DOI QR코드

DOI QR Code

Generalized optimal active control algorithm with weighting matrix configuration, stability and time-delay

  • Cheng, Franklin Y. (Intelligent System Center) ;
  • Tian, Peter (Civil Engineering Department, University of Missouri-Rolla)
  • Published : 1993.10.25

Abstract

The paper presents a generalized optimal active control algorithm for earthquake-resistant structures. The study included the weighting matrix configuration, stability, and time-delays for achieving control effectiveness and optimum solution. The sensitivity of various time-delays in the optimal solution is investigated for which the stability regions are determined. A simplified method for reducing the influence of time-delay on dynamic response is proposed. Numerical examples illustrate that the proposed optimal control algorithm is advantageous over others currently in vogue. Its feedback control law is independent of the time increment, and its weighting matrix can be flexibly selected and adjusted at any time during the operation of the control system. The examples also show that the weighting matrix based on pole placement approach is superior to other weighting matrix configurations for its self-adjustable control effectiveness. Using the time-delay correction method can significantly reduce the influence of time-delays on both structural response and required control force.

Keywords

Acknowledgement

Supported by : National Science Foundation

References

  1. Abdel-Rohman, M., Quintana, V., and Leipholz, H.H.E. (1980), "Optimal Control of Civil Engineering Structures," Journal of the Engineering Mechanics Division, ASCE, 106, (EM1), 55-73.
  2. Yang, J.N., Akbarpour, A., and Ghaemmaghami, P. (1985), "Optimal Control Algorithms for Earthquake Excited Structures," Structural Control, H.E.E. Leipholz (eds.), Martinus, Nijhoff, Proc. 2nd International Symposium on Structural Control, University of Waterloo, Canada, 748-761.
  3. Yang, J.N., Akbarpour, A.;Ghaemmaghami, P. (1987), "Instantaneous Optimal Control Laws for Building Structures Under Earthquake Excitations," Technical Report, NCEER-87-0007.
  4. Soong, T.T., et al., (1987), "Experimental Evaluation of Instantaneous Optimal Algorithms for Structural Control," Technical Report, NCEER-87-0002.
  5. Soong, T.T. (1990), Active Structural Control, Longman, London and Wiley, New York.
  6. Cheng, F.Y. and Pantelides, C.P. (1986), "Optimum Seismic Structural Design with Tendon and Mass Damper Controls and Random Process," ASCE Structures Congress, 40-53.
  7. Cheng, F.Y. and Pantelides, C.P. (1986), "Optimization of Structures and Controls under Seismic Loading," Proc. International Conference on Computational Mechanics, Tokyo, 135-140.
  8. Cheng, F.Y. and Pantelides, C.P. (1987), "Optimal Active Control of Wind Structures Using Instantaneous Algorithm," Vibration Control and Active Vibration Suppression, D.J. Inman, and J.C.Simons (eds.), American Society of Mechanical Engineers, 21-28.
  9. Cheng, F.Y. and Pantelides, C.P. (1988), "Algorithm Development for Using Optimal Control in Structural Optimization Subjected to Seismic and Wind Forces," NSF Report, U.S. Department of Commerce, National Technical Information Service, NTIS No. PB90-133471/AS.
  10. Cheng, F.Y., Tian, P. and Suthiwong, S. (1991), "Generalized Optimal Active Control Algorithm of Seismic Structures and Related Soil-Structure Formulations," Computational Mechanics in Structural Engineering, Recent Developments and Future Trends, F.Y. Cheng, and Fu Zizhi (eds.), Elsvier Science Publishers, London and New York 49-62.
  11. Cheng, F.Y. and Tian, P. (1992), "Generalized Optimal Active Control Algorithm for Nonlinear Seismic Structures," Proc. 10th World conference on Earthquake Engineering, Madrid, Spain, 3677-3682.
  12. Citron, S.J. (1969), Elements of Optimal Control, Holt, Rinehart and Winston, Inc.
  13. Chajes, J.J., Yang, C.Y. and Zhang, L. (1992), "Stability of a 47-story Office Building with Active Controls," Proc. Structural Stability Research Council, 237-247.
  14. Ogata, K. (1990), Modern Control Engineering, Second Edition, Prentice-Hall, Englewood Cliffs, NJ.

Cited by

  1. Hybrid Control of Seismic Structures with Optimal Placement of Control Devices vol.11, pp.2, 1998, https://doi.org/10.1061/(ASCE)0893-1321(1998)11:2(52)