• 터널과지하공간
• /
• 제9권1호
• /
• pp.12-19
• /
• 1999

장약량, 측정거리 등과 같은 발파조건들이 지반진동에 미치는 영향을 조사하기 위하여 골프장 조성공사를 위한 지표발파와 고속도로 건설공사를 위한 터널발파에서 지반진동을 측정하였다. 지표발파에서 삼승근 환산거리방법으로 구한 입지상수 K와 n은 각각 74.1, 01.37로 나타났다. 측정거리가 멀어질수록 Khk n의 절대값은 증가하였다. 지표발파에서 주주파수 대역은 5~60 Hz 이었으며, 그 중에 80% 정도는 10~30 Hz의 범위에 분포하였다. 반면에 터널발파의 주주파수 대역은 25~98Hz로서 지표발파보다 크게나타났다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권2호
• /
• pp.98-107
• /
• 2013

This work describes a 13b 100 MS/s 0.13 um CMOS four-stage pipeline ADC for 3G communication systems. The proposed SHA-free ADC employs a range-scaling technique based on switched-capacitor circuits to properly handle a wide input range of $2V_{P-P}$ using a single on-chip reference of $1V_{P-P}$. The proposed range scaling makes the reference buffers keep a sufficient voltage headroom and doubles the offset tolerance of a latched comparator in the flash ADC1 with a doubled input range. A two-step reference selection technique in the back-end 5b flash ADC reduces both power dissipation and chip area by 50%. The prototype ADC in a 0.13 um CMOS demonstrates the measured differential and integral nonlinearities within 0.57 LSB and 0.99 LSB, respectively. The ADC shows a maximum signal-to-noise-and-distortion ratio of 64.6 dB and a maximum spurious-free dynamic range of 74.0 dB at 100 MS/s, respectively. The ADC with an active die area of 1.2 $mm^2$ consumes 145.6 mW including high-speed reference buffers and 91 mW excluding buffers at 100 MS/s and a 1.3 V supply voltage.

• 한국전자파학회논문지
• /
• 제25권10호
• /
• pp.1062-1068
• /
• 2014

본 논문에서는 두 개의 순차적인 inverse synthetic aperture radar(ISAR) 영상들을 활용하여 표적의 회전 속도(Rotation Velocity: RV) 추정을 통한 수직 거리 스케일링(cross-range scaling: CRS)을 수행한다. 순차적으로 형성된 두 개의 ISAR 영상들에 각각 scale invariant feature transform(SIFT)를 적용함으로써 관측각도의 변화에 강인한 산란원(scatterer)들을 추출한다. 추출된 산란원과 각 영상 내 표적의 회전 중심(Rotation Center: RC) 사이의 거리가 같다는 점을 이용하여 비용함수(cost function)를 설정한 후, 전역 탐색 기법(exhaustive search method)과 결합된 particle swarm optimization(PSO)의 최적화를 통해 표적의 RV를 RC 정보 없이 추정한다. 시뮬레이션에서는 시나리오 기반으로 기동하는 표적에 대한 ISAR 영상 형성 후, 제안된 기법을 통해 RC의 정보 없이 RV를 추정함으로써 ISAR 영상의 CRS가 성공적으로 수행됨을 보여준다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.175-178
• /
• 2004

This paper describes a new IP address lookup algorithm using a binary search on multiple balanced trees stored in one memory. The proposed scheme has 3 different tables; a range table, a main table, and multiple sub-tables. The range table includes $2^8$ entries of 22 bits wide. Each of the main table and sub-table entries is composed of fields for a prefix, a prefix length, the number of sub-table entries, a sub-table pointer, and a forwarding RAM pointer. Binary searches are performed in the main table and the multiple sub-tables in sequence. Address lookups in our proposed scheme are achieved by memory access times of 11 in average, 1 in minimum, and 24 in maximum using 267 Kbytes of memory for 38.000 prefixes. Hence the forwarding table of the proposed scheme is stored into L2 cache, and the address lookup algorithm is implemented in software running on general purpose processor. Since the proposed scheme only depends on the number of prefixes not the length of prefixes, it is easily scaled to IPv6.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1478-1485
• /
• 2000

An experimental study has been performed to investigated the forced convection heat transfer characteristics of 6 circular cylinders in staggered arrangement in a cross flow of air. The water scale deposited on condenser wall of power plant was used to investigate the effect of roughness of scaled surfaces. The relative roughness*average diameter of scale/cylinder diameter) was in a range of k/d=0.0066, 0.0111, 0.0167, 0.0222 and 0.0278. The cylinder spacings(L/d) varies from 1.5 to 4.0 where L denote the cylinder spacings along and normal to the upstream uniform flow direction. The Reynolds number was varied in a range of 10, 000$\leq$ Re $\leq$ 50,000. The local and mean Nusselt numbers were investigated as a function of scale roughness, the cylinder spacing and Reynolds number. The results are compared with those of clean cylinder and inline tube bank, subsequently the mean fouling resistance over the entire circumference was estimated from those results as a function of scale roughness, the cylinder spacing and Reynolds number.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.27-33
• /
• 2008

A micro-impression creep machine was designed and developed, adopting a small punch in diameter of 150 um, displacement gage with an accuracy of sub-${\mu}m$ scale, and load-cell with an accuracy of mN scale in order to investigate creep behavior of small solder ball in diameter of less than 1 mm. Creep behavior of lead-free solder ball(Sn-3.0Ag-0.5Cu) in diameter of $760\;{\mu}m$ was investigated in the stress range of $8{\sim}60\;MPa$ and at $303\;K{\sim}393\;K$. The applied load became decreased slightly and continuously in the creep rate of $10^{-4}/s$ range during the current experiments. Also, the machine frame was so sensitive to the environmental temperature that nm scaled displacement recording was unstable according to the change in environmental temperature.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.200-204
• /
• 2012

This study has presented the analysis of breakdown voltage for a double-gate metal-oxide semiconductor field-effect transistor (MOSFET) based on the doping distribution of the Gaussian function. The double-gate MOSFET is a next generation transistor that shrinks the short channel effects of the nano-scaled CMOSFET. The degradation of breakdown voltage is a highly important short channel effect with threshold voltage roll-off and an increase in subthreshold swings. The analytical potential distribution derived from Poisson's equation and the Fulop's avalanche breakdown condition have been used to calculate the breakdown voltage of a double-gate MOSFET for the shape of the Gaussian doping distribution. This analytical potential model is in good agreement with the numerical model. Using this model, the breakdown voltage has been analyzed for channel length and doping concentration with parameters such as projected range and standard projected deviation of Gaussian function. As a result, since the breakdown voltage is greatly changed for the shape of the Gaussian function, the channel doping distribution of a double-gate MOSFET has to be carefully designed.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.31-36
• /
• 2022

This paper presents the measuring process of dynamic properties of offshore wind power foundation and provides consideration of each step. This Guideline enables to maintain consistent measuring procedure and therefore increase the reliability of test results. Small scaled suction bucket foundation was fabricated to represent the commercial support structure installation mechanism and two cases(free-free, free-fixed) of dynamic tests were performed at workshop. From the tests, the importance of dynamic properties of connection part between suction bucket and tower was figured out. More over, types and configuration of measuring devices are recommended which can help find the natural frequency of wind turbine foundation correctly. In field test, it was found that the natural frequency of suction bucket foundation was increased linearly with the penetration depth due to the confining effect of ambient soil. Meanwhile, it was not easy to get an enough excitation force with normal impact hammer because the N.F of suction bucket model was in the lower range of 0 Hz ~ 5 Hz. Therefore, new excitation method which has enough force and can excite lower frequency range was devised. This study will help develop safety check procedure of suction bucket foundation in field at each installation stage using the N.F measurement.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.824-832
• /
• 2018

According to the government's policy to demonstrate and expand the renewable energy sources, distributed generators such as PV and WP are installed and operated in distribution systems. However, there are many issues related to power quality problems including over voltage and under voltage of customers. In order to overcome these problems, the electric power company have installed a step voltage regulator (SVR) in primary feeders interconnected with distributed generators, and also have established the technical guidelines for the distributed generators to stabilize the customer voltages in distribution systems. However, it is difficult to maintain the customer voltages within allowable limit. Therefore, this paper reviews the problems of voltage control by SVR in a distribution systems interconnected with a large amount of PV systems, and proposes characteristics of operating range and voltage control limit of the small hydropower generators. Also, with the estimation of the influence to the power system voltages from the voltage control mode of generators, this paper proposes the optimal voltage control algorithm of the small hydropower generators. By programming the proposed algorithm into control simulator of exciter, it is confirmed that the proposed algorithm can contribute the voltage stabilization in distribution systems interconnected with large scaled PV systems.

• 대한전자공학회논문지SP
• /
• 제43권1호
• /
• pp.91-100
• /
• 2006

고정 소수점 처리기만큼 낮은 복잡도와 비용으로 넓은 동작 영역의 데이터 처리가 가능한 블록 부동 소수점 체제에서 블록 LMS 알고리즘의 구현을 위한 기법을 제시하였다. 제안 기법은 필터 계수 및 데이터의 표현을 위한 적절한 포맷을 적용하였다. 또한, 시변 mantissa와 시변 exponent를 갖는 스텝 크기에 대해 scaled 표현을 적용하였다. Scaled 표현과 새로운 상한을 이용하여, 필터 계수의 무게 mantissa와 exponent에 대한 업데이트 관계를 개발하였으며, 오버 플로우가 발생하지 않도록 할 뿐만 아니라 이미 직접 곱해진 미소량도 고려하였다. 또한 필터 계수의 mantissa와 필터 출력 역시 고속 블록 LMS 알고리즘 기법의 적절한 수정에 의해 더욱 빠르게 평가할 수 있는 방법을 보였다.