• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.184-189
• /
• 2012

This study was investigated the effects of supplementation diets with mulberry leaves powder on pH, TBARS (thiobarbituric acid reactive substance) and VBN (volatile basic nitrogen) heating loss, WHC (water holding capacity), and drip loss of chicken meat. One hundred sixty broiler were fed diets for five weeks containing 0% mulberry leaves powder (Control), 1% mulberry leaves powder (T1), 2% mulberry leaves powder (T2), and 3% mulberry leaves powder (T3). At the end of this experiment, broiler were slaughtered, and stored at $4^{\circ}C$ for 10 d. As storage time increased, all treatment groups resulted in increased pH, TBARS, VBN and drip loss (p<0.05). The TBARS and VBN were significantly decreased by the supplementation of mulberry leaves powder compared to the control (p<0.05). T3 results in much better TBARS and VBN than other treatment groups. Especially, T3 was significantly (p<0.05) more effective in improving self life compared to other treatment groups. Heating loss and drip loss were no significantly different among treatment group. In conclusion, these data indicate that supplementation of 3% mulberry leaves powder were most effective in decreasing TBARS and VBN.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.604-612
• /
• 2012

Self-management plan for GHG (Greenhouse Gas) reduction should be prepared in academic facilities, which occupy a large amount of energy consumption. In this study, a university was chosen as one of the major academic facilities and its energy consuming pattern and GHG emission were analyzed. The results have shown that annual $CO_2$ emission from university buildings was 10,452 ton-$CO_2$ (0.65 ton-$CO_2/m^2$), and dependent upon 78.0% electricity, 20.5% LNG and 1.5% oil, respectively as energy sources. According to more detail analysis by usage of energy consumption, appliances occupies 36.7% followed by gas heating (18.9%), lighting (18.6%), heating with electricity (12.5%), cooling with electricity (10.2%), transportation (1.5%), gas cooling (1.2%) and cooking (0.4%). Furthermore, annual $CO_2$ emissions per unit area and a student by electricity usage were evaluated to 51.30 kg-$CO_2/m^2$ and 981.86 kg-$CO_2$/capita, respectively and those by LNG usage were 14.61 kg-$CO_2/m^2$ and 241.01 kg-$CO_2$/capita.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.42-48
• /
• 2011

In this paper, a passive load-pull using a GaN HEMT (Gallium Nitride High Electron Mobility Transistor) bare-chip in X-band is presented. To obtain operation conditions that characteristic change by self-heating was minimized, pulsed drain bias voltage and pulsed-RF signal is employed. An accuracy impedance matching circuits considered parasitic components such as wire-bonding effect at the boundary of the drain is accomplished through the use of a electro-magnetic simulation and a circuit simulation. The microstrip line length-tunable matching circuit is employed to adjust the impedance. The measured maximum output power and drain efficiency of the pulsed load-pull are 42.46 dBm and 58.7%, respectively, across the 8.5-9.2 GHz band.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.215-225
• /
• 2010

This study had the purpose of presenting a residential environment solution as a desirable educational environment for middle school students to grow soundly and to achieve proper self-realization while providing basic materials to build up a suitable residential environment by comparing and analyzing what relationships exist between different home backgrounds, residential environments and middle school students' social maturity. This research was conducted from Feb. 11, 2008 to Feb. 13, 2008. The subject of this research was 601 students in 3 middle schools located in Gyunggi-do. The data analyzed used the SPSS 11.5 version. The summary of this study's results is as follows. First, in terms of home background, the higher the parents' educational background and social and economic position, the greater the students' social maturity. Second, in terms of home environment, the more spacious the living space, the better the water and sewage system and rest room, the more convenient the air conditioner and kitchen system, the better the lighting, ventilation, soundproofness, insulation, the less the danger in relation to fire, crime, traffic accidents, disaster, the greater the students' social maturity. Third, in terms of the home environment related to the correlation between the residential environment and social maturity, all areas such as housing facilities, housing structural environment and housing safety showed static correlations and proved that the residential environment has an important influence on social maturity. Accordingly, in order to build up an ideal residential environment, we should make efforts to expand and improve better facilities at home considering privacy, lighting, ventilation, soundproofness, heating etc. and remove unsound factors that obstruct students social maturity and build up clean and safe residential environment with good relations with their neighbors.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.4
• /
• pp.7-16
• /
• 2014

Purpose : The purpose of this study was to examine the nurses' needs for the spatial composition of geriatric hospital. Methods : The survey method was used for collecting the data. The subjects were 110 nurses who worked at 6 geriatric hospitals in Busan. They answered the questionnaire by the self-administered method. The questionnaire consisted of items which asked the spatial composition of patient room, bathroom, dining space, resting space, care-givers' room, and garden. Results : 1) The patient room using a bed on ondol floor would be useful. Also, it would be desirable that most patient rooms consisted of 4 or 6 persons per patient room and the others were 1 or 2 persons per room. 2) The bathroom for only patients and the shower room for their families or care-givers are needed in the geriatric hospital. 3) The dining room for patients in each floor would be useful to old patients. In addition to that, the cafeteria for their families or care-givers are needed. 4) The resting space for patients and their families, for the staff, and for care-givers are needed. 5) The personal locker and refrigerator are necessary fixtures in care-givers' room. Also, table, sofa, sink, and shower booth are also needed. 6) On the base of activities of care-givers, the space for preserving, washing, and heating foods are needed. Also, the storage space for personal items and the fitting space are needed. Implications : The results of this study would be the fundamental data for space planning of the geriatric hospital.

• Fashion & Textile Research Journal
• /
• v.18 no.3
• /
• pp.363-373
• /
• 2016

This study aims to develop an all-fabric integrated smart jacket in order to create a temperature-regulating system based on a user experience design. For this research, previous research technologies of a textile switch interface and a temperature-regulating system were utilized and a unifying technology for the all-fabric integrated smart jacket was developed which can provide the appropriate temperature environments to the human body. A self-heating textile was applied at the areas of the back and hood in the final tested jacket, and an embroidery circuit was developed in the form of a rectangle in the back and in both ears of the hood, taking into account the pattern of the jacket part where it was be applied and the embroidery production method. The textile switch interface was designed in a three-layer structure: an embroidery circuit line in a conductive yarn, an interval material, and a conductive sensing material, and it was made to work with the input and output sensors through the multiple input method. After the all-fabric integrated smart jacket was produced according to the pattern, all of the textile band lines for transmission were gathered and connected with a miniature module for controlling temperature and then integrated into the inside of the left chest pocket of the jacket. After the users put on this jacket, they were asked to assess the wearing satisfaction. Most of them reported a very low level of irritation and discomfort and said that the jacket was as comfortable as everyday clothing.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.190-190
• /
• 2011

In South Korea the gross generation and heated effluent of power generation plant was 259 TWh and 4.73 billion tons in 2008. And then the waste heat from power generation was 388 TWh. It shows that the efficiency of thermal power generation plant is about 40%. Therefore to reduce $CO_2$ emission from thermal power generation plant, the energy of this heated effluent must be reused to heat buildings or farm facilities. In South Korea horticultural facilities of about 25% are heated in winter season. Total area of greenhouses which are heated is about 13,000 ha. Total heat amount needed to warm greenhouse of 13,000 ha in winter season is only 3.4% of total waste heat from power generation plant. In this study a heat pump system was designed to reuse the waste heat from power generation. Especially new heat exchanger was developed to recover the thermal energy from waste water and this model considered anti-corrosion against sea water and low cost for economic feasibility. This heat recovery system was installed in mango growing greenhouse around thermal power generation plant in Seogwipo-city, Jeju Special Self-Governing Province. The result of preliminary test shows that the heating cost of about 90% is saved as compared to boiler using tax free light oil as a fuel.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.121-129
• /
• 2012

RF biased inductively coupled plasma (ICP) is widely used in semiconductor and display etch processes which are based on vacuum science. Up to now, researches on how rf-bias power affects have been focused on the controls of dc self-bias voltages. But, effect of RF bias on plasma parameters which give a crucial role in the processing result and device performance has been little studied. In this work, we studied the correlation between the RF bias and plasma parameters and the recent published results were included in this paper. Plasma density was changed with the RF bias power and this variation can be explained by simple global model. As the RF bias was applied to the ICP, increase in the electron temperature from the electron energy distribution was measured indicating electron heating. Plasma density uniformity was enhanced with the RF bias power. This study can be helpful for the control of the optimum discharge condition, as well as the basic understanding for correlation between the RF bias and plasma parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.669-669
• /
• 2013

Hierarchical N doped TiO2 nanostructured catalyst with micro, meso and macro porosity have been synthesized by a facile self-formation route using ammonia and titanium isopropoxide precursor. The samples were calcined in different calcination temperature ranging from $300^{\circ}C$ to $800^{\circ}C$ at slow heating rate ($5^{\circ}C$/min) and designated as NHPT-300 to NHPT-800. $TiO_2$ nanostructured catalyst have been characterized by physico-chemical and spectroscopy methods to explore the structural, electronic and optical properties. UV-Vis diffuse reflectance spectra confirmed the red shift and band gap narrowing due to the doping of N species in TiO2 nanoporous catalyst. Hierarchical macro porosity with fibrous channel patterning was observed (confirmed from FESEM) and well preserved even after calcination at $800^{\circ}C$, indicating the thermal stability. BET results showed that micro and mesoporosity was lost after $500^{\circ}C$ calcination. The photocatalytic activity has been evaluated for methanol oxidation to formaldehyde in visible light. The enhanced photocatalytic activity is attributed to combined synergetic effect of N doping for visible light absorption, micro and mesoporosity for increase of effective surface area and light harvestation, and hierarchical macroporous fibrous structure for multiple reflection and effective charge transfer.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.149-156
• /
• 2013

Men should be able to do whatever they want to and want to safely protected at home which is special domain for them. The disabled live mentally uncomfortable lives at home which should be a place where they should be comfortable and convenient. Renovation projects started in Incheon since 2009 by commencing renovation projects for the disabled by the government and welfare centers. Since the project is a program supported by the government or welfare centers thus priority on renovation was decided and carried out by in-depth interview to decide areas to renovate because of limited budgets. This paper is aimed to propose plans for renovating homes according to priority for renovation for dwellers when renovating homes for the disabled with limited budgets. Renovating home for the disabled can be broadly divided into physical, environmental, esthetic renovations, and physical renovation is a basic renovation for daily lives without restrictions in living and include easy movements, accesses to each rooms and adequacy of movement, easily accesses related with easily accessible distance and height, safety to prevent accidents caused by physical inabilities. Environmental renovation is general supports becoming the base of daily living and include control for controlling lighting, heating, air quality for comfortable environments in living space and pleasantness to maintain bright and pleasant interior with sufficient light. Esthetic renovation includes expression of identity by expressing image of one self and visual effects or spatial consideration for hobbies to enjoy comfortable and rich lives.