• 제목/요약/키워드: self cleaning

검색결과 230건 처리시간 0.028초

자기세정산업용 소재 개발을 위한 O2 플라즈마 처리가 Poly(imide) 필름의 표면 형태 및 특성에 미치는 영향 (Effect of O2 Plasma Treatment on the Surface Morphology and Characteristics of Poly (imide) to Develop Self-cleaning Industrial Materials)

  • 강인숙
    • 한국의류학회지
    • /
    • 제36권10호
    • /
    • pp.1117-1124
    • /
    • 2012
  • This study was a preliminary study to investigate the influence of surface morphology and characteristics on the self-cleaning of substrates. PI film was treated by $O_2$ plasma to modify the surface; in addition, AFM and Fe-SEM were employed to examine the morphological changes induced on a PI film treated by $O_2$ plasma and surface energies calculated from measured contact angles between several solutions and PI film based on the geometric mean and a Lewis acid base method. The surface roughness of PI film treated by $O_2$ plasma increased with the duration of the $O_2$ plasma on PI film due to the increased surface etching. The contact angle of film treated by $O_2$ plasma decreased with the increased treatment time in water and surfactant solution; in addition, the surface energy increased with the increased treatment times largely attributed to the increased portion on the polar surface energy of PI film. The coefficient of the correlation between surface roughness and surface polarity such as contact angle and surface energy was below 0.35; however, it was over 0.99 for the contact angle and surface energy.

Enhanced Hydrophilic Property of TiO2 Thin Film Deposited on Glass Etched with O2 Plasma

  • Kim, Hwa-Min;Seo, Sung Bo;Kim, Dong Young;Bae, Kang;Sohn, Sun Young
    • Transactions on Electrical and Electronic Materials
    • /
    • 제14권3호
    • /
    • pp.152-155
    • /
    • 2013
  • $TiO_2$ films were deposited on glass substrates with and without $O_2$ plasma etching by using the RF-magnetron sputtering method. We focused on the effect of surface structure on the photoinduced hydrophilic properties of $TiO_2$ films, fabricated on different surface conditions according to the presence or absence of the $O_2$ plasma treatment on glass substrates. The wettability and photoinduced hydrophilic properties of the $TiO_2$ films were investigated according to the changes in water contact angles under UV light irradiations with a very low intensity of 0.1 $mW/cm^2$. The photoinduced hydrophilic properties on the $TiO_2$ formed above the plasma treated glass were also superior to those on the $TiO_2$ formed above the bare glass. This enhanced $TiO_2$ film has been used practically for self cleaning and anti-fogging glasses.

Transparent and Superhydrophobic Films Prepared by Polydimethylsiloxane-Coated Silica nanoparticles

  • Park, Eun Ji;Sim, Jong Ki;Jeong, Myung-Geun;Kim, Young Dok;Lim, Dong Chan
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.218-218
    • /
    • 2013
  • We report a simple and cost-effective method to fabricate transparent superhydrophobic surface on various substrates. The surface was fabricated by coating hydrophobic PDMS (polydimethylsiloxane) film on the silica nanoparticle and subsequent fixing of the hydrophobic silica nanoparticles onto substrates. The water contact angle for the prepared surface was determined to be over $150^{\circ}$, whichindicates that the surface is highly repellent to water. The hierarchical structure and roughness of the surface were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Additionally, transparency of the prepared surface was measured with UV-VIS spectrometer. The transmittance of the superhydrophobic surface was ~80%, which is lower than that without PDMS-coated silica by only 5 to 10%. It is also notable that the superhydrophobic surface fully recovers its original transmittance after self-cleaning process. Also the PDMS coating is stable under a wide range of pH conditions, UV radiation and salinity conditions, which is essential for the practical use. Moreover, our fabrication method is applicable in large scale production.

  • PDF

콘크리트 침투성 표면보호재의 자기세정 및 내구특성 (Self Cleaning and Durability of Silicate Impregnant of Concrete)

  • 송훈;추용식;이종규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.433-436
    • /
    • 2008
  • Silicate계 표면보호재는 Sodium silicate 혹은 Lithium 및 Potassium silicate를 주성분으로 하는 수용액이며 탄산화한 부분의 알칼리 부여와 성능저하가 예상되는 부위의 강화 등 콘크리트 성능회복에 주로 이용된다. Silicate계는 콘크리트에의 침투성을 향상시키기 위해 계면활성제나 콘크리트 중의 Calcium hydroxide와의 반응을 개선하기 위한 반응촉진제, 경화제 등이 첨가된다. Sodium silicate계는 습윤 바탕에 적용하며 Lithium silicate계는 건조바탕에 도포하여 양생을 실시하는 것이 일반적이다. 콘크리트 구조물 외관의 손상없이 비교적 간편하게 시공할 수 있으며 미세기공을 완전하게 메우지 않으므로 콘크리트 본래의 호흡성을 손상하지 않는다. 본 연구에서는 콘크리트 침투성 표면보호재로서 가격이나 시공성에서 우수한 Lithium 및 Potassium silicate를 이용하여 부유 오염원 제거를 위한 친수성 표면형성과 상온경화가 가능한 표면보호재를 제조하였으며, 제조된 표면보호재의 탄산화 저항성 및 Cl- 침투저항성, 동결융해 저항성 등의 내구성능에 대해 검토하고자 한다.

  • PDF

유리섬유 막재의 역학적 특성에 관한 시험 (Test on the Mechanical Characteristics of Glass Fiber Membrane)

  • 박강근;윤성기
    • 한국공간구조학회논문집
    • /
    • 제8권2호
    • /
    • pp.55-62
    • /
    • 2008
  • 막 구조는 형태의 다양성, 막의 가벼움과 내구성, 투광성 및 균질성 때문에 현대 건축물에 다용하게 사용되어 새로운 건축세계를 열어가고 있다. 본 논문은 대공간 건축 구조물에 주로 사용되는 유리섬유 막 재료의 역학적 특성에 대한 연구이다. 현재 주로 사용되는 건축용 막 재료의 종류에는 PVC, PVF, PVDF, PTFE, ETFE 막재들이 있다. 본 연구에서는 이러한 건축용 막재료에 대한 역학적 시험 방법을 정립하고, PTFE 코팅 유리섬유 막재에 대한 인장강도, 인열강도 및 반복하중 시험 등을 실시하여 건축용 막 재료의 역학적 특성을 분석하고자 한다.

  • PDF

자기세정을 위한 스퍼터링 TiO2 박막의 산소 표면처리에 따른 특성 (Effects of Oxygen Surface Treatment on the Properties of TiO2 Thin Film for Self-cleaning Application)

  • 김남훈;박용섭
    • 한국전기전자재료학회논문지
    • /
    • 제29권5호
    • /
    • pp.294-297
    • /
    • 2016
  • Titanium oxide ($TiO_2$) thin films were fabricated by unbalanced magnetron (UBM) sputtering. The fabricated $TiO_2$ films were treated by oxygen plasma under various RF powers. We investigated the characteristics of oxygen plasma treatment on the surface, structural, and physical properties of $TiO_2$ films prepared at various plasma treatment RF powers. UBM sputtered $TiO_2$ films exhibited higher contact angle value, smooth surface, and amorphous structure. However, the rms surface roughness $TiO_2$ films were rough, and the contact angle value was decreased with the increase of the plasma treatment RF power Also, the hardness value of $TiO_2$ film as physical properties was slightly increased with the increase of the plasma treatment RF power. In the results, the performance of $TiO_2$ films for self cleaning critically depended on the with the plasma treatment RF power.

졸-겔법에 의한 SiO2-TiO2 박막의 초친수성 (Super Hydrophilic Properties of SiO2-TiO2 Thin Film Prepared by Sol-Gel Method)

  • 박민정;이경석;강종봉;문종수
    • 한국재료학회지
    • /
    • 제17권3호
    • /
    • pp.125-131
    • /
    • 2007
  • [ $TiO_{2}-solution$ ] was aaded in $SiO_{2}-solution$ by various composition. $SiO_{2}-TiO_{2}$ thin films were obtained by the dip-coating method on the $SiO_{2}$ glass substrates, and then heat-treated at various temperature. Nano-size $TiO_{2}$ particles dispersed $SiO_{2}-TiO_{2}$ films showed absorption peak by quantum size effect at short wavelength region $350{\sim}400nm$, which made them good candidates for non-linear optical materials and photo-catalytic materials. The thickness of $SiO_{2}-TiO_{2}$ films were $300{\sim}430nm$. The contact angle of $SiO_{2}-TiO_{2}$ films for water was $5.3{\sim}47.9^{\circ}$, and therefore it is clear that $SiO_{2}-TiO_{2}$ films have super hydrophilic properties and the self-cleaning effects.

광기능성 재료 $TiO_2$ 피막에 의한 STS304강의 방식 (Corrosion Protection of STS304 Steel with Photo-Functional Material $TiO_2$ Coating)

  • 남기우;이승연;안석환;김종순
    • 한국해양공학회지
    • /
    • 제17권3호
    • /
    • pp.52-56
    • /
    • 2003
  • This study investigates the photoelectrochemical behavior of STS304 steel with TiO2 thin films coating, applied by sol-gel mehod, for the purpose of cathodic photoprotection of the steel corrosion. One time TiO2-coated STS304 steel, adapted with two kinds of TiO2 sol solution, has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40 W fluorescent lamp, respectively. That had yielded more negative values than the corrosion potential of the bare metal(-130mv vs.SCE). The bleaching of TCE was confirmed on TiO2-coated STS304 steel under UV-illumination with 20W Black-light. This Study concluded that Ti02-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and a photocatalytic self-cleaning effect.

광촉매 TiO2 함유 ZrO2 박막의 초친수성 (Super Hydrophilic Properties of ZrO2 Thin Film Containing TiO2 Photo-Catalysis)

  • 정기욱;이태규;문종수
    • 한국재료학회지
    • /
    • 제18권4호
    • /
    • pp.211-217
    • /
    • 2008
  • A $ZrO_2$ coating solution containing $ZrO_2$ photo-catalysis, which is transparent in visible light, was prepared by the hydrolysis of alkoxide, and thin films on the $SiO_2$ glass substrate were formed in a dipcoating method. These thin films were heat-treated at temperatures ranging from $250^{\circ}C-800^{\circ}C$ and their characteristics were subjected to thermal analysis, XRD, spectrometry, SEM, EDS, contact angle measurement, and AFM. Tetragonal $ZrO_2$ phase was found in the thin film heat treated at $450^{\circ}C$, and anatase $TiO_2$ phase was detected in the thin film heat-treated at $600^{\circ}C$ and above. The thickness of the films was approximately 300 nm, and the roughness was 0.66 nm. Thus, the film properties are excellent. The films are super hydrophilic with a contact angle of $4.0^{\circ}$; moreover, they have self-cleaning effect due to the photo catalytic property of anatase $TiO_2$.

광기능성 재료 $TiO_2$ 피막에 의한 STS304강의 방식 (Protection of STS304 Steel with Photo-Functional Material $TiO_2$ Coating)

  • 남기우;이승연;안석환;김종순;박인덕
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2002년도 추계학술대회 논문집
    • /
    • pp.307-311
    • /
    • 2002
  • This study was investigated the photoelectrochemical behavior of STS304 steel with $TiO_2$ thin films coating, applied by sol-gel method, for the purpose of cathodic photoprotection of the steel corrosion. One time $TiO_2$-coated STS304 steel adopted two kinds of $TiO_2$ sol solution has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40W fluorescent lamp, respectively. That was more negative than the corrosion potential of the bare metal(-150 mV). The bleaching of TCE was confirmed on $TiO_2$-coated STS304 under UV-illumination with 20 W Black-light. This Study was concluded that $TiO_2$-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and photocatalytic self-cleaning effect.

  • PDF