• 제목/요약/키워드: sediment roughness

검색결과 33건 처리시간 0.026초

Meander Flume Outlet Sediment Scour Analysis of a Boxed Culvert

  • Thu Hien Thi Le;VanChienNguyen;DucHauLe
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.35-35
    • /
    • 2023
  • The main reason for its instability is sediment scouring downstream of hydraulic structures. Both physical and numerical models have been used to investigate the influence of soil properties on scour hole geometry. Nevertheless, no research has been conducted on resistance parameters that affect sedimentation and erosion. In addition, auxiliary structures like wing walls, which are prevalent in many real-world applications, have rarely been studied for their impact on morphology. The hydraulic characteristics of steady flow through a boxed culvert are calibrated using a 3D Computational Fluid Dynamics model compared with experimental data in this study, which shows a good agreement between water depth, velocity, and pressure profiles. Test cases showed that 0.015 m grid cells had the lowest NRMSE and MAE values. It is also possible to quantify sediment scour numerically by testing roughness/d50 ratios (cs) and diversion walls at a meander flume outlet. According to the findings, cs = 2.5 indicates a close agreement between numerical and analytical results of maximum scour depth after the culvert; four types of wing walls influence geometrical deformation of the meander flume outlet, resulting in erosion at the concave bank and deposition at the convex bank; two short headwalls are the most appropriate solution for accounting for small changes in morphology. A numerical model can be used to estimate sediment scour at the meander exit channel of hydraulic structures based on the roughness parameter of soil material and headwall type.

  • PDF

Manning's Roughness Factor in Alluvial Channels

  • Jun, Byong-Ho
    • Korean Journal of Hydrosciences
    • /
    • 제1권
    • /
    • pp.49-60
    • /
    • 1990
  • Manning's roughness factor to flow in sand-bed channels may be divided into the grain roughness factor nd the form roughness factor. The grain roughness factor may be dedermined by using Keulegan's formula. By using available experimental data, it was found there is a unique relationship between the form roughness and the hydraulic radius to sediment particle size ratio for a given value of the Froude number. The form roughness and the bed form may be determined by using this unique relationship. The technique for engineering applications of the results appears to be quite simple.

  • PDF

Sediment Fluxes in Shelf Seas Modelling and Monitoring

  • Prandel, David
    • Journal of the korean society of oceanography
    • /
    • 제37권3호
    • /
    • pp.144-153
    • /
    • 2002
  • This is a review paper, assessing progress reported in a Special Issue (Prandle and Lane, 2000) of Coastal Engineering focusing on simulation of SPM in the North Sea, against issues over a diverse range of shelf seas and their coastal margins. The broad objectives of reproducing the characteristics of sediment fluxes off an open coast and relating these to tidal and wave forcing were achieved. However, accurate computation of these fluxes remains sensitive to largely empirical coefficients used in determining erosion and deposition rates. Bed roughness strongly influences both these coefficients and the associated near-bed current magnitudes (including wave impact thereon). Bed roughness can change significantly over a tidal cycle and dramatically over seasons or in the course of a major event. Accurate simulation of sediment fluxes on a day-to-day basis is constrained by dependency on the initial distribution of mobile sediments. The latter depends on rates and locations of original sources and the time history of preceding events. Remote sensing via aircraft could provide data for assimilation into such models to circumvent these constraints. The approaches described here can be readily applied to other coastal regions to indicate the likely distributions and pathways of known sediment sources. However quantitative simulations will require an associated observational programme. A subsequent stage is to understand the evolving balance between the forecasted sediment movement - the resulting morphological adjustments and thence modifications to the prevailing tidal current and wave regimes.

내성천 유역의 강우-유출-토양침식-유사이송 모의를 위한 분포형 모형의 민감도 분석 및 매개변수 평가 (Sensitivity Analysis and Parameter Evaluation of a Distributed Model for Rainfall-Runoff-Soil Erosion-Sediment Transport Modeling in the Naesung Stream Watershed)

  • 정원준;지운
    • 한국수자원학회논문집
    • /
    • 제47권12호
    • /
    • pp.1121-1134
    • /
    • 2014
  • 유사발생 잠재성 및 토양침식으로 인한 유사발생 위험성이 높은 것으로 평가된 내성천유역을 대상으로 강우-유출-토양침식-유사이송으로 이어지는 유역단위의 분포형 모형을 구축하였으며 유출과 유사농도 모의 결과에 주요한 영향을 미치는 조도계수 및 투수계수의 민감도 분석을 실시하였다. 모의결과, 내성천유역의 토지 피복이 숲인 지역의 조도계수를 0.4에서 0.45로 변경하여 지표수 유출 유속을 감소시킴으로써 향석 지점에서의 유출곡선에 미치는 영향을 분석하였으나 유출수문곡선의 변화에 영향을 미치지 않는 것으로 나타났으며 평균 유사농도 값과 유사농도의 범위에 있어서도 모의 결과가 근소하게 증가하나 유의한 변화는 없는 것으로 나타났다. 투수계수에 대한 민감도 분석 결과, 투수계수 값을 저감 시킬수록 총 유출량 및 첨두 유출량은 점차 증가하는 것으로 나타났다. 유사농도 모의의 경우에도 투수계수를 저감시킬수록 모든 지점에서 평균 유사농도 및 유량에 따른 유사농도 범위가 증가하였으며, 향석 지점의 경우 투수계수를 50% 저감하였을 때 유사 농도 모의 값이 유량-유사량 관계식에 의해 계산된 값과 가장 근사한 것으로 나타났다.

High-Frequency Bistatic Scattering from a Corrugated Sediment Surface

  • Cho, Hong-Sang;La, Hyoung-Sul;Yoon, Kwan-Seob;Na, Jung-Yul;Kim, Bong-Chae
    • The Journal of the Acoustical Society of Korea
    • /
    • 제25권2E호
    • /
    • pp.60-68
    • /
    • 2006
  • High-frequency bistatic scattering measurements from a corrugated surface were made in an acoustic water tank. First the azimuthal scattering pattern was measured from an artificially corrugated surface which has varying impedance. The corrugated surface was installed both transverse to the direction of incident wave and longitudinal to the direction of incident wave. The angle between the corrugated surface and the direction of the incident wave was about $45^{\circ}$. Second, the scattering strengths were measured from the flat sediment and the corrugated sediment. A critical angle of about $37^{\circ}$ was calculated in the acoustic water tank. The measurements were made at three fixed grazing angles: $33^{\circ}$ (lower than critical angle), $37^{\circ}$ (critical angle), and $41^{\circ}$ (higher than critical angle). The scattering angle and the grazing angle are equal in each measurement. Frequencies were from 50 kHz to 100 kHz with an increment of 1 kHz. The corrugated sediment was made transverse to the direction of the incident wave. The first measurement indicates that the scattering patterns depend on the relations between the corrugated surface and the direction of the incident wave. In the second measurement, the data measured from the flat sediment were compared to the APL-UW model and to the NRL model. The NRL model's output shows more favorable comparisons than the APL-UW model. In case of the corrugated sediment, the model and the measured data are different because the models used an isotropic wave spectrum of sediment roughness in the scattering calculations. The isotropic wave spectrum consists of $w_2$ and ${\gamma}_2$. These constants derived from sediment names or bulk size. The model which used the constants didn't consider the effect of a corrugated surface. In order to consider a corrugated surface, the constants were varied in the APL-UW model.

압력 원형관로내 유사이송특성 연구 (Sediment Transport Characteristics in a Pressure Pipeline)

  • 손광익;김현정
    • 대한토목학회논문집
    • /
    • 제31권3B호
    • /
    • pp.205-209
    • /
    • 2011
  • 배수관로 내의 토사퇴적으로 인한 통수능 저하는 도시홍수의 주요 발생 원인으로 배수관로의 효율적 유지관리는 도시홍수 예방에 대단히 중요하다. 따라서 본 연구에서는 만관 원형관로에서의 토사이송 실험을 실시하고 배수관로 내에서 일어나는 유사이송 형태, 흐름의 저항 및 유사량 등 수리학적 특성을 분석함으로써 관로의 효율적 유지관리를 위한 기초 자료를 제시 하였다. 본 실험은 길이 8 m, 관경 60 mm의 수평 관로와 유사 공급장치로 구성된 모형장치을 통하여 실내실험을 수행하였다. 실험장치는 최대 $30m^3/hr$ 규모의 유량 순환시스템을 갖추고 있으며 관로 상류부에 5 g/s~19 g/s 규모의 유사 공급 장치와 함께 관로 끝부분에 유사 회수시스템을 갖추고 있다. 본 연구 수행 결과 통수단면의 평균유속(U), 점성계수(${\mu}$), 단위 폭당 소류사량($q_b$), 평균입경($d_{50}$), 수중유사단위중량(${\gamma}^{\prime}_s$)를 주요 인자로 하는 두 개의 무차원 변수를 이용하여 압력 원형관로 내 토사이송을 예측하는 공식을 제안하였으며 이들 무차원 변수 간에는 선형 상관관계가 있음을 확인하였다.

유기안료의 첨가가 도공층의 표면특성에 미치는 영향 (Influence of Orgnainc Pigment Addition on Surface Properties of Coating Layer)

  • 정경모;이용규
    • 펄프종이기술
    • /
    • 제36권2호
    • /
    • pp.47-53
    • /
    • 2004
  • In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

수심적분 2차원 유사이동모형에 관계된 인자들의 민감도분석에 관한 연구 (Sensitivity Analysis of Parameters in a Depth Averaged Two-Dimensional Sediment Transport Model)

  • 서상원;윤병만
    • 한국수자원학회논문집
    • /
    • 제31권1호
    • /
    • pp.115-120
    • /
    • 1998
  • 본 논문에서는 수심적분 2차원 모형을 하나 소개하고, 이 모형이 가질 수 있는 오차의 한계를 민감도분석을 통해 제시하였다. 민감도 분석 결과, Manning 조도계수, 혼합계수, 침강속도, 한계전단력 등이 부유사농도에 대해 모형에 미치는 영향은 매우 크게 나타났으며, 조위와 확산계수의 영향은 거의 없는 것으로 나타났다.

  • PDF

A preliminary study on seabed classification using a scientific echosounder

  • FAJARYANTI, Rina;KANG, Myounghee
    • 수산해양기술연구
    • /
    • 제55권1호
    • /
    • pp.39-49
    • /
    • 2019
  • Acoustics are increasingly regarded as a remote-sensing tool that provides the basis for classifying and mapping ocean resources including seabed classification. It has long been understood that details about the character of the seabed (roughness, sediment type, grain-size distribution, porosity, and material density) are embedded in the acoustical echoes from the seabed. This study developed a sophisticated yet easy-to-use technique to discriminate seabed characteristics using a split beam echosounder. Acoustic survey was conducted in Tongyeong waters, South Korea in June 2018, and the verification of acoustic seabed classification was made by the Van Veen grab sampler. The acoustic scattering signals extracted the seabed hardness and roughness components as well as various seabed features. The seabed features were selected using the principal component analysis, and the seabed classification was performed by the K-means clustering. As a result, three seabed types such as sand, mud, and shell were discriminated. This preliminary study presented feasible application of a sounder to classify the seabed substrates. It can be further developed for characterizing marine habitats on a variety of spatial scales and studying the ecological characteristic of fishes near the habitats.

충적하천(沖積河川)의 하상마찰(河床摩擦) 변화(變化)에 대한 조사(調査)·분석(分析) (An Investigation of Changes in Bed Roughness of Selected Alluvial Rivers)

  • 유권규;김형섭;김활곤;우효섭
    • 대한토목학회논문집
    • /
    • 제13권4호
    • /
    • pp.111-121
    • /
    • 1993
  • 본 연구는 충적하천(沖積河川)에서 실측된 자료를 이용하여 한 하천지점에서 유량의 변화에 따른 하상형태의 변화와 그에 따른 하천마찰의 변화를 검토하는 것이다. 본 연구는 다음과 같은 조건의 하천상태에 국한한다: (1) 하폭 100m 내외의 중규모 하천, (2) 하천선형이 직선이고 하천단면의 변화가 적어 하상마찰 이외에 특별한 에너지 손실요인이 없는 하천, (3) 프루우드 수가 0.5 이하인 저수류영역(低水流領域) 하천. 본 연구에서 얻은 주요 결론을 요약하면 다음과 같다: (1) 매닝의 조도계수(粗度係數)는 평탄하상(平坦河床)의 경우 0.02정도에서 사구(砂丘) 형성시 0.05 정도로 2배 이상 증가한다. (2) 충적하천의 조도계수는 Strickler 공식 형태의 고정상 하천에 대한 조도계수 추정방법으로는 얻을 수 없다. (3) 기존의 하천시설기준에 수록된 이동상 하천에서의 조도계수 추정방법은 실제하천에 적용하는데 있어 한계가 있으며, 우리나라 자료를 이용한 구체적인 연구가 요망된다.

  • PDF