• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.79-86
• /
• 2001

This study shows an attempt to generate an assembly sequence and its model for a ship block assembly using the graph theory and graph algorithms. To generate the ship block assembly, we propose four levels of the ship block assembly model such as "geometry mode1", "relational model", "sequential mode1", and "hierarchical model". To obtain the relational model, we used surface and surface intersection algorithm. The sequential model that represents a possible assembly sequence is made by using several graph algorithms from the relational model. The hierarchical model will be constructed from the sequential model in order to represent the block assembly tree and so forth. The purpose of the hierarchical model is to define an assembly tree and to generate the Bill Of Material(BOM). Lastly, the validity of the method proposed in this study is examined with application to ship block assembly models of a single type and double type according to four models mentioned above.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.111-118
• /
• 2003

This paper proposes a two dimensional behavior analysis method for fish in a water tank based on the ARX method and the Kalman filter algorithm using image processing technology. In modeling the behavior of fish, the input is denoted as the environmental change and uses M-sequence. The output is expressed by the partnership between fish. The behavior model of individual fish is identified by the ARX method. It is then estimated by the Kalman filter algorithm. Finally, the fish behavior is analyzed by FFT. To prove the effectiveness of the pro-posed algorithm, it is applied to two tilapias in a water tank with dimensions of 100cm$\times$100cm$\times$50cm. The effectiveness of the proposed method is demonstrated through ARX identification, estimation of Kalman filter, and FFT analysis.

• Journal of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.143-147
• /
• 2001

UBVI CCD photometry of open cluster NGC 2324 is presented. C-M diagrams of this cluster show well-defined main sequence with a red giant clump centered at B - V =1.05, V =13.45. We derived the major cluster characteristics; E(B - V)=0.17$\pm$0.12 from color-color diagram and mean color of red giant clump stars, (m - M)o=13.1$\pm$0.1 from zero age main sequence fitting, and [Fe/H]$\~$-0.32 from comparison the theoretical model developed by Bertelli et al. (1994) to the observed C-M diagrams. We estimate the age of NGC 2324 to be log t$\~$8.8 by applying isochrone fitting and morphological age index method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.122-129
• /
• 2009

Frequency is an important operating parameter of a power system. It is essential that the frequency of a power system be maintained very close to its nominal frequency. And frequency measurement devices have need to measure a fast and accurate of frequency using voltage signals. This paper proposes a comparative study of frequency estimation techniques using the high speed FIR filter based algorithm, the DFT filter based algorithm using phasor angle between two phasors, and positive sequence component based algorithm using the half angle between two successive positions of phasor. The discussed three techniques have been formed through numerical manipulation of a discrete system. The proposed techniques have been tested using signals obtained from selected power system model using ATP simulation package. Some test results are shown in this paper.

• International Journal of Reliability and Applications
• /
• v.12 no.1
• /
• pp.49-60
• /
• 2011

The geometric process (GP) has been widely used for modeling failure and repair time sequences of repairable systems. The GP is mathematically tractable but restrictive in reliability applications since it actually assumes that the mean function of inter-failure times sequence asymptotically decreases to zero; and the mean function of successive repair times sequence asymptotically increases to infinity. This is generally unrealistic from an engineering perspective. This paper presents three extended GP models for modeling reliability deterioration and improvement (or growth) process. The extensions maintain the advantage of mathematical tractability of GP model. Their usefulness and appropriateness are illustrated with three real-world examples.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.26-31
• /
• 2004

This paper presents a process planning system that will generate and verify assembly sequences of block assemblies. It consists of a CAD interface system and an assembly sequence planning system. In developing this system, we used an open architecture CAD kernel for the CAD interface system, for visualizing the CAD model and the assembly sequences, and an expert system shell for the assembly sequence planning system. This paper also proposes a framework for the integration of all the steps required to automate the procedures, from design to production. The process planning system is demonstrated by a simple example.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.203-208
• /
• 2006

Channel estimation and data detection for OFDM systems over time- and frequency-selective channels are investigated. Relying on the complex exponential basis expansion channel model, a pilot-embedded channel estimation scheme with low computational complexity and spectral efficiency is proposed. A periodic pilot sequence is superimposed at a low power on information bearing sequence at the transmitter before modulation and transmission. The channel state information(CSI) can be estimated using the first-order statistics of the received data. In order to enhance the performance of channel estimation, we recover the transmitted data which can be exploited to estimate CSI iteratively. Simulation results show that the proposed method is suitable for doubly-selective channel estimation for the OFDM systems and the performance of the proposed method can be better than that of the Wiener filter method under some conditions. Through simulations, we also analyze the factors which can affect the system performances.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.282-284
• /
• 1999

This paper presents an accurate algorithm for fault location of a single phase to earth fault on a two-parallel transmission line using only one-terminal data. It is impossible to calculate the accurate fault distance, because of the unknown fault resistance and fault current at the fault point. The faulted line circuit and the zero-sequence circuit of two-parallel line are used as a fault location model, which the source impedance of the remote end is not involved. The algorithm can eliminate the effect of load flow and the fault resistance in calculating the fault location.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.81-89
• /
• 2016

In this paper, a beam ID preamble (BIDP) technique, where a beam ID is transmitted in the physical layer, is proposed for efficient beam training in millimeter-wave cellular communication systems. To facilitate beam ID detection in a multicell environment with multiple beams, a BIDP is designed such that a beam ID is mapped onto a Zadoff-Chu sequence in association with its cell ID. By analyzing the correlation property of the BIDP, it is shown that multiple beams can be transmitted simultaneously with the proposed technique with minimal interbeam interference in a multicell environment, where beams have different time delays due to propagation delay or multipath channel delay. Through simulation with a spatial channel model, it is shown that the best beam pairs can be found with a significantly reduced processing time of beam training in the proposed technique.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.4
• /
• pp.218-225
• /
• 2009

This paper considers a parallel-machine scheduling problem with job release times and sequence-dependent setup times. The objective of this problem is to determine the allocation policy of jobs and the scheduling policy of machines so as to minimize the weighted sum of setup times, delay times, and tardy times. A mathematical model for optimal solution is derived and a meta heuristic algorithm based on the improved ant colony system is proposed in this paper. The performance of the meta heuristic algorithm is evaluated through compare with optimal solutions using randomly generated several examples.