized by just scanning self-loop flip-flops.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1204-1209
• /
• 1990

This paper offers the theory and method for regression analysis of the regression model with operational parameter variables based on the fundamentals of mathematical statistics. Regression coefficients are usually constants related to the problem of regression analysis. This paper considers that regression coefficients are not constants but the functions of some operational parameter variables. This is a kind of method of two-step fitting regression model. The second part of this paper considers the experimental step numbers as recursive variables, the recursive identification with unknown operational parameter variables, which includes two recursive variables, is deduced. Then the optimization and the recursive identification are combined to obtain the sequential experiment optimum design with operational parameter variables. This paper also offers a fast recursive algorithm for a large number of sequential experiments.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.842-851
• /
• 2005

In this paper, a new method for constrained optimization of noisy functions is proposed. In approximate optimization using response surface methods, if constraints have severe noise, the approximate feasible region defined by approximate constraints is apt to include some of the infeasible region defined by actual constraints. This can cause the approximate optimum to converge into the infeasible region. In the proposed method, the approximate optimization is performed with the approximate constraints shifted by their deviations, which are calculated using a diagonal quadratic response surface method. This can prevent the approximate optimum from converging into the infeasible region. To fit the objective and constraints into diagonal quadratic models, we select the center and 4 additional points along each axis of design variables as experimental points. The deviation of each function is calculated using the differences between the real and approximate function values at the experimental points. A sequential approximate optimization technique based on the trust region algorithm is adopted to manage approximate models. The proposed approach is validated by solving some design problems. The results of the problems show the effectiveness of the proposed method.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.698-707
• /
• 2003

A new quadratic response surface modeling method is presented. In this method, the incomplete small composite design (ISCD) is newly proposed to .educe the number of experimental runs than that of the SCD. Unlike the SCD, the proposed ISCD always gives a unique design assessed on the number of factors, although it may induce the rank-deficiency in the normal equation. Thus, the singular value decomposition (SVD) is employed to solve the normal equation. Then, the duality theory is used to newly develop the conservative least squares fitting (CONFIT) method. This can directly control the ever- or the under-estimation behavior of the approximate functions. Finally, the performance of CONFIT is numerically shown by comparing its'conservativeness with that of conventional fitting method. Also, optimizing one practical design problem numerically shows the effectiveness of the sequential approximate optimization (SAO) combined with the proposed ISCD and CONFIT.