• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.7-13
• /
• 2006

Shape optimization of a rotor blade in a single-stage transonic axial compressor has been performed using a response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the rotor blade, which are used to define a blade skew, are introduced to increase an adiabatic efficiency. Throughout the shape optimization of a rotor blade, the adiabatic efficiency is increased to about 2.2 percent compared to that of the reference shape of the stator. The increase in efficiency for the optimal shape of the rotor is due to the pressure enhancement, which is mainly caused by moving the separation position on the suction surface of rotor blade to the downstream direction.

• 한국컴퓨터산업학회논문지
• /
• 제5권2호
• /
• pp.269-274
• /
• 2004

기존 음성 인식의 실세계 적용에서 큰 문제점은 잡음이다. 본 논문에서는 잡음이 섞인 음성 신호로부터 잡음 성분을 분리해 내는 방법을 제안한다. 이 방법은 잡음이 섞인 음성 신호에 독립성분분석(ICA:Independent Component Analysis)을 사용한 암묵신호 분리(blind source separation)를 적용하여 잡음 성분을 제거하게 된다. 잡음이 혼합된 음성 신호에 독립성분분석을 전처리(preprocessing) 과정에 이용함으로써 인식성능을 향상시킬 수 있다. 깨끗한 음성 신호에 음악과 거리잡음을 섞었을 경우 인식률이 잡음 없는 음성의 인식률보다 각각 최대 14.98%, 13.78%까지 저하되었다. 그러나 독립성분분석으로 복원된 음성의 경우 잡음 없는 음성의 인식률 수준(각각 97.39%, 96.49%)으로 나타났으며, 독립성분분석을 이용한 음성의 잡음 제거가 인식률 향상에 좋은 결과를 가져옴을 확인 할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.118-119
• /
• 2017

The combined waterproofing method is an excellent method to overcome the disadvantages of the single waterproofing method by composing two or more materials to complement each other, but it is a method that can cause defects such as separation and peeling between materials due to the heterogeneity of the applied two materials. In order to improve this, in this study, we aimed to develop a technology for inducing chemical unification between materials through a urea reaction with a coating material applied on the lower side by laminating a nonwoven fabric treated with a modified amine on the back surface of the sheet material, The adhesion performance test was carried out with the presence or absence of denatured amine treated nonwovens as variables. As a result of the test, it was confirmed that the adhesion performance of the specimen to which the modified amin - treated nonwoven fabric was applied was improved by about 60% or more as compared with the specimens not having the denatured amine treated specimen.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권2호
• /
• pp.16-19
• /
• 2018

Comprehensive utilization of zinc smelting iron slag not only solves environmental problems but also creates huge economic benefits. This study was conducted on the enrichment and recovery of ${\alpha}-Fe_2O_3$ from zinc smelting iron slag by superconducting HGMS technology. Several variables such as slurry flow velocity, slag concentration, magnetic field intensity and the amount of dispersing agent were tested in magnetic separation. In the experiments, obtained optimal magnetic separation parameters were 1.60 T of magnetic flux intensity, 600 mL/min of slurry flow velocity of, 15 g/L of slag concentration of, 0.10 g/L of dispersing agent. Under this condition, the content of ${\alpha}-Fe_2O_3$ was increased from 86.22% to 94.39% that can approach the Chinese national standard requirements (A level) of iron oxide red. It was concluded that using superconducting HGMS technology was an effective method for the purification of ${\alpha}-Fe_2O_3$ from zinc smelting iron slag.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.51-60
• /
• 2002

Strengthening of existing concrete structures is a major concern in recent years as the number of degraded structures increases. The purpose of this paper is to investigate the static and fatigue behavior of reinforced concrete (RC) beams strengthened with steel plates. To this end, a comprehensive test program has been set up and many series of strengthened beams have been tested. The major test variables include the plate thickness, adhesive thickness, and the shear-span to depth ratio. The test results indicate that the separation of plates is the dominant failure mechanism even for the full-span-length strengthened beams with steel plate. The theoretical ultimate load capacities for strengthened beams based on the full composite action of concrete beam and steel plate are found to be larger than the actual measured load capacities. The strengthened beams exhibit more dominant shear cracking as the shear-span to depth ratio decreases. The ultimate capacity of strengthened beams increases slightly with the increase of adhesive thickness, which may be caused by the late initiation of plate separation in the beams with thicker adhesive. A realistic concept of ductility for plate-strengthened beams is proposed in this study. It is seen that the strengthened beams show relatively low ductility compared with unstrengthened beams. The present study indicates that the strengthened beams exhibit much higher fatigue resistance than the unstrengthened beams. The increase of deflections of strengthened beams according to the number of load cycles is much smaller than that of unstrengthened beams. The present study provides very useful results for the realistic application of plate-strengthening method in reinforced concrete structures.

• 한국의학물리학회지:의학물리
• /
• 제13권3호
• /
• pp.129-134
• /
• 2002

방사선 수술시 예상되는 치료효과를 위해 종양에 미리 정의된 방사선량이 조사되도록 수술을 계획한다. 이러한 수술계획시 다양한 모양의 종양에 대해 수술 계획을 수행하는 것은 많은 시간과 숙련된 수술계획자가 요구된다. 최근 들어, 뛰어난 컴퓨터 기술의 발달로 컴퓨터를 이용한 수술계획 방법들이 많이 연구 발표되고 있으나 현재 대부분의 수술계획은 주로 시행착오를 통한 방법으로 이루어진다. 본 연구에서는 방사선 수술계획시 고려되는 많은 빔관련 변수들을 고려하고 다양한 형태의 종양들을 원통형으로 가정한 후 이 종양모델을 50％ 등선량 곡선내에 포함시킬수 있는 변수들을 찾아 이들을 비교 분석하였다. 수많은 변수들 중 본 연구에서 고려한 변수는 콜리메이터 크기, isocenter의 개수와 isocenter 간의 거리이고 이때 얻어진 선량분포는 Dose Volume Histogram(DVH)과 Dose Profile로 서로 비교하였다. 비교결과 우리가 가정한 50％ 등선량 곡선내에 종양모델을 포함시키기 위해서는 일정 개수 이상의 isocenter의 사용은 치료의 복잡성만을 증가시킬뿐 Dose Profile과 DVH에서의 변화는 눈에 뛰게 향상되지 않았다. 또한 같은 콜리메이터 크기로 같은 개수의 isoceter를 사용할 때 isocenter의 거리가 지름대비 1.0-1.2일 경우의 DVH와 Dose profile이 상대적으로 우수하게 나타났다.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.71-77
• /
• 2010

This paper presents the results of a study on flexural capacity of large size RC slabs strengthened with carbon fiber reinforced polymer(CFRP) plates. A total of 5 specimens of 6.0m length were tested in four point bending after strengthening them with externally bonded CFRP plates. The CFRP plates were bonded without prestress and with two prestress levels, 0.4% and 0.6% of CFRP plate strain. Test variables included the type of strengthening, prestressing level, and the effects according to each test variables are analysed. The experimental results show that proposed methods can increase significantly the flexural capacity such as strength, stiffness of the beam and the increase ranged between 36.2% and 63.2% of the load-carrying capacity of the control beams. The non-prestressed specimen failed by separation of the plate from the beam due to premature debonding while most of the prestressed specimens failed by CFRP plate fracture. And the cracking loads and maximum loads were increased proportionally to the prestress level.

• 대한기계학회논문집B
• /
• 제29권5호
• /
• pp.625-632
• /
• 2005

This paper describes the shape optimization of a stator blade in a single-stage transonic axial compressor. The blade optimization has been performed using response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the stator blade, which are used to define a stacking line, are introduced to increase an adiabatic efficiency. Data points for response evaluations have been selected by D-optimal design, and linear programming method has been used for an optimization on a response surface. Throughout the shape optimization of a stator blade, the adiabatic efficiency is increased to 5.8 percent compared to that of the reference shape of the stator. The increase of the efficiency is mainly caused by the pressure enhancement in the stator blade. Flow separation on the blade suction surface of the stator is also improved by optimizing the stator blade. It is noted that the optimization of the stator blade is also useful method to increase the adiabatic efficiency in the axial compressor as well as the optimization of a rotor blade, which is widely used now.

• 노동경제논집
• /
• 제30권3호
• /
• pp.43-75
• /
• 2007

본 연구는 한국노동패널을 사용하여 2002~2005년 3년 동안 직장이직률 추세와 이에 영향을 주는 여러 요인들 가운데 노동조합의 역할을 중심으로 실증분석하였다. 기초통계량에 있어서는 노동조합에 가입된 근로자의 직장 유지율이 노조에 가입되어 있지 않은 근로자보다 평균 28.3%포인트 높게 나타났으나, 직장이직에 영향을 미치는 개인의 관측되는 변수를 통제한 결과에서는 노동조합이 직장유지율을 11~13%포인트 증가시키는 것으로 추정되었다. 노동조합이 근로자의 고용안정에 미치는 효과를 세부적으로 살펴보기 위하여 Fairlie(2003)가 개발한 비선형분해 방법을 사용하여 분석하였다. 비선형분해(Non-linear decomposition) 방법을 사용하여 노조-비노조 간 직장이 직률의 차이를 근로자의 관측되는 변수에 의해 설명되는 부분과 설명되지 못하는 부분으로 나누어 살펴볼 때 설명되는 부분의 기여도가 67~74%로서 추정되고 설명되지 못하는 부분이 나머지 26~33%를 차지함을 알 수 있다. 이는 노동조합이 조합원들의 고용안정에 기여한 부분 외에도 노조에 가입된 근로자의 직장이직 성향이 노조에 가입되지 않거나 노조가 조직되어 있지 않은 사업장에 종사하는 근로자보다 평균적으로 낮음을 시사한다. 실증분석 결과는 노동조합의 고용안정 효과는 최대 7~9%포인트 경계 안에서 한정됨을 시사한다. 노동조합의 고용안정에 미치는 효과가 이처럼 작은 원인은 기업별 단체교섭구조, 외환위기 이후 기업경쟁의 심화, 기업규모별 노동시장 분절화 등 다양한 원인을 추론해 볼 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.84-91
• /
• 2001

Comparison between performance of a plate fin and that of a modified plate fin is investigated as a function of the position, the non-dimensional width and height of wings as well as the non-dimensional fin length using a two-dimensional separation of variables method. The ratio of the incremental rate of heat loss to that of the area of a modified plate fin is also presented as a function of the height of wings. The modified plate fin is made by attaching the wings to upper and lower sides of a plate fin. One of the results shows that performance of a modified plate fin is more improved as the wings approach left (higher) thermal reservoir.