• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.76-84
• /
• 2017

This study selected a method which uses high early strength cement as a way to reduce the curing time and curing energy source of concrete secondary products and reviewed the improvement in the initial strength of concrete secondary products setting the target strength of the concrete capable of removing the form to 15MPa and the curing time to 6 hours. As a result of the test, the only specimen which achieved the form removal strength of 15 MPa only through atmospheric curing within the target curing time of 6hours was ACC-100, and the specimens of TRC-100 and TRC-50 satisfied the values of 6 hours and 15MPa through steam curing. However, we could see that it was difficult to secure workability in the case of the specimen of ACC-100 due to its high rapid setting property and a retarder such as anhydrous citric acid was required to be used to improve the workability. When we look into the pattern following changes in the water to binder ratio, while, in the case of stream curing, OPC-100, TRC-100, and TRC-50 were all found to satisfy achievement of the form removal strength within 6hours as the water to binder ratio decreased, in the case of atmospheric curing, TRC-100, and TRC-50 achieved 15MPa within 12hours.

• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.187-193
• /
• 1996

To supply seeds with a good quality as plant materials for herbicide screening and to know whether the germination characteristics could be associated with a differential response to herbicides, germination characteristics and differential responses to herbicides were investigated with 3 species of a genus Setaria ; Yellow foxtail(Setaria glauca P. Beauv, SETGL), Giant foxtail(Setaria faberi Hetrm, SETFA), and Green foxtail(Setaria viridis P. Beauv, SETVI). Degree of dormancy was high in the order of SETGL, SETVI and SETFA. The dormancy of SETGL seed was relatively well removed by room temperature and drying storage, but SETFA and SETVI by low temperature and wetting storage(stratification). For breaking dormancy of SETGL, SETVI and SETFA, it was necessary for being kept under the above storage conditions for at least 2, 4 and 4-5 months, respectively. When the dormancy-breaked seeds were transfered to low temperature($4^{\circ}C$) and drying condition, SETGL showed germination rate of 96% even after 2 month storage. However, SETVI and SETFA showed a decreased germination of 54% and 69%, respectively, with a decreased velocity of germination, indicating that secondary dormancy might be induced. On the other hand, a significant change in germination rate was not observed as the seeds were transfered to room temperature($25^{\circ}C$) and drying condition. The germinability of SETGL seed began to decline from 6th year after storage in room temperature and drying condition. All of 3 species showed relatively high germination rate at alternating temperature of $30^{\circ}C$/$20^{\circ}C$(14hr/10hr) and their germination were not increased by light. All of 3 species exhibited similar responses to cycloxydim, sethoxydim and primisulfuron in greenhouse experiment. In contrast, SETVI and SETFA were relatively susceptible to fenoxapropethyl, SETFA to fluazifop-butyl, SETGL and SETFA to clorimuron-ethyl, and SETGL to EK-2612. The difference in herbicidal response among 3 species was the highest in the treatment of EK-2612. These results suggest that there is no a consistent tendency in responses of 3 species to herbicides which have the same target site. And the relationship between germination characteristics and differential responses to herbicides was not found.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.71-76
• /
• 2014

Master packaging system is a technology combining primary and secondary packaging to preserve the fresh produce in the supply chain. Master packaging system with tailor-designed gas transfer and $CO_2$ absorber of $Ca(OH)_2$ was applied to fresh shiitake mushroom in its supply from farm to retail store. The temperature, humidity and package atmosphere were monitored through the distribution and/or storage until the packages were opened to measure the mushroom quality. Conventional perforated individual packages without secondary master pack were prepared and travelled the same path for comparison purpose. While high temperature history was observed in some initial period of actual practice of the mushroom transportation and storage unexpectedly, the package atmosphere around the produce in the master packaging system was maintained at modified atmosphere consisting of $O_2$ concentration of 0.4 to 4.2% and $CO_2$ concentration of 0.7 to 1.7%, which is known to be beneficial for the mushroom preservation. While curing the mushrooms with precooled drying was effective for quality preservation, positive effect of master packaging system could be apparent for the uncured mushroom. Harmonized combination of curing treatment, master packaging system and temperature management was suggested for the best quality preservation of the fresh shiitake mushroom.

• The Journal of Fisheries Business Administration
• /
• v.22 no.2
• /
• pp.19-51
• /
• 1991

The objectives of the study are to look into the fisheries processing industry, analyze problems the industry has, and develop strategies for the industry to take care of the problems. The study was performed in two different dimensions : industry level and firm level. Nevertheless, the study focused on the following main problem areas raw material, production, technology development, internationalization, and managerial performance. The secondary data were utilized to analyze problems at the industry level, For analyzing the firm level situation, an empirical study by using a mail survey with a questionnaire was accomplished. The main problems found were as follows : First, difficulty in procuring raw material was the most serious and main problem. It was caused, externally, by the announcement of 200 nautical miles by most of fishery abundant countries and, internally, by drying fishery resources in the nation's coastal areas ; Second, the rate of fishery processing has been continuously increased and the degree of the processing has also been sophisticated, which implies the pattern of demand for the fishery has been changing widely and deeply. The industry, however, seemed to be unable to meet the consumers' satisfaction ; Third, with the importance of technology for ensuring the changing demands in the fishery processing industry, there has been little effort in research and development both at industry level and at the firm level ; Next, the industry has mainly involved in exporting in association with internationalization. Not to mention about foreign direct investment, technology transfer was not active ; Finaliy, most of firms were densely located in a few areas. The managerical performance in terms of main financial ratios still needs to be improved. Thus, strategies, which would take care of the repective problems, were developed. At industry level, the strategies were developed by reasoning mostly based on the findings from the literature survey. A scheme for internationalization of the firms was suggested. This was made by extracting the factors which would differentiate the firms' internationalization stages. In order to achieve this analysis, discriminant approach was employed. Despite the utility of the findings, it was mostly emphasized that harmonious efforts among government, the industry supporting institutions such as banks, and firms are needed for the successful operation of the strategies. Also, a list of areas for further study was provided especially in relation to the validity threatening parts of the study.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.501-517
• /
• 2014

Based on a summary of the previous studies on columnar joints, this study presents research strategies and subjects to understand a formation of columnar joints, and its application in South Korea as follows; geometry of colonnade and entablature, formation mechanism and pattern change, surface morphology and internal structure, platy joint at the top and the bottom of columnar joints, crack patterns in drying starch-water slurries, using numerical models and computer graphics on joint formation, scale and geometry concerned with occurrence of volcanic rock, petrological and mineralogical study of the host rock. Additionally, more research is needed, such as deformation of column pattern during the hot state, secondary landform by alteration and weathering on the Earth's surface such as rock stream, tor and tafoni. This study will take an active role in research of columnar joint and the Cenozoic lava flow of South Korea. Results of this study will be useful to the activation of geotourism and geological field study.

• Journal of Marine Bioscience and Biotechnology
• /
• v.12 no.1
• /
• pp.11-19
• /
• 2020

This study aims to review the progress of biotechnological applications of sea cucumber and presents fundamental validation data on a range of methods and applications to determine the most promising fields for future exploitation and application. Sea cucumbers from different regions, subjected to numerous industrially applicable drying methods, were evaluated for their biochemical composition. The study highlights the nutritional excellence of Jeju red sea cucumber, particularly the high amino acid and fatty acid composition of its intestinal organs and the possibility of the industrial utilization of these organs. In addition, an efficient extraction method to extract collagen and chondroitin sulfate from red sea cucumber was established. The extracted collagen and chondroitin sulfate can be used as commercially valid biomaterials. Accordingly, the red sea cucumber was confirmed as a valuable source of raw food material of varied functionality and bioactivity. Upon conducting an analysis of patents thus far relating to the sea cucumber, it was found that the associated technology was limited to some parts of primary and secondary industries. Therefore, there is a clear need for the strategic development of technologies to produce specialized functional products from sea cucumber's raw materials, with a view to promote other related industries.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.400-405
• /
• 2015

Background : As the characterization of medicinal plants is an important aspect of traditional Asian herbal medicine, this study examines the morphological and anatomical characteristics in four fructus form medicinally important plants belonging to the family Apiaceae. Methods and Results : Fruit morphology of four genera was examined using microtome sections and light microscopy. The Anethi Fructus, Anethum graveolens (Siraja) has unique wing-like and membranous lateral ribs that are, approximately $500{\mu}m$ wide. The Coriandri Fructus, Coriandrum sativum (Hoyuja) does not have oil ducts at the dorsal region of the mericarp and differs in the development of the dorsal ribs. The ribs appear upon drying and therefore, consist of primary and secondary ribs. The Foeniculi Fructus, Foeniculum vulgare (Hoehyang) characteristically develops three dominant dorsal ribs and has a strong aromatic fragrance. Finally, the Cnidii Fructus, Torilis japonica (Sasangja) has many oil ducts at the dorsal and carpophores regions and develops many hooked trichomes one the fructus surface. Conclusions : We conclude from this study that each plant has several prominent and distinguishing morphological and anatomical characteristics. Therefore, fruit morphology is very useful for identifying these medicinal plants. In addition, the correct use and herbal name need to be standardized for plants used traditionally in Asian medicine within Korea, China, and Japan.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.3
• /
• pp.287-299
• /
• 1997

Procurement, cutting, cleansing, freezing, freeze-drying, and demineralization of the allogeneic bone must be made under the germ-free stable condition without bacterial and/or viral contamination. Even thought the bone is procured under the germ free condition, we must have confidence on disinfection of all the solutions that come in contact with tissue during the whole procedure. Lots of antibacterial agents have been introduced for chemical sterilization. Recently ethylene oxide gas sterilization or radiation sterilization is frequently selected as a secendary sterilization procedure. The biological and biochemical response of the graft material differs with the type and concentration of the sterilizing agents, and various toxic reactions have been reported due to the graft material itself and the substance released by the chemicals. The authors conducted the Millipore filter test to observe the toxic effect on L929 fibroblasts according to the effect on activity of succinate dehydrogenase, during the secondary sterilization of the demineralized allogeneic bone powder with irradiation or ethylene oxide gas. The result were as follows : 1. Around the copper disk, positive control group, 10mm diameter discoloration was observed. 2. As same as the negative control group, the disk showed no discoloration. 3. The demineralized allogeneic bone which was sterilized with ethylene oxide gas or irradiation showed no cytotoxicity. 4. From this results, it is suggested that treatment with ethylene oxide gas or irradiation should be effective to sterilize the deminineralized allogeneic bone.

• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.5-9
• /
• 2015

Absorption and luminescence characteristics of disperse red-19 (DR-19) and $TiO_2$ composite have been investigated with various poling electric field strengths. Two step synthetic processes were employed to employ the DR-19 to the $TiO_2$ sol-gel. Firstly, urethane bond formation between DR-19 (-OH) and 3-isocyanatopropyl triethoxysilane (ICPTES, -N=C=O) performed (ICPDR) prior incorporation to the $TiO_2$ sol-gel. Secondary, the hydrolysis of the ethoxy group from the ICPTES and condensation reaction between silanol groups from ICPTES and $TiO_2$ sol-gel were performed. The ICPDR and $TiO_2$ sol-gel ($DRTiO_2$) were mixed and stirred for several days. The composite was coated to the ITO coated glass substrate. Corona poling were performed before drying the composite with various electric field strengths. The absorption intensity decreased with the increase of the poling field strength, which resulted in the increase of poling efficiency. The photoluminescence also decreased as the poling field strength increased. There is long luminescence tail for the poled $DRTiO_2$ film compared with unpoled $DRTiO_2$ film. The luminescence long tail indicates that the self-trapped excitons and polarons were generated when the $DRTiO_2$ film was poled with electric field.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.362-367
• /
• 2012

Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of $45^{\circ}C$ is possible.