• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2017

Accurate prediction of size, shape and velocity of a bubble rising through a liquid pool is very important for predicting the particulate removal efficiency in pool scrubbing, for designing engineering safety features to prepare for severe accidents in nuclear power plants, and for predicting the emission of fission products from MCCI (molten core-concrete interaction) process during severe accidents. In this review article, previous studies on the determination of the size, shape and rising velocity of a bubble in liquid are reviewed. Various theoretical and parameterization formulas calculating the bubble size, shape and velocity from physical properties of liquid and gas flowrate are compared. Recent studies tend to suggest simple parameterizations that can easily determine the bubble shape and rising velocity without iteration, whereas iteration has to be performed to determine the bubble shape and velocity in old theories. The recent parameterizations show good agreement with measured data obtained from experiments conducted using different liquid materials with very diverse physical properties, proving themselves to be very useful tools for researchers in related fields.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.5
• /
• pp.402-409
• /
• 2009

Sodium bicarbonate ($NaHCO_3$) was used as a reactant for the removal of acid gases from a waste incinerator. The removal efficiencies of HCl and $SO_x$ were tested with a reactant mixing apparatus and a distributor installed at the bag filter inlet. It was shown that the stoichiometric ratio of $NaHCO_3$ to the acid gases which allows a removal of over 90% for both HCl and $SO_2$ was about 1.2. When a reactant mixing apparatus was installed on the duct, the removal efficiencies of HCl and $SO_2$ at the end of the duct were increased by approximately 1.5 and 3 times respectively, compared to when the apparatus was not installed. At the end of the bag filter, the removal efficiencies of the both were as high as 98% with a stoichiometric ratio of 1.35. Installing a reactant mixing apparatus on the duct and a distributor at the entrance of the bag filter and using $NaHCO_3$ as a reactant helped overcome the problem of low removal efficiencies of acid gases by dry scrubbing.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2012

Because the contact time between satellite and ground station is very limited in LEO (Low Earth Orbit) satellite, all telemetry data generated on spacecraft bus are stored in a mass memory and downlinked to the ground together with real time data during the contact time. The mass memory is initialized in the first system initialization phase and the page status of each memory block is generated step by step. After the completion of the system initialization, the telemetry data are continuously stored and the stored data are played back to the ground by command. And the memory scrubbing is periodically performed for correction of single bit error which can be generated on harsh space environment. This paper introduces the mass memory operation method for telemetry processing of LEO satellite. It includes a general mass memory data structure, the methods of mass memory initialization, scrubbing, data storage and downlink, and mass memory management of primary and redundant mass memory.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.48-55
• /
• 2015

IMO to issue some restricted maritime legislation for reducing the adverse environmental impacts arising from such ship exhaust emissions. According to the IMO policy, every ship entering the Baltic SECAs has to equip the gas cleaning scrubber. The discharged waste solution by gas cleaning scrubber contains many types of salts, which to recover some valuable materials before disposal. This study try to achieve valuable salts including AN and AS throughout a few process such as selective organic solvents salting out, low temperature extraction and thermal evaporation. Amongst them, Thermal evaporation with repetition extraction using inorganic solvent was the most optimum to purify the extracted AN. This valuable salt was evaluated by Elemental analysis and Differential scanning calorimetry.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.311-319
• /
• 1999

Membrane separation process is considered as an alternative of conventional water purification system using coagulationㆍsedimentation＋sand filtration. In this study, it was examined that the application possibility of Hollowfiber Microfiltration membrane for water purification process. A $20m^3/day$ scale pilot plant was used for studying the possibility of long-term operation and the stability of water quality under the optimum conditions, 0.03m/h permeate flux, filtration for 10 minutes, pause for 2 minutes(including air-scrubbing for 30 seconds), obtained by lab-scale experiment. As a result, it was proved stability of pilot plant over one year and filtrate quality(Turbidity. SS etc). Therefore, it was proved that membrane separation process using Hollowfiber Microfiltration membrane can be applied for water purification system

• Herbal Formula Science
• /
• v.18 no.2
• /
• pp.77-91
• /
• 2010

The purpose of this study is to expand the prescription usage from internal treatment to external treatment by applying the compatibilities of herbal ingredient for ointment massage therapy. For this, specific cases of usage were investigated in Donguibogam, which is now inscribed on the UNESCO Memory of the World Register, has been not only one of the classics of Korean medical asphere, but has compiled all the contents of the Oriental medical traditions including ointment massage therapy that was completed through different Chinese dynasties, such as Song (宋), Jin(金) and Won(元) by the 17th century. Research results of this study is : 1. Ointment Massage Therapy was used to treat the symptoms of diseases such as ACHI-mun(dental range : 牙齒門), PI-mun(dermal range : 皮門), JECHANG-mun (sore range : 諸瘡門), SO A-mun(pediatrics range : 小兒門). 2. Out of all the manipulations, it is a scrubbing manipulation that used most. 3. Out of all the formulations of ointment massage therapy, it is powder types and ointment types that most representative formulation.

• 보존과학연구
• /
• s.24
• /
• pp.81-98
• /
• 2003

The biodeterioration on Iksan Mireuksaji pagoda has been studied with fucus on application of K201 as a chemical treatment. Total of 39species, including 10 algae, 16 lichens, 6 mosses and 7 unidentified bacteria and fungi, were collected and identified on the surface of the pagoda. Most of them caused serious discoloration on the surface. The effectiveness and stability of K201 was examined by applying it on some part of the pagoda. A mild spraying of solution diluted to half of original reagent was good enough to eliminate all the deteriorating species on the surface. Most of discoloration disappeared after the treatment except the red color caused by iron substance. The effectiveness of the regent was compared with water wash. The stone was first washed with water and the dirt on the surface was scrubbed off from the surface. The initial surface of the stone was clearer in water wash. However, many of the deteriorating species reappear in 4 weeks after water wash. Although spraying of the reagent K201 could noteliminate all the remnant of dead organisms as good as scrubbing the surface, no deteriorating algae or lichen was observed until two month after treatment. Therefore, spraying method with chemicals seems more stable and reliable way to remove the biodeterioration than physical scrubbing of the surface.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.E
• /
• pp.29-38
• /
• 1999

This study identified emission sources and emissions of air pollutants such as volatile organic compounds (VOCs), solvents, and acid gases produced from chemical plants. We collected air samples from various processes, reactors and facilities using VOC detectors and workers' experience. We identified chemical structures and emission concentrations of air pollutants. We analyzed total emissions of air pollutants emitted from the chemical plants. Also, we developed some emission reduction technologies based on chemical types and emission situations of the identified air pollutants. For reduction of air emissions of acid gases, we employed a method improving solubility of pollutants by reducing scrubber operation temperature, increasing surface area for effective contact of gas and liquid, and modifying or changing chemicals used in the acid scrubbers. In order to reduce air emissions of both amines and acid gases, which have had different emission sources each other but treated by one scrubber, we first could separate gas components. And then different control techniques based on components of pollutants were applied to the emission sources. That is, we first applied condensation and then acid scrubbing method using H2SO4 solution for amine treatment. However, we only used an acid scrubbing method using H2O and NaOH solution for acid gas treatment. In order to reduce air emissions of solvents such as dimethylformamide and toluene, we applied condensation and activated carbon adsorption. In order to reduce air emissions of mixture gases containing acid gases and slovents, which could not be separated in the processes, we employed a combination of various air pollution control devices. That is, the mixture gases were passed into the first condenser, the acid scrubber, the second condenser, and the activated carbon adsorption tower in sequence. In addition, for improvement of condensation efficiency of VOCs, we changed the type of the condensers attached in the reactors as a control device modification. Finally, we could successfully reduce air emissions of pollutants produced from various chenmical processes or facilities by use of proper control methods according to the types and specific emission situations of pollutants.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.123-134
• /
• 2002

In order to investigate dental caries and oral health status of Kindergarten children, a study was conducted from 1st December, 2000 to 21st January 2001. The subjects were consisted of 117 toddler and pre-school children who were enrolled in 4 kindergartens in a county of Kangwondo. A structured questionnaire was used for dental health behavior and dental examination was given by dentist for detecting dental caries The result were as follows: 1. As for the oral health behavior, 71.8% of subjects brushed their tooth twice a day, 18.8% of them once a day, 8.5% of them 3 times a day and 0.9% of them do not brushed. 68.6% of children brushed their teeth in the morning and evening, 20.7% of them before go to bed, 7.4%, and 2.5% of them after meal and before brak first. 71.7% of children used combined with scrubbing and vertical method, 28.3% of them used scrubbing method. 61.5% of their mother answered they observed oral status of children regularly. 2. Prevalence rate of dental caries (dft) was 68.4%. The prevalence rate of dft were significantly higher in the old age children, mother's lower educational level. nourishing with breast feeding, using bottle, irregular eating of snacks 3. Mean dft was 2.95 ; decayed and filled teeth was 1.97 and 0.98, respectively. The mean dft were significantly higher in the old age children, mother's lower educational level

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.427-435
• /
• 2011

Objective: The objective of this study was to evaluate a work of building cleaners using the ergonomic methods. Background: Previous studies about cleaning worker describe typical physical demands of this work. They found that the most significant risk factors associated with the physical work of cleaners are static loads and repetitive movements and high output of force. Method: A head of ergonomics estimation was work analysis(define of combined task, work tool, work time and frequency of combined task) and posture analysis of worker. Results: The results showed that combined task of building cleaners was classification sweeping, mopping(wet), mopping(oil), moving barrels/carts, dumping trash bags, scrubbing, arrangement of cleaning tool, arrangement of circumferential, moving of cleaning tool, and waiting. The work time of combined task such as mopping(wet) and scrubbing indicated high ratio. The posture analysis of building cleaners indicated high value in bending of the head, lower arm, and hands. Conclusion: The findings appear to indicate that building cleaner were related to high risk of work-related musculoskeletal disorders. So, building cleaner would be required an interventional strategy, improvement of cleaning tools and working environment. Application: If ergonomics rule can be integrated into existing cleaning tools and work environments, the risk of occupational injuries will be reduced.