• Steel and Composite Structures
• /
• v.51 no.2
• /
• pp.153-172
• /
• 2024

Due to the fast development of constructions in recent years, there has been a rapid consumption of fresh water and river sand. In the production of concrete, alternatives such as sea water and sea sand are available. The near surface mounted (NSM) technique is one of the most important methods of strengthening. Aluminum alloy (AA) bars are non-rusting and suitable for usage with sea water and sand concrete (SSC). The goal of this study was to enhance the shear behaviour of SSC-beams strengthened with NSM AA bars. Twenty-four RC beams were cast from fresh water river sand concrete (FRC) and SSC before being tested in four-point flexure. All beams are the same size and have the same internal reinforcement. The major factors are the concrete type (FRC or SSC), the concrete degree (C25 or C50 with compressive strength = 25 and 50 MPa, respectively), the presence of AA bars for strengthening, the direction of AA bar reinforcement (vertical or diagonal), and the AA bar ratio (0, 0.5, 1, 1.25 and 2 %). The beams' failure mechanism, load-displacement response, ultimate capacity, and ductility were investigated. Maximum load and ductility of C25-FRC-specimens with vertical and diagonal AA bar ratios (1%) were 100,174 % and 140, 205.5 % greater, respectively, than a matching control specimen. The ultimate load and ductility of all SSC-beams were 16-28 % and 11.3-87 % greater, respectively, for different AA bar methods than that of FRC-beams. The ultimate load and ductility of C25-SSC-beams vertically strengthened with AA bar ratios were 66.7-172.7 % and 89.6-267.9 % higher than the unstrengthened beam, respectively. When compared to unstrengthened beams, the ultimate load and ductility of C50-SSC-beams vertically reinforced with AA bar ratios rose by 50-120 % and 45.4-336.1 %, respectively. National code proposed formulae were utilized to determine the theoretical load of tested beams and compared to matching experimental results. The predicted theoretical loads were found to be close to the experimental values.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.6
• /
• pp.71-79
• /
• 2012

Sand compaction pile and stone column replacement methods have been commonly used for improving soft ground in the nearshore. Recently, DCM (Deep cement mixing) method, which can harden soft clays by mixing with cement, is more popularly used in such soft ground improvement. Sandy soils also exist in the seashore. Therefore, in this study, the effect of salinity in sea water and curing methods on the strength of cemented sand was evaluated in terms of unconfined compressive strength (UCS). The sand was mixed with five different cement ratios and distilled water or sea water, and then compacted into a cylindrical specimen. They were cured for 3 days under sea water for DCM construction condition and air cured for onshore curing condition. When a specimen was cured under sea water without confinement, it was easily collapsed due to initiation of cracks. When the cement ratio and curing method were the same, the UCS of the specimen without sea water was at maximum 3.5 times higher than those with sea water. The sea water used for mixing sand had more influence on strength reduction than the sea water used for curing. When the cement ratio was the same, the UCS of air-cured specimen was at average 2 times higher than those of water-cured specimen, regardless of water used.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.83-96
• /
• 2012

The origins of beaches at Byeonsan Peninsular, as a pocket type, are classified to a sand barrier type and wave-cut type. The beaches had developed by the deposition of the silt and clay layers on the 10m height from sea level in the inner bay during climax era of postglacial transgression. At that time, some sands had blown toward the inland hills to form aeolian deposits. After postglacial sea-level stabilization, sometimes, there has been the negative budget of beach materials. Recently, beaches have been transformed by human impact such as construction of Saemangeum sea-wall, especially in the Byeonsan and Gosapo beaches being close to the sea-wall. So the speed of tidal currents become slower and comparatively depositoinal activity stronger. And the level of chemical weathering has been higher. In Byeonsan beach, the ratio of coarse sand decreased with higher ratio of finer materials and by beach erosion dissected runnels developed, running parallel to the coastline. In Gosapo beach, supply of suspended materials are increased through the Garyeok drainage gate, the sands tend to be finer.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.157-160
• /
• 2006

Recently, trouble of sand supply is occurred according to exhaustion of natural sand resources. To solve this problem, sea sand and crushed sand are used. But, necessity of water reducing agent because quality of concrete that use sea sand and crushed sand is deteriorated. Therefore in this study was examined on the engineering properties of concrete with kind of fine aggregate and addition ratio of water reducing agents. As a result, compressive strength appeared similar standard regardless of kind of fine aggregate. Compressive strength, durability was similar in decrease of the unit water content by increase of addition ratio of the water reducing agent. Also, drying shrinkage resistivity was improved because the unit water content decreased.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.45-52
• /
• 1999

It is difficult to keep the balance of supply and demand for natural aggregates in recent years, because natural resources have become to be almost exhausted. Crushed stone is already used for coarse aggregate instead of river gravel at present. Now, crushed sand or sea sand should be used for fine aggregate, because natural sand also has been exhausted with a few exceptions around Nakdong River. The sea sand has a lot of problems which are the corrosion of reinforcement bars, the investment of facility for cleansing salt and the cost increase due to the insufficiency of industrial water. Therefore, it is necessary to produce and to utilize the crushed sand very actively, but some material properties which are related to water absorption, strength and chemical durability, prevent from determining the generalized criteria because its rocks make much differences in its physical and chemical characteristics. In this paper, fundamental physical properties of crushed sand, which comes from Daegu Subway construction fields, have been investigated for the usability on basic material of concrete. The optimum replacement ratio and the strength estimation method of crushed sand replacing natural sand also have been presented here through the compressive strength test of ready-mixed concrete cylinders.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.148-151
• /
• 1994

Up to now, sea sand without complete removal of salt is being used in the construction works because there is little satisfactory counterplan for the substitute aggregate. In the case that such sea sand is used in the reinforced concrete, the residual salt gives rise to deterioration phenmenon and iron corrosion, reducing durability of the ferro-concrete structures. The paper, an experimental study on the effect of corrosion protection by tighting concrete used SF and FA, is to investigate general steel bar's corrosion and to develop concrete using sea sand economically after it is analyzed and examinated ratio of the corrosion area affected by the autoclave cycle. As a test results, as for corrosion area ratio, it is very effective to use admixrutes such as SF and FA which decrease corrosion area remarkably with increasing the amounts of admixtures. Accordingly the use of admixtures is advantageous for tightening concrete and has an effect of salt damage prevention and rust protection in concrete used sea sand.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.28-32
• /
• 1998

Two organophosphorous insecticides, Dichlorovos and Chloropyrifos were degraded in the presence of UV irradiation, UV irradiation with $TiO_2$ powder and UV irradiation with sea sand using low pressure mercury lamp. The identification of these compounds was carried out by gas chromatograph with a nitrogen-phosphorous detector, Total Organic Carbon and Ion Chromatograph, respectively. Both dichlorvos and chloropyrifos, UV irradiation with sea sand were more degradable than UV irradiation and UV irradiation with $TiO_2$ powder. The final products were $Cl^-$ in Dichlorvos, $Cl^-$ $SO_4{^{2-}}$ in Chloropyrifos, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.385-391
• /
• 2001

In this study, we will develop the sea surface interpretation system that can aware the target in the bottom of the sea. we will setup the database whose records would be the signal patterns of formation about mud, sand, rock and sea shell achieved by using supersonic. then we will convert analog signal received in fish detector to digital one using A/D converter So we can process and analyze this signal pattern then compare it to the one in our Database at the real time to identify the target in the bottom of the sea. After enough times of experiments from the background of the results that have been achieved from many studies(including a water tank experiment and a field investigation), we can aware the exact information of the sediment and the sand in the sea. By analyzing the first, second and third signal of the supersonic characters reflected from the body of a fish categorized by its family and from the body of shellfish, muddy sand, sand and rocks, We will develop the sea surface decipherment system which abstracts the first signal that shows the target in the bottom of the sea and makes the second and third signals filtering.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.43-56
• /
• 1993

The laboratory tests are performed on how the liquefaction potential of the sea dike structures on the saturated sand or silty sand seabed could be affected due to earthquake before and after construction results are given as follows ; 1. Earthquake damages to sea dike structures consist of lateral deformation, settlement, minor abnormality of the structures and differential settlement of embankments, etc. It is known that severe disasters due to this type of damages are not much documented. Because of its high relative cost of the preventive measures against this type of damages, the designing engineer has much freedom for the play of judgement and ingenuity in the selection of the construction methods, that is, by comparing the cost of the preventive design cost at a design stage to reconstruction cost after minor failure. 2. The factors controlling the liquefaction potential of the hydraulic fill structure are magnitude of earthquake(max. surface velocity), N-value(relative density), gradation, consistency(plastic limit), classification of soil(G & vs), ground water level, compaction method, volumetric shear stress and strain, effective confining stress, and primary consolidation. 3. The probability of liquefaction can be evaluated by the simple method based on SPT and CPT test results or the precise method based on laboratory test results. For sandy or silty sand seabed of the concerned area of this study, it is said that evaluation of liquefaction potential can be done by the one-dimensional analysis using some geotechnical parameters of soil such as Ip, Υt' gradation, N-value, OCR and classification of soils. 4. Based on above mentioned analysis, safety factor of liquefaction potential on the sea bed at the given site is Fs =0.84 when M = 5.23 or amax= 0.12g. With sea dike structures H = 42.5m and 35.5m on the same site Fs= 3.M~2.08 and Fs = 1.74~1.31 are obtained, respectively. local liquefaction can be expected at the toe of the sea dike constructed with hydraulic fill because of lack of constrained effective stress of the area.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.324-325
• /
• 2018

Recently, the supply and demand of aggregate in the Southeast region has been disrupted because supply of sea sand decreased due to discontinuation of collecting the EEZ aggregate in the southern sea. This study analyzed the Trends of Supply and Demand of Aggregate in the Southeastern Region of South Korea in order to find a solution these social problem.