• Korean Journal of Veterinary Research
• /
• v.24 no.2
• /
• pp.227-236
• /
• 1984

A migratory bird, the white stork, Ciconia boyciana was captured from a pond in the Cheju Island on the 18th of December in 1982. The morphological characteristics were described as seen in the binocular stereoscopic microscope and the further fine structures were observed by means of the scanning electron microscope (Model; ISI-DS-130). The bird was examined for the ectoparasites at the Cheju Provincial Veterinary Research Laboratory. Two kinds of specimens were collected from the head and body feathers. The specimens were sent to the Institute of Veterinary Research in Anyang for the classification and identification. The specimens preserved in 70% ethyl alcohol were examined and identified as the fowl head-louse, Cuclotogaster heterographus and the slender goose-louse, Anaticola anseris both classified into Family Philopteridae, Ischnocera, Order Mallophaga.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.453-460
• /
• 1997

The tissue types of stromata were observed intensively in four species of Hypoxylon under a scanning electron microscope (SEM). These stromata were sectioned with a freezing fracture method for observation. Several tissue types were recognized and stable in each species. This study presents the most intensive observation of tissue types of each layer of stromata. It will be useful for taxonomic criteria for the species level. However, the tissue types can not be major taxonomical criteria for the genus Hypoxylon.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.1
• /
• pp.94-109
• /
• 2004

Statement of problem : Several domestic dental implants have been developed since dental treatment being implants are increasing and popularized. However, they have not been used in domestic market like imported goods. Material and methods : This study was carried out to compare domestic and imported implants in aspect of fitness, dental implant fixture and abutment screw using scanning electron microscope. All experiments were performed under dry condition. Results : 1. Only in aspect of relation of dental implant fkxture and abutment screw, except only one group with point contact, good fitness was existed. 2. Home products must presevere in their efforts, so as excellent to fit.

• The Korean Journal of Zoology
• /
• v.27 no.4
• /
• pp.241-254
• /
• 1984

In the present paper, Genus Habronyx Foerster, Genus Habronyx Foerster, Genus Therion Curtis and Genus Heteropelma Wesmael of tribe Theriini were studied by using scanning electron microscope. The authors tried to find out distinct new characters for those genera because tribe Theriini was very similiar to each other. Ten species are recognized, of which Habronyx (Camposcopus) sonani (Uchida), 1958 is newly recorded from Korea.

• Korean journal of applied entomology
• /
• v.30 no.4
• /
• pp.285-290
• /
• 1991

Smithistruma japonica(lto) unrecorded species of Dacetini tribe in Korea was found in Is. Kekumdo, Chonnam Province and named Saw teeth scale ant. The form-characteristics difference between Smithistruma japonica(Ito) and Strumigenys lewisi Cameron was discribed with the result of observation by the scanning electron microscope(SEM). Total species of Dacetini tribe in Korean contained two species in two genus.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.545-546
• /
• 2006

This study was performed to investigate the surface properties of electrochemically oxidized pure titanium by anodic spark discharging method. Commercially pure titanium plates of $10{\times}20{\times}1[mm]$ in dimensions were polished sequentially emery paper. Anodizing was performed at current density of $76.2\;[mA/cm^2]$, application voltage of 290, 350, 400 [V] using a regulated DC power supply, which allowed automatic transition constant current when a preset maximum voltage has been reached. The Ti surface oxided films was characterized by scanning electron microscope(SEM). The precipitation of HA(Hydroxyapatite) crystals on anodized surface was greatly accelerated by hydrothermal treatment. The concentrations of DL-$\alpha$-Glycerolphosphate Magnesiurn(DL-$\alpha$-GP-Mg) salt and Ca acetate in an electrolyte was highly affected the precipitation of HA crystals converted by Ti Anodized oxide films by Shape of Impulse Voltage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.916-921
• /
• 2012

This research measured the dielectric properties of silicone rubber with various hardness in 100 Hz~3 MHz, $30{\sim}170^{\circ}C$ conditions. When the hardness increases from 65 degree to 75 degree, the dielectric loss increased within frequency range of 100 kHz~3 MHz and was a little change in dielectric loss within temperature range of $90^{\circ}C{\sim}170^{\circ}C$. Thermogravimetric Analysis (TGA) showed the weight change rate increased a little while heated until $800^{\circ}C$. Scanning Electron Microscope (SEM) measurement showed that Aluminium Trihydroxide($AlOH_3$) which acts as a reinforcement agent reduced the size of the particles as the hardness increased.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.174-179
• /
• 2014

The wear behavior of epoxy matrix composites filled with nano sized silica particles is discussed in this paper. Especially, the variation of the coefficient of friction and the specific wear rate under the various applied load and sliding velocity were investigated for these materials. Wear tests of pin-on-disc mode were carried out and followed by scanning electron microscope observations. The presence of silica filler in epoxy composites was demonstrated significant influence on the friction and wear behavior of epoxy nanocomposites. With the incorporation of silica filler into the epoxy matrix, reduction of the coefficient of friction and specific wear rate were identified. Wear mechanism was discussed by analyzing the worn surface by scanning electron microscope as well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.428-430
• /
• 2009

C-axis-oriented ZnO thin films were successfully deposited on p-Si (100) in an RF magnetron sputtering system. Deposition conditions such as deposition power, working pressure, and oxygen gas ratio were varied. Crystalline structures of the deposited ZnO films were investigated by a scanning electron microscope (SEM) technique. Results show that the deposition parameters can have a strong impact on the preferred orientations and grain sizes of the deposited ZnO films.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.35-42
• /
• 2003

Polystyrene nanocapsules containing octadecane as a core material were prepared by miniemulsion polymerization. The morphology and size of the nanocapsules were measured with varying the surfactant concentration, content of initiator, core/shell ratio and content of comonomer. The morphologies of the prepared nanoparticles were examined by a scanning electron microscope, a transmission electron microscope and the core material was confirmed by a differential scanning calorimeter. The particles below 70 nm in diameter were formed at a high surfactant concentration. The size of the nanoparticles was not significantly affected by the initiator content. With increasing the core/shell ratio and polar comonomer content, the particle size and its distribution were increased.