Browse > Article
http://dx.doi.org/10.9726/kspse.2014.18.6.174

Friction and Wear of Nano-Sized Silica Filled Epoxy Composites  

Kim, Jae-Dong (Institute of Marine Industry, Gyeongsang National University)
Kim, Yeong-Sik (Department of Mechanical & Automotive Engineering, Pukyong National University)
Kim, Hyung-Jin (Department of Mechanical System Engineering, Gyeongsang National University)
Publication Information
Journal of Power System Engineering / v.18, no.6, 2014 , pp. 174-179 More about this Journal
Abstract
The wear behavior of epoxy matrix composites filled with nano sized silica particles is discussed in this paper. Especially, the variation of the coefficient of friction and the specific wear rate under the various applied load and sliding velocity were investigated for these materials. Wear tests of pin-on-disc mode were carried out and followed by scanning electron microscope observations. The presence of silica filler in epoxy composites was demonstrated significant influence on the friction and wear behavior of epoxy nanocomposites. With the incorporation of silica filler into the epoxy matrix, reduction of the coefficient of friction and specific wear rate were identified. Wear mechanism was discussed by analyzing the worn surface by scanning electron microscope as well.
Keywords
Epoxy; Nanocomposites; Wear Property; Wear mechanism;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Z. Jiang, L. A. Gyurova, A. K. Schlarb, K. Friedrich and Z. Zhang, 2008, "Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles", Composites Science and Technology, Vol. 68, pp. 734-742.   DOI   ScienceOn
2 A. Dasari, Z. Z. Yu and Y. W. Mai, 2009, "Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites", Materials Science and Engineering, Vol. 63, pp.31-80.   DOI   ScienceOn
3 B. N. R. Kumar, B. Suresha and M. Venkataramareddy, 2009, "Effect of particulate fillers on mechanical and abrasive wear behaviour of polyamide 66/polypropylene nanocomposites", Materials and Design, Vol. 30, pp.3852-3858.   DOI   ScienceOn
4 L. Chang, Z. Zhang, L. Ye and K. Friedrich, 2007, "Tribological properties of epoxy nanocomposites III. Characteristics of transfer films", Wear, Vol. 262, pp. 699-706.   DOI   ScienceOn
5 J. D. Kim, H. J. Kim and Y. S. Kim, 2010, "Wear Properties of Epoxy Matrix Nanocomposites", KSPSE, Vol 14(6), pp.83-88.   과학기술학회마을
6 L. C. Zhang, I. Zarudi and K. Q. Xiao, 2006, "Novel behaviour of friction and wear of epoxy composites reinforced by carbon nanotubes", Wear, Vol. 261, pp.806-811.   DOI   ScienceOn
7 B. Wetzel, F. Haupert and M. Q. Zhang, 2003, "Epoxy nanocomposites with high mechanical and tribological performance", Composites Science and Technology, Vol. 63, pp. 2055-2067.   DOI   ScienceOn
8 S. Yu, H. Hu and J. Yin, 2008, "Effect of rubber on tribological behaviors of polyamide 66 under dry and water lubricated sliding", Wear, Vol. 265, pp. 361-366.   DOI   ScienceOn
9 G. Xian, R. Walter and F. Haupert, 2006, "Friction and wear of epoxy/TiO2 nanocomposites: Influence of additional short carbon fibers, Aramid and PTFE particles", Composites Science and Technology, Vol. 66, pp. 3199-3209.   DOI   ScienceOn
10 L. Chang, Z. Zhang, H. Zhang and A. K. Schlarb, 2006, "On the sliding wear of nanoparticle filled polyamide 66 composites", Composites Science and Technology, Vol. 66, pp. 3188-3198.   DOI   ScienceOn
11 J. M. Durand, M. Vardavoulias and M. Jeandin, 1995, "Role of reinforcing ceramic particles in the wear behavior of polymer-based model composites", Wear, Vol. 181, pp. 833-839.
12 G. S. hi, M. Q. Zhang, M. Z. Rong, B. Wetzel and K. Friedrich, 2003, "Friction and wear of low nanometer Si3N4 filled epoxy composites". Wear 2003, Vol.254, pp.784-796.   DOI   ScienceOn