• 제목/요약/키워드: scattering attenuation

검색결과 135건 처리시간 0.03초

한반도 전리층의 변화현상 연구 (A STUDY ON THE KOREAN IONOSPHERIC VARIABILITY)

  • 배석희;최규홍;육재림;김홍익;민경욱
    • Journal of Astronomy and Space Sciences
    • /
    • 제9권1호
    • /
    • pp.52-68
    • /
    • 1992
  • 태양의 활동과 밀접한 관계를 갖고 있는 이온층은 그 상태 변화에 따라서 무선통신 및 위성 통신 등 전파통신에 큰 영향을 주고 있다. 이온층에서의 전파의 산란과 전파 에너지 감쇄, 그리고 전파시간의 지연과 각 또는 위치 오차 등은 각 주파수 대역에 따라 크게 변화하므로 원활한 전파통신을 위해서는 시시각각으로 이온층의 상태변화에 대한 고찰이 필요하다. 본 논문에서는 1985년 1월부터 1989년 10월까지 전파연구소에서 관측된 국내 이온층 자료를 토대로 5년간의 국내 이온층의 상태변화를 고찰하였으며, 그 분석에 의한 이온층의 실제 높이와 Chapman 모델을 이용한 전자 밀도 분포를 계산하였다.

  • PDF

Selenide Glass Optical Fiber Doped with $Pr^{3+}$ for U-Band Optical Amplifier

  • Chung, Woon-Jin;Seo, Hong-Seok;Park, Bong-Je;Ahn, Joon-Tae;Choi, Yong-Gyu
    • ETRI Journal
    • /
    • 제27권4호
    • /
    • pp.411-417
    • /
    • 2005
  • $Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.

  • PDF

X-선 스펙트럼 변조 기술 연구 (X-Ray Spectrum Modulation for Mammography)

  • 김광현;김경락;오창현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
    • /
    • pp.600-603
    • /
    • 2003
  • Energy spectrum modulation of X-ray source in digital mammography has been studied. In this study, we calculated various filtered spectra using the scattering data. Primary spectra were generated by Molybdenum (Mo) and Tungsten (W) targets. The materials of added filters are Molybdenum and Rhodium (Rh) for 40 kVp Mo. primary spectrum, the amounts of photons over whole energy ranges are attenuated to 0.43 with 0.03 mm Mo filter and 0.38 with 0.06 mm Mo filter while the photons of energy ranged from 17 keV to 20 keV. The photons of low energy ranged below 17 keV are considerably attenuated. This effect brings out reducing the scattered radiation and dose to the patient, and enhancing subject contrast in the image. The results show that filtered spectra are not seriously affected by X-ray tube loadability. Because the energy range from 17 keV to 20 keV is directly transmitted although low and high energies are mainly filtered.

  • PDF

On the use of the wave finite element method for passive vibration control of periodic structures

  • Silva, Priscilla B.;Mencik, Jean-Mathieu;Arruda, Jose R.F.
    • Advances in aircraft and spacecraft science
    • /
    • 제3권3호
    • /
    • pp.299-315
    • /
    • 2016
  • In this work, a strategy for passive vibration control of periodic structures is proposed which involves adding a periodic array of simple resonant devices for creating band gaps. It is shown that such band gaps can be generated at low frequencies as opposed to the well known Bragg scattering effects when the wavelengths have to meet the length of the elementary cell of a periodic structure. For computational purposes, the wave finite element (WFE) method is investigated, which provides a straightforward and fast numerical means for identifying band gaps through the analysis of dispersion curves. Also, the WFE method constitutes an efficient and fast numerical means for analyzing the impact of band gaps in the attenuation of the frequency response functions of periodic structures. In order to highlight the relevance of the proposed approach, numerical experiments are carried out on a 1D academic rod and a 3D aircraft fuselage-like structure.

Anomaly detection in particulate matter sensor using hypothesis pruning generative adversarial network

  • Park, YeongHyeon;Park, Won Seok;Kim, Yeong Beom
    • ETRI Journal
    • /
    • 제43권3호
    • /
    • pp.511-523
    • /
    • 2021
  • The World Health Organization provides guidelines for managing the particulate matter (PM) level because a higher PM level represents a threat to human health. To manage the PM level, a procedure for measuring the PM value is first needed. We use a PM sensor that collects the PM level by laser-based light scattering (LLS) method because it is more cost effective than a beta attenuation monitor-based sensor or tapered element oscillating microbalance-based sensor. However, an LLS-based sensor has a higher probability of malfunctioning than the higher cost sensors. In this paper, we regard the overall malfunctioning, including strange value collection or missing collection data as anomalies, and we aim to detect anomalies for the maintenance of PM measuring sensors. We propose a novel architecture for solving the above aim that we call the hypothesis pruning generative adversarial network (HP-GAN). Through comparative experiments, we achieve AUROC and AUPRC values of 0.948 and 0.967, respectively, in the detection of anomalies in LLS-based PM measuring sensors. We conclude that our HP-GAN is a cutting-edge model for anomaly detection.

Classification of ultrasonic signals of thermally aged cast austenitic stainless steel (CASS) using machine learning (ML) models

  • Kim, Jin-Gyum;Jang, Changheui;Kang, Sung-Sik
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1167-1174
    • /
    • 2022
  • Cast austenitic stainless steels (CASSs) are widely used as structural materials in the nuclear industry. The main drawback of CASSs is the reduction in fracture toughness due to long-term exposure to operating environment. Even though ultrasonic non-destructive testing has been conducted in major nuclear components and pipes, the detection of cracks is difficult due to the scattering and attenuation of ultrasonic waves by the coarse grains and the inhomogeneity of CASS materials. In this study, the ultrasonic signals measured in thermally aged CASS were discriminated for the first time with the simple ultrasonic technique (UT) and machine learning (ML) models. Several different ML models, specifically the K-nearest neighbors (KNN), Support Vector Machine (SVM), and Multi-Layer Perceptron (MLP) models, were used to classify the ultrasonic signals as thermal aging condition of CASS specimens. We identified that the ML models can predict the category of ultrasonic signals effectively according to the aging condition.

단일 비산란 그리드 및 다색광 x-선원 기반 위상대조 x-선 영상화 실험 연구 (Experimental Study for Phase-contrast X-ray Imaging Based on a Single Antiscatter Grid and a Polychromatic X-ray Source)

  • 박연옥;조효성;임현우;제의규;박철규;조희문;김규석;김건아;박소영
    • 한국의학물리학회지:의학물리
    • /
    • 제26권4호
    • /
    • pp.215-222
    • /
    • 2015
  • 본 연구에서는 단일 비산란 그리드 및 다색광 x-선원을 이용하여 위상대조 x-선 영상을 용이하게 구현할 수 있는 새로운 방법을 제안한다. 제안된 신기법의 개념 입증을 위해 집속형 선형 그리드(200 lines/inch 선 밀도), 마이크로 초점 x-선관(${\sim}5{\mu}m$ 초점크기), CMOS형 평판형 검출기($48{\mu}m$ 픽셀 크기)로 실험장치를 구성하였으며, 한 번의 x-선 촬영($90kV_p$, 0.1 mAs)으로 감약대조 x-선 영상과 향상된 가시성을 지진 산란 x-선 영상 및 차분 위상대조 x-선 영상을 Fourier변조복원 기법을 적용하여 성공적으로 분리 획득하였다. 더 나아가, 감약대조 x-선 영상과 산란 x-선 영상을 합성함으로써 일반 감약대조 x-선 영상에서는 명확하게 볼 수 없는 샘플의 미세 구조를 보다 선명하게 나타냄을 확인하였다. 본 논문에서 제안한 단일 비산란 그리드 기반 위상대조 x-선 영상화 기법은 실험 구성 및 절차가 단순하고 새로운 대조도에 기반한 산란 및 위상대조 x-선 영상을 동시에 제공하기 때문에 차세대 x-선 영상화 신기법으로 다양한 응용분야에서 용이하게 적용될 수 있을 것으로 전망한다.

초음파 반사 패턴과 주파수 대역 분할 신호처리를 이용한 다층구조인 노내 간극 측정 (Multi-layered Gap Measurement on In-Vessel Cerium Retention Using Ultrasonic Wave Reflective Pattern Analysis and Frequency Diversity Signal Processing)

  • 구길모;심철무;김종환;김상백;김희동;박치승
    • 비파괴검사학회지
    • /
    • 제20권4호
    • /
    • pp.314-321
    • /
    • 2000
  • 모의 원자로내 용융물 냉각 실증 실험 결과 용융물 $Al_2O_3/Fe$ thermite 와 lower head vessel사이에 간극이 발생된다. 간극을 정량적으로 측정하기 위한 기존의 초음파 방법은 구조물의 복잡성과 $2300^{\circ}C$ 에서 용융되는 thermite $Al_2O_3/Fe,\;Al_2O_3$의 영향으로 발생되는 lower head의 열영향부위(HAZ)의 금속학적인 결정입자 크기의 변화로 결정 계면으로부터 발생되는 잡음신호와 초음파 산란, 감쇠, 모드 변환 등이 발생되어 신뢰성이 떨어지고 있다. 간극을 정량적으로 측정하기 위해서 thermite와 lower head 사이에 물이 채워진 형태의 즉 고체, 액체, 고체의 다층구조에서 초음파의 진행 및 반사 형태를 분류 및 분석하였다. 결정립의 잡음을 억제하기 위하여 주파수대역의 확률 처리 방식인 PT(polarity threshold) 알고리즘을 이용하여 약 6dB 신호 대 잡음비의 개선효과를 가져왔다.

  • PDF

해수의 광학적 성질과 해양기초생산 -동열대 대서양 Oligotrophic zone을 중심으로- (Optical Properties of Ocean Water and Marine Primary Production -A Study on the Oligotrophic Zone in the Eastern Tropical Atlantic Ocean-)

  • 윤홍주;류청로;김기태;김현주
    • 한국수산과학회지
    • /
    • 제28권2호
    • /
    • pp.174-182
    • /
    • 1995
  • Using the optical data from the EUMELI 3 and 4 missions, the optical properties are discussed in relation to primary production in the oligotrophic zone of the Eastern Atlantic Ocean. The depth of euphotic layer $(Z_{eu})$, the total accumulated concentration of pigment $(C_{TOT})$ and the concentration of pigment (C) are 88m, $12.4mgm^{-2}\;and\;0.14mgm^{-3}$, respectively for the EUMELI 3 mission and 101.7m, $10.0mgm^{-2}\;and\;0.10mgm^{-3}$, respectively for the EUMELI 4 mission. The concentration of pigment is higher in autumn (EUMELI 3) than in spring (EUMELI 4). This indicates that the concentration of photosynthetic pigment has a close correlation with vertical attenuation coefficient $(K(\lambda))$ that changes seasonally in the euphotic layer. While the spectral distributions of downward Irradiance$(E_d)$ for the wave length of 470nm increase with depth, those of upward irradiance $(E_u)$ for the wave length range between 410nm and 490nm are constant, because the study area is covered with the blue and clear oceanic deep waters. The vertical attenuation coefficients of downward irradiance $(K_d)$ and upward irradiance $(K_u)$ have low values between 0.02 and $0.06m^{-1}$ due to the low absorption and scattering by the photosynthetic pigment of phytoplankton. Therefore this zone has the characteristics of the case 1 waters with low concentrations of photosynthetic pigment, and can be classifed into IB.

  • PDF

최소극 문턱치 알고리즘을 이용한 고감쇠 용접부에서 초음파 검사방법에 관한 연구 (A Study on the Ultrasonic Inspection Method in High Attenuation Welds using Minimization-Polarity Threshold Algorithm)

  • 구길모;박치승;최종호;고덕영
    • 대한전자공학회논문지TE
    • /
    • 제37권3호
    • /
    • pp.30-36
    • /
    • 2000
  • 본 논문에서는 결함신호의 신호 대 잡음비를 높이기 위해 최소진복선택 알고리즘과 극 문턱치(PT : polarity threshold) 알고리즘을 결합한 최소극 문턱치(MPO : minimum polarity threshold) 알고리즘을 이용한 원전 고감쇠 용접부 초음파 검사방법을 제안하였다. 제안된 알고리즘의 유용성을 확인하기 위한 실험에서는 ASME Xl 코드에 준하는 원전의 실제 모재와 동일한 용접방법으로 제작된 대비 시험편과 4종류의 개선된 탐촉자를 이용하였다. 실험 결과, SE(safeend)와 CCSS(centrifugal casting stainless steel) 재료는 조직의 구조적 특성 때문에 산란신호가 발생하고, 용접 내부에서는 높은 감쇠 현상이 발생하여 정확한 결합검출 능력이 저하되며, 이러한 결함신호에 최소극 문턱치 알고리즘을 적용하면 신호 대 잡음비가 2.6배 개선됨을 확인하였다.

  • PDF