• Title/Summary/Keyword: self-weighting

Search Result 54, Processing Time 0.019 seconds

A Design Weighting Polynomial Parameter Tuning of a Self Tuning Controller (자기동조 제어기의 설계 하중다항식 계수 조정)

  • 조원철;김병문
    • Journal of the Korean Institute of Telematics and Electronics T
    • /
    • v.35T no.3
    • /
    • pp.87-95
    • /
    • 1998
  • This paper presents the method for the automatic tuning of a design weighting polynomial parameter of a generalized minimum-variance stochastic self tuning controller which adapts to changes in the system parameters with time delays and noises. The self tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing a design weighting polynomial parameters. The proposed self tuning method is simple and effective compared with other existing self tuning methods. The computer simulation results are presented to illustrate the procedure and to show the performance of the control system.

  • PDF

The Comparison of the Adaptive Equalization Performance in MCMA Algorithm by the Weighting Factor (MCMA알고리즘에서 weighting factor에 의한 적응 등화 성능 비교)

  • Lim, Seung-Gag
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.4
    • /
    • pp.137-143
    • /
    • 2010
  • This paper deals with the performance comparison of self adaptive equalizer by the weighting factor of MCMA cost function for the compensate the amplitude and phase distortion which occurs in the communication channel. The MCMA is improves the cost function of present CMA at the output of equalizer for the minimize of error function in the amplitude and phase, the value of weighting factor is used at this time. When the comparison of equalizer performance, we classified to initial state and steady state, then it represents the convergence time and convergence speed and steady state operation of equalizer to the predetermined level, it is determined by the weighting factor. We confirm to the different result to this 2 state by weighting factor values using computer simulation. By using the result of this paper, if we appropriately choose the weighting factor values in the environment of communication channel, it is expected that the high quality digital transmission is possible.

Generalized optimal active control algorithm with weighting matrix configuration, stability and time-delay

  • Cheng, Franklin Y.;Tian, Peter
    • Structural Engineering and Mechanics
    • /
    • v.1 no.1
    • /
    • pp.119-135
    • /
    • 1993
  • The paper presents a generalized optimal active control algorithm for earthquake-resistant structures. The study included the weighting matrix configuration, stability, and time-delays for achieving control effectiveness and optimum solution. The sensitivity of various time-delays in the optimal solution is investigated for which the stability regions are determined. A simplified method for reducing the influence of time-delay on dynamic response is proposed. Numerical examples illustrate that the proposed optimal control algorithm is advantageous over others currently in vogue. Its feedback control law is independent of the time increment, and its weighting matrix can be flexibly selected and adjusted at any time during the operation of the control system. The examples also show that the weighting matrix based on pole placement approach is superior to other weighting matrix configurations for its self-adjustable control effectiveness. Using the time-delay correction method can significantly reduce the influence of time-delays on both structural response and required control force.

Estimation of Deterioration and Weighting Factors in Pipes of Water Supply Systems (상수관로의 노후도 영향인자 및 가중치 산정에 관한 연구)

  • Kim, Eung-Seok;Kim, Joong-Hoon;Lee, Hyun-Dong
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.16 no.6
    • /
    • pp.686-699
    • /
    • 2002
  • The purpose of this study is to estimate deterioration factors and weighting factors in pipe network which each local self-governments takes rehabilitation and replacement work present time. Deterioration factors in pipe network are able to effected of specific province or location related with water supply. Most of water supply pipes are laid under the ground, it is hard to quantify deterioration degree of water system. Moreover, the timing and economic limitation and insufficient information on the spot survey gives a difficulty to look over how old water supply system is. Accordingly, this study collects and analyses five data as the laying environment, visual analysis, analysis of soil contents, analysis of pipe material, and questionary survey data in water pipe of A city. The deterioration factor estimates 14 factors with excavation and experimental analysis and 9 factors without excavation and experimental analysis. Also, the weighting factors are estimated by using the multiple linear regressions and the linear programming. The estimated deterioration factor and weighting results are compared the analysis result of visual, pipe material, and soil contents with the Probabilistic Neural Network Model. Consequently, the model results of estimated 9 factors in this study and 14 factors show the 1-2% difference. The result show that the proposed model could be used to decide the deterioration condition of pipe line with real excavation and experimental analysis.

Design Polynomial Tuning of Multivariable Self Tuning Controllers (다변수 자기동조 제어기의 설계다항식 조정)

  • Cho, Won-Chul;Shim, Tae-Eun
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.11
    • /
    • pp.22-33
    • /
    • 1999
  • This paper presents the method for the automatic tuning of a design weighting polynomial parameters of a generalized minimum-variance stochastic ultivariable self-tuning controller which adapts to changes in the higher order nonminimum phase system parameters with time delays and noises. The self-tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing the design weighting polynomial parameters of the controller. The proposed multivariable self-tuning method is simple and effective compared with pole restriction method. The computer simulation results are presented to adapt the higher order multivariable system with nonminimum phase and with changeable system parameters.

  • PDF

Reduced variance implicit self-tuning a;gorithm with variable time-delays for robot manipulator (로보트 매니풀레이터의 시변 지연 시간을 고려한 분산 감소 임플리시트 자기동조 알고리즘)

  • 이희진;박민용;이상배
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1988.10a
    • /
    • pp.12-15
    • /
    • 1988
  • A controller described in this paper is designed for implicit generalised minimum varience controller with variable time delays in which the weighting polynominals are calculated to reduce the output and control signals variances. This paper is based on the fact that the pole-assigment equation may have multiple solutions if the weighting polynominals are not of minimal order. It is shown that the larger order of the weighting polynominals increment the better is the stochastic behavior of the closed-loop system with variable time delays without changs in the deterministic behavior of the system. Based on this theory, the controller is applied to position control of a three-link manipulater with parameter uncertainty.

  • PDF

A self tuning controller using genetic algorithms (유전 알고리듬을 이용한 자기동조 제어기)

  • 조원철;김병문;이평기
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1997.10a
    • /
    • pp.629-632
    • /
    • 1997
  • This paper presents the design method of controller which is combined Genetic Algorithms with the Generalized minimum variance self tuning controller. It is shown that the controllers adapts to changes in the system parameters with time delays and noises. The self tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing a polynomial parameters. The computer simulation results are presented to illustrate the procedure and to show the performance of the control system.

  • PDF

The robustness of continuous self tuning controller for retarded system

  • Lee, Bongkuk;Huh, Uk Youl
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1991.10b
    • /
    • pp.1930-1933
    • /
    • 1991
  • In this paper, the robustness of self turning controller on the continuous time-delay system is investigated. The polynomial identification method using continuous time exponentially weighted least square algorithm is used for estimating the time.-delay system parameters. The pole-zero and pole placement method are adopted for the control algorithm. On considering the control weighting factor and reliability filter the effect of unmodeled dynamics of the plant are examined by the simulation.

  • PDF

The Robustness of Continuous Implicit Self Tuning Controller (연속치 내재형 자기동조 제어기의 강인성)

  • Lee, Bong-Kuk;Huh, Uk-Youl
    • Proceedings of the KIEE Conference
    • /
    • 1990.07a
    • /
    • pp.496-499
    • /
    • 1990
  • In this paper, the robustness of implict self tunning controller on the continuous time system is investigated. Continuous time exponentially weighted least square algorithm is used for estimating the system parameters. The pole-zero placement method is adapted for the control algorithm. On considering the control weighting factor and realizability filter the effects of unmodeled dynamics of the plant are examined by the simulation.

  • PDF

Priority analysis of NCS based vocational core competency of dental hygienists in Gwangju (광주광역시 치과위생사의 NCS 기반 직업기초능력 우선순위 분석)

  • Hong, Nam-Hee
    • Journal of Korean society of Dental Hygiene
    • /
    • v.16 no.3
    • /
    • pp.337-346
    • /
    • 2016
  • Objectives: This study aims to investigate and analyzed the priority of vocational core competency factors in dental hygienists in Gwangju. Methods: Expert survey was conducted and Analytic Hierarchy Process(AHP) was applied to evaluate the weighting factors. First, we established the vocational core competency defined in NCS as AHP analysis model. The vocational core competency has 10 categories and 34 sub-categories. Secondly, AHP survey was conducted by 195 dental hygienists in Gwangju. Finally, the weights representing relative importance of each factor were calculated by using AHP method. Results: The AHP analysis on 10 categories showed that the weighting of interpersonal skills(0.165) was higher than any other categories while that of numeracy(0.035) was at the bottom, and the analysis on sub-categories revealed that the most important factors in each categories included the teamwork skills(interpersonal skills), problem-solving capability(problem-solving skills), listening skills(communication skills), ethical community(professional ethics), ability to understand business(ability to understand organizational structure), applicable technical skills(technical skills), self-management skills(self-development capability), information processing capabilities(information capacity), ability to manage time(resource management capabilities) and basic math skills(numeracy). Conclusions: The results in this study can be used as basic data for the development of liberal arts curriculum for dental hygiene education.