• Resources Recycling
• /
• v.22 no.4
• /
• pp.62-69
• /
• 2013

A study on the recovery of lithium and leaching behavior of NCM powder by carbon reduction for NCM-system Li-ion battery scraps was conducted. First of all, the oxide powders of NCM-system with layer structure were decomposed by carbon, lithium was converted to lithium carbonate by carbon reaction at above $600^{\circ}C$. The lithium carbonate powders with 99% purity were manufactured by washing method with water and concentration process for NCM powder after carbon reduction. The reaction yield was approximately 88% at $800^{\circ}C$ by carbon reduction. At this time, leaching efficiency at 2M sulfuric acid concentration was over 99% for cobalt, nickel and manganese.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.22-28
• /
• 2017

In-Bi-Sn alloy sheet has been used as a thermal fusible parts of secondary battery safety system. This study offers a simple process to make In-Bi-Sn alloy fusible parts. The process consists of two procedures, melting and sheeting by tape casting. 62.5 wt%-In 20.0 wt%-Bi 17.5 wt%-Sn (M.P. $92.4^{\circ}C$) alloy sheet obtained by tape casting was used as the thermal fusible sheet of thermal fuse system for mobile telephone. The performance test of the system was carried out in oil bath, and the fusible alloy sheet was melted and cut off at $95^{\circ}C$. This results confirmed the possibility that the alloy sheet obtained by tape casting can be usable as a thermal fusible parts of battery safety system. And this process can be applied as a simple process to recycle the In-Bi-Sn alloy scrap separated from the used thermal fuse system.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.487-496
• /
• 2019

Objective: The purpose of this study was to create soil contamination maps using QGIS (Quantum Geographic Information System) and suggest selection methods for soil pollution sources for preferential investigation in a soil contamination survey. Method: Data from soil contamination surveys over five years in Gyeonggi-do Province, South Korea (2013-2017) were used for making soil contamination maps and analyzing the density of survey points. By analyzing points exceeding the concern level of soil contamination, soil pollutant sources for priority management were identified and selection methods for preferred survey points were suggested through a study of the model area. Results: A soil contamination survey was conducted at 1,478 points over five years, with the largest number of surveys conducted in industrial complex and factory areas. Soil contamination maps for copper, zinc, nickel, lead, arsenic, fluoride, and total petroleum hydrocarbons were made, and most of the survey points were found to be below concern level 1 for soil contamination. The density of the survey points is similar to that of densely populated areas and factory areas. The analysis results of points exceeding the criteria showed that soil pollutant sources for priority management were areas where ore and scrap metals were used and stored, traffic-related facilities areas, industrial complex and factory areas, and areas associated with waste and recycling. According to the study of the model area, the preferred survey points were traffic-related facilities with 15 years or more since their construction and factories with a score of 10 or more for soil contamination risk. Conclusion: Soil contamination surveys should use GIS for even regional distribution of survey points and for the effective selection of preferred survey points. This study may be used as guidelines to select points for a soil contamination survey.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.159-179
• /
• 2006

As the current trend to the main index of the port competitiveness evaluation, the competitiveness index of the port service comes to more important than the part of expense, location and facility. To reform the bottleneck of port has an effect on improving port service competitiveness. Therefore, this study shows the importance of analyzing bottlenecks on logistics to improve port competitiveness. It collected recent questionnaire data which are the subject as the Custom Service, the Chamber of Commerce and Industry, the Trade Association about bottlenecks of port logistics for working out bottlenecks of domestic port logistics and it produced the order of priorities of bottlenecks by multiplying each output priorities and weights of each process in user of Incheon inner-outer port which is focused on container freight by analysis of priority and Analytic Hierarchy Process(AHP). Unlike existing studies, this study has important values. It presents the priority evaluation only focused on the container freight was produced by port users who are categorized into shipping company, terminal operation company and forwarder, car-ferry in Incheon inner-outer port and making a application of logistics process. It means internal and external competitiveness improvement plan can be presented more concretely and detailed than past competitiveness attributes such as location, facility, service and expense. If the analysis of port logistics bottlenecks which was focused on container freight is extended to the part of general cargo and sundries such as haul grain, car, scrap iron, those studies will be able to provide Incheon port users with useful information and a model of analyzing overall bottleneck of logistics in Incheon port.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.21-36
• /
• 2008

High bum-up fuel technology has been developed through a national R&D program, which covers key technology areas such as claddings, $UO_2$ pellets, spacer grids, performance code, and fuel assembly tests. New cladding alloys were developed through alloy designs, tube fabrication, out-of-pile test and in-reactor test. The new Zr-Nb tubes are found to be much better in their corrosion resistance and creep strength than the Zircaloy-4 tube, owing to an optimized composition and heat treatment of the new Zr-Nb alloys. A new fabrication technology for large grain $UO_2$ pellets was developed using various uranium oxide seeds and a micro-doping of Al. The uranium oxide seeds, which were added to $UO_2$ powder, were prepared by oxidizing and heat-treating scrap $UO_2$ pellets. A $UO_2$ pellet containing tungsten channels was fabricated for a thermal conductivity enhancement. For the fuel performance analysis, new high burnup models were developed and implemented in a code. This code was verified by an international database and our own database. The developed spacer grid has two features of contoured contact spring and hybrid mixing vanes. Mechanical and hydraulic tests showed that the spacer grid is superior in its rodsupporting, wear resistance and CHF performance. Finally, fuel assembly test technology was also developed. Facilities for mechanical and thermal hydraulic tests were constructed and are now in operation. Several achievements are to be utilized soon by the Korea Nuclear Fuel and thereby contribute to the economy and safety of PWR fuel in Korea

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.205-213
• /
• 2021

The present study aimed to determine the effect of co-pyrolysis of sawdust biomass and scrap tyre waste employing different blending ratios of sawdust to waste tyre such as 100:0, 75:25, 50:50, 25:75, and 0:100. The thermochemical characterization of feedstocks was carried out by employing the proximate, ultimate analysis, and thermogravimetric (TGA) analyses, calorific values, and scanning electron microscope coupled with energy dispersive x-ray analysis (SEM-EDX) to select the blending ratio having better bioenergy potential amongst the studied ratios. The blending ratio of 25:75 (sawdust to waste tyre) was selected for the co-pyrolysis study in a fixed-bed pyrolysis reactor system based on its solid biofuels properties such as heating value (30.18 MJ/kg), and carbon (71.81 wt%) and volatile matter (63.82 wt%) contents. The pyrolysis temperatures were varied as 500, 600 and 700 ℃ while the other parameters such as heating rate and nitrogen flowrate were maintained at 30 ℃/min and 0.5 L/min respectively. The bio-oil yields as 31.9, 47.1 and 61.2 wt%, bio-char yields as 34.5, 34.2 and 31.4 wt% and gaseous product yields as 33.6, 18.60 and 7.3 wt% at the pyrolysis temperatures of 500, 600 and 700 ℃ respectively were obtained. The blends of sawdust and waste tyres showed the improved energy characteristics which could provide the solution for the beneficial management of sawdust and scrape tyre wastes via co-pyrolysis processing.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.11-22
• /
• 2018

Magnetic separators has been used in the mining and the recycling fields in general, and is still applied in wide variety of fields. It is classified into the equipments for separating coarse ferrous scrap from non-ferrous materials and the equipments for concentrating fine ferromagnetic particles below 3mm. Magnetic separation equipments for concentrating fine materials also falls into two categories of low intensity and high intensity magnetic separators. The former is used for ferromagnetic materials but also paramagnetic materials of high magnetic susceptibility, and the latter for paramagnetic materials of lower magnetic susceptibility. Both low and high intensity magnetic separators could be utilized either dry and wet. Recently, the High gradient magnetic separators(HGMS) used in the range of less than 0.7 tesla has been gradually replaced by the magnetic separator made of rare earth permanent magnets commercialized in the 1980s. In addition, the expansion of nanotechnology in terms of synthetic magnetic materials in the environmental and biological fields is expected to contribute positively to the development of magnetic separation technology.

• Human Ecology Research
• /
• v.57 no.2
• /
• pp.225-241
• /
• 2019

This study develops and validates an objective scale to measure newspaper use at home by elementary school students and parents. We developed a preliminary scale of 59 items through the review of literature on newspaper use and mediation as well as the examination of content validity by education experts. Collected data were analyzed using SPSS 21.0 and AMOS 21.0 programs. A total of 42 items were supported by 703 parents with students in grades 1-6 using exploratory factor analysis. The model included 3 categories and 9 sub-factors: instruction (modeling, restriction, and text instruction), activities (play activity, conversation, online mediation, and scrap activity), and belief (academic achievement and information acquisition). Confirmatory factor analysis confirmed and validated the model fit; in addition, convergent validity, and discriminant validity, and cross validity was confirmed through correlation analysis by gender comparison and grade comparison. We also verified the validity of this scale through correlation analysis based on Yu and Jung (2012)'s newspaper mediation variables and scale in regards to children's motivation for using newspapers. Finally, internal consistency reliability and half reliability were also confirmed. In conclusion, the suitability and stability of home newspaper utilization scale for elementary students (HNUS-E) were confirmed. This scale provides parents and educators with ideas for the development of the children's literacy, cognitive, and affective domains that can be effectively used in research on newspaper use for school-aged children.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.6
• /
• pp.640-646
• /
• 2018

To determine whether there are differences in the food component characteristics of the cultured recessive small-sized abalone Haliotis discus hannai (SA; 30-40 each/kg) and middle-sized abalone (MA; 10-15 each/kg), the proximate compositions, fatty acid and total amino acid compositions of these two species were evaluated. Additionally, extraction methods were performed on the SA to asses the quality characteristics of the resulting. In terms of proximate composition, MA had lower moisture and carbohydrate levels and higher crude protein contents than SA. The total amino acid contents of MA and SA were 15,734.4 and 11,379.1 mg/100 g, respectively, the major amino acids were glutamic acid, aspartic acid, serine, glycine, alanine, leucine, arginine and lysine, and the major fatty acids were 16:0, 18:0, 18:1n-9, 18:1n-7, 20:4n-6, 20:5n-3, and 22:5n-3. The pH levels and total nitrogen and amino nitrogen contents of the hot-water extract (WE) and scrap enzyme hydrolysate (SE) samples from the SA were 6.32 and 6.05, 1.36% and 1.52%, and 342.1 and 403.1 mg/100 g, respectively. The extraction yields and free amino acid contents from SA were 1,317 and 440 mL/kg, and 8,721.1 and 9,070.7 mg/100 g, respectively, and the concentrations of major components were as follows: arginine, glycine, glutamic acid, alanine and lysine. Additionally, the complex extract (WE+SE) was superior to the traditional extract (WE) in terms of extraction yield, amino-nitrogen content, and organoleptic qualities but not odor.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.92-101
• /
• 2021

The status of waste generation and recycling in 32 countries in the European Union (EU), Japan, and the United States was investigated and summarized to encourage overseas market expansion for domestic urban mining industries. Among the 32 EU countries, Germany has the highest amount of material consumption and generates the largest quantity of waste. Minerals such as mine and soil wastes constitute the largest type of waste in the EU. With respect to waste treatment techniques, landfill and recycling are applied to 39% and 38% of the waste, respectively, implying the necessity to promote recycling. Japan's total waste generation declined recently to less than 400 million tons. The largest amount of waste is generated by the manufacturing industries. The proportion of total recycled waste is estimated to be slightly over 50%, but the proportions are greater than 90% for metal scrap and 60% for waste plastics. The amount of waste produced in the United States recently exceeded 265 million tons; 52.1% of the waste is landfilled, while only 25.1% is recycled. Therefore, the recycling industry has to be developed further.