• 한국터널지하공간학회 논문집
• /
• 제14권3호
• /
• pp.277-292
• /
• 2012

본 논문에서는 쉴드 TBM 커터비트의 절삭력 평가를 위한 기초적 연구를 실시하였다. 기존 커터비트 절삭력 분석을 위한 여러 이론식이 존재하지만 기존이론식은 실제 커터비트 절삭력과 차이를 보인다. 따라서 실제 커터비트의 절삭력을 분석하기위하여 축소모형실험을 실시하였으며, 축소모형시험에서 얻은 결과는 기존 이론식과 비교 분석하였다. 이 연구로부터 얻은 결과는 TBM 커터헤드 설계에 있어 기본적으로 매우 필수적인 자료로 활용될 것이라 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.420-422
• /
• 2004

This paper reports the results of performance verification tests of the base isolated RC building with the laminated rubber bearings which is manufactured by Dongil Rubber Belt Co.. The shaking table tests were performed using a scaled 3-story model scaled to 1/3 of the prototype RC apartment building. Several major earthquake records were scaled to different peak ground accelerations and used as input base excitations. Through the verification tests, the validity of the applied base isolation device and the response reduction effect against earthquakes are confirmed.

• 한국터널지하공간학회 논문집
• /
• 제11권3호
• /
• pp.213-221
• /
• 2009

본 논문은 콘크리트 라이닝의 배면공동 현상, 초기 균열 등과 같은 콘크리트 라이닝 타설시 문제점들을 해결하기 위해 개선 방안을 제시하고 이를 단면크기의 변화에 따른 영향을 연구하였다. 연구를 수행하기 위해 초기 균열 형태와 발생 원인에 대한 분석을 실시하였으며 균열발생 최소화를 위한 개선된 타설 방안을 제시하였다. 제시한 타설 방안의 효율성 및 터널 단면크기에 따른 영향을 확인하기 위하여 기존의 1/20 축소모형실험 및 1/7 축소모형실험을 실시하여 타설율을 비교 분석하였다. 이에 따른 실험 결과는 기존의 타설 방안의 경우 1/20 축소모형실험 보다 1/7 축소모형실험의 타설율이 증가하여 차이를 보였지만 개선된 타설 방안의 경우 유사한 타설율을 나타내 2가지 실험 모두 신뢰성을 갖는 것으로 판단된다.

• Wind and Structures
• /
• 제20권6호
• /
• pp.719-737
• /
• 2015

Full scale measurement on the structural dynamic characteristics and Vortex-induced Vibrations (VIV) of a long-span suspension bridge with a central span of 1650 m were conducted. Different Finite Element (FE) modeling principles for the separated twin-box girder were compared and evaluated with the field vibration test results, and the double-spine model was determined to be the best simulation model, but certain modification still needs to be made which will affect the basic modeling parameters and the dynamic response prediction values of corresponding wind tunnel tests. Based on the FE modal analysis results, small-scaled and large-scaled sectional model tests were both carried out to investigate the VIV responses, and probable Reynolds Number effects or scale effect on VIV responses were presented. Based on the observed VIV modes in the field measurement, the VIV results obtained from sectional model tests were converted into those of the three-dimensional (3D) full-scale bridge and subsequently compared with field measurement results. It is indicated that the large-scaled sectional model test can probably provide a reasonable and effective prediction on VIV response.

• 한국지진공학회논문집
• /
• 제1권2호
• /
• pp.39-48
• /
• 1997

지진에 의한 진동이 건물에 미치는 영향을 최소화 하기 위하여 강철 스프링에 천연고무 및 합성고무를 피복 성형한 새로운 형태의 기초분리장치를 개발하고 물성실험을 실시하였으며 모형구조물에 부착하여 진동대실험을 수행하였다. 사용된 모델은 1/4로 축소된 1경간 3층의 철골구조물로 지진 진동을 사용하여 기초분리장치의 수평, 수직방향 안정서와 제진효과를 검증하였다. 얻어진 데이터를 분석한 결과 실험에 사용된 모든 종류의 방진베어링이 지진진동에 의한 가속도를 줄이는데 효과적인 것으로 나타났다.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.51-56
• /
• 2009

The most important advantages of atrium buildings are to allow the abundant natural lighting and outside views. However, the abundant lighting frequently causes to increase a cooling load in summer. The roof watering systems are useful to reduce the cooling load and save the energy. This study aims to investigate the effects of the roof watering system in atrium through the scaled model experiments. For the study, the 1/20 scaled model was made and tests were performed under the clear sky conditions through August 24 to september 7 in 2008. The model size was $45{\times}45{\times}60(cm)$ and depth of roof water was 3(cm). As results, the thermal effects of two types of atrium(roof opening, and roof and front opening,) were evaluated through the experimental points and conditions. It is expected to use the results for the next research to develop the practical roof watering systems for atrium.

• 터널과지하공간
• /
• 제14권1호
• /
• pp.54-68
• /
• 2004

본 연구에서는 경제성장기에 고층 구조물 시공에서 널리 사용된 철근콘크리트(RC, Reinforced Concrete) 구조물을 대상으로 발파해체 축소모형실험을 수행하고 전산실험결과와 이를 비교하였다. 발파해체 공법으로는 파괴거동을 비교적 쉽게 확인할 수 있는 점진붕괴공법을 적용하였으며, 축소모형실험은Hobbs(1969)에 의한 축소율의 개념에 따라 차원해석을 실시하여 축소된 강도특성을 계산하였다. 사용재료로는 석고, 모래, 물의 혼합액을 콘크리트 대용으로 사용하였다. 모래와 석고의 중량 비를 다양하게 변화시키면서 이에 따른 강도의 변화를 측정하고 최적의 강도 값을 갖는 배합 비를 결정하였다. 또한 연성을 가지고 있으며 축소강도로 비교할 때 철근과 유사한 특성을 지니는 땜용 납선을 철근대용 재료로 사용하였다. 수치해석 프로그램으로는 요소의 파괴거동을 육안으로 확인할 수 있는 개별 요소법(DEM Distinct Element Method)에 의해 수행되는 상용코드인 PFC2D(Particle Flow Code 2-Dimension)을 사용하였다. 모형의 제작은 실내에서 미리 양생된 부재들을 현장으로 옮겨 연결부만을 타설하여 일체화시키는 방법으로 이루어졌다. 먼저 3차원 무근 콘크리트 라멘 구조의 모형을 설계하고 그 축소 모형을 발파해체하여 그 거동을 촬영하였다. 이를 수치적인 해석과 비교하는 과정을 통해 2차원 해석이라는 한계성은 존재하지만 대체로 유사한 형태의 거동을 보임을 알 수 있었다. 사전해석의 경험과 RC 보의 실내 굴곡 실험결과를 근거로 하여 RC 구조모형의 발파해체 사전해석을 실시하였다. 시차는 200㎳로 하여 점진적으로 붕괴되도록 설계하였다. 모형실험과는 달리 2차원 해석이라는 한계에도 불구하고 900㎳까지 매우 유사한 거동을 보이며 붕괴되었다.

• Wind and Structures
• /
• 제36권6호
• /
• pp.367-377
• /
• 2023

This study proposes a few-shot learning model for extrapolating the wind pressure of scaled experiments to full-scale measurements. The proposed ML model can use scaled experimental data and a few full-scale tests to accurately predict the remaining full-scale data points (for new specimens). This model focuses on extrapolating the prediction to different scales while existing approaches are not capable of accurately extrapolating from scaled data to full-scale data in the wind engineering domain. Also, the scaling issue observed in wind tunnel tests can be partially resolved via the proposed approach. The proposed model obtained a low mean-squared error and a high coefficient of determination for the mean and standard deviation wind pressure coefficients of the full-scale dataset. A parametric study is carried out to investigate the influence of the number of selected shots. This technique is the first of its kind as it is the first time an ML model has been used in the wind engineering field to deal with extrapolation in wind performance prediction. With the advantages of the few-shot learning model, physical wind tunnel experiments can be reduced to a great extent. The few-shot learning model yields a robust, efficient, and accurate alternative to extrapolating the prediction performance of structures from various model scales to full-scale.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.189-198
• /
• 2008

Lots of roadway tunnel have been almost constructed in forms of closely-spaced tunnel in korea. If closely-spaced tunnel is not constructed at a sufficient distance between tunnels, the problem of stability can occur. However, the case that can not secure a sufficient distance between tunnels can occur due to a difficulty in buying a lot and an issue of popular complaint and environmental disruption. Generally, tunnels are not influenced by each other when a center distance between tunnels is two times longer than tunnel diameter under the complete elastic ground and five times under the soft ground. In this study, the scaled model tests of closely-spaced tunnel by using homogeneous material were performed and induced displacements were measured around the tunnel openings during excavation. The influence of distance between tunnels on the behavior of closely-spaced tunnel was investigated.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.457-470
• /
• 2021

In this study, the pull-out behavior of a tunnel-type anchorage for suspension bridges was investigated using experimental tests and image processing analyses. The study focused on evaluating the initial failure behavior and failure mode of the tunnel-type anchorage. In order to evaluate the failure mode of tunnel-type anchorage, a series of scaled model tests were conducted based on the prototype anchorage of the Ulsan Grand Bridge. In the model tests, the anchorage body and surrounding rocks were fabricated using a gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests demonstrate that the tunnel-type anchorage underwent a wedge-shaped failure. In addition, the failure mode changed according to the differences in the physical properties of the surrounding rock and the anchorage body and the size of the anchor plate. The size of the anchor plate was found to be an important parameter that determines the failure mode. However, the difference in physical properties between the surrounding rock and the anchorage body did not affect its size. In addition, this study analyzed the initial failure behavior of the tunnel-type anchorage through image analysis and confirmed that the failure was sequentially transferred from the inside of the tunnel to the surrounding rock according to the image analysis. The reasonable failure mode for the design of the tunnel-type anchorage should be wedge-type rather than pull-out type.