• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.559-564
• /
• 1998

The film condensation models in RELAP5/MOD3.1 and RELAP5/WOD3.2 are assessed with the data experiment performed in the scaled down condensation experimental facility with a single vertical tube inner diameter 46 mm in the range of pressure 0.1∼7.5 Mpa for the PSCS(Passive Secondary Condenser System) Both MOD3.1 and MOD3.2 don't shows any reliable predictions the experimental data The RELAP5/MOD3.1 overpredicts the heat transfer coefficients experiment, whereas the RELAP5/MOD3.2 underpredicts those data it is recommended that the film condonation model in RELAP5/MOD3.2 should be modified to hue a larger heat transfer coefficient than those the present model to give the reliable predictions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.314-324
• /
• 2020

Due to the nonlinearity and environmental uncertainties, the design of the ship's steering controller is a long-term challenge. The purpose of this study is to design an intelligent autopilot based on Extended Kalman Filter (EKF) trained Radial Basis Function Neural Network (RBFNN) control algorithm. The newly developed free running model scaled surface vessel was employed to execute the motion control experiments. After describing the design of the EKF trained RBFNN autopilot, the performances of the proposed control system were investigated by conducting experiments using the physical model on lake and simulations using the corresponding mathematical model. The results demonstrate that the developed control system is feasible to be used for the ship's motion control in the presences of environmental disturbances. Moreover, in comparison with the Back-Propagation (BP) neural networks and Proportional-Derivative (PD) based control methods, the EKF RBFNN based control method shows better performance regarding course keeping and trajectory tracking.

• 한국철도학회논문집
• /
• 제15권1호
• /
• pp.9-16
• /
• 2012

철도차량의 탈선은 발생 시 대형사고로 이어질 수 있어, 철도차량의 주행안전 확보 문제는 철도운영기관 및 시설기관의 주요 현안 사항이다. 현재 대차의 동적 안정성 특성 시험은 대차 주행시험대라는 시험설비를 이용하여 시험을 하고 있다. 그러나 실물을 대상으로 한 실물규모의 주행시험대상에서의 동특성 시험은 시험 준비와 관련된 시험비용 및 시험소요 시간의 증가, 다양한 시험조건 설정 측면에서 어려움이 있다. 이러한 단점을 극복하고자 시험 편의성 측면에서 축소형 주행시험대를 활용하고 있으나 국내에서는 아직까지 축소대차, 축소트랙 등의 기초적인 수준의 연구가 진행되고 있다. 본 연구에서는 철도차량의 동적 거동을 예측하는 방법으로서 소형탈선시뮬레이터를 이용하여 상사기법이 적용된 1/5 축소대차의 주행안정성 시험에 대한 연구를 수행하였다. 또한, 시험데이터와 해석데이터를 비교·검증하기 위하여 상용해석프로그램을 이용하여 해석모델을 구현하고, 이를 이용하여 도향상에 따른 1/5 축소대차의 동적특성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.414-416
• /
• 2005

This is for investigating the grounding resistance of grounding electrodes, the experiment was performed with model-scale of the grounding system and the scaled model grounding system was to this experiment using a water tank of a stainless steel-hemisphere shape. since mesh electrodes have been widely in the general building, we're tried to analyze that this water tank model and it's simulation as well.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.327-336
• /
• 2007

The influence of density differences on the mixing of the primary loop inventory and the Emergency Core Cooling (ECC) water in the downcomer of a Pressurised Water Reactor (PWR) was analyzed at the ROssendorf COolant Mixing (ROCOM) test facility. ROCOM is a 1:5 scaled model of a German PWR, and has been designed for coolant mixing studies. It is equipped with advanced instrumentation, which delivers high-resolution information for temperature or boron concentration fields. This paper presents a ROCOM experiment in which water with higher density was injected into a cold leg of the reactor model. Wire-mesh sensors measuring the tracer concentration were installed in the cold leg and upper and lower part of the downcomer. The experiment was run with 5% of the design flow rate in one loop and 10% density difference between the ECC and loop water especially for the validation of the Computational Fluid Dynamics (CFD) software ANSYS CFX. A mesh with two million control volumes was used for the calculations. The effects of turbulence on the mean flow were modelled with a Reynolds stress turbulence model. The results of the experiment and of the numerical calculations show that mixing is dominated by buoyancy effects: At higher mass flow rates (close to nominal conditions) the injected slug propagates in the circumferential direction around the core barrel. Buoyancy effects reduce this circumferential propagation. Therefore, density effects play an important role during natural convection with ECC injection in PWRs. ANSYS CFX was able to predict the observed flow patterns and mixing phenomena quite well.

• 한국가시화정보학회지
• /
• 제12권1호
• /
• pp.18-24
• /
• 2014

The Korea Atomic Energy Research Institute (KAERI) has a scaled-down moderator test program to simulate the CANDU6 moderator circulation phenomena during steady state operation and accident conditions. In the present work a preliminary experiment using a 1/8 scaled-down moderator tank has been performed to identify the potential problems of the flow visualization and measurement in the scaled-down moderator test facility. With a transparent moderator tank model, a velocity field is measured with a Particle Image Velocimetry (PIV) technique under an isothermal state. The flow patterns from the inlet nozzles to the top region of the tank are investigated using PIV for a 1/8 scale moderator tank.

• 터널과지하공간
• /
• 제16권1호
• /
• pp.85-94
• /
• 2006

본 연구에서는 장대 터널 화재시 발생되는 역기류를 제압하는 최적의 임계속도를 결정하기 위하여 제연설비를 가동시키는데 소요되는 시간, 피난자들의 대피시간 등에 대한 연구 자료들을 취합, 분석하였고, 이를 토대로 화재 시나리오를 설정하여 축소 모형실험을 실시하였다. 비상 환기시스템 가동시점을 분석한 결과, 화재 발생후 약 240초(약 4분)후 비상 환기시스템이 가동하게 되며, 제연팬 가동 후 4분 이내에 역기류를 제어할 수 있는 임계속도를 확보하는 것이 실제 터널에 적합한 시간 시나리오였다. 화재지점 주변의 역기류 분포를 분석하기위해 Froude 상사이론에 기초한 아크릴 재질의 축소비 1/50의 모형(직경 : 0.2m, 연장 : 20 m)을 제작하였고, Tetzner 식의 보정계수$(\beta)$를 변화시키며 화재지점 주변의 CO농도를 측정한 결과, 보정계수가 0.5인 경우에 피난허용시간 기준에 적합한 제연효과를 나타내었다.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.60-67
• /
• 2010

This paper deals with an experimental study on the wheel flange climbing of railway vehicles, which is a major factor leading to derailment. An experiment is carried out on a 1/5-scale model wheelset of a truck used on a standard-gauge track, which is placed on a roller rig. The lateral external force acting on the wheelset is ramped up until derailment occurs under the condition of a fixed attack angle and wheel-load unbalance ratio. Three parameters, the height of wheel lift, the lateral force, and the wheel load acting on the outer rail, are measured until derailment occurs. From these measurements, it is possible to observe the behavior of the wheelset and to elucidate how the attack angle, the wheel-load unbalance ratio and the lateral external force affect flange-climb derailment. Then, a numerical simulation is carried out using an analytical model based on a single wheelset. As a result, the flange-climb behavior observed in the experiment can be explained theoretically on the bases of the analytical results, although further improvement of the model is desired.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.98-101
• /
• 2006

In general, stereo images are widely used to remote sensing or photogrametric applications for the purpose of image understanding and feature extraction or cognition. However, the most cases of these stereo-based application deal with 2-D satellite images or the airborne photos so that its main targets are generation of small-scaled or large-scaled DEM(Digital Elevation Model) or DSM(Digital Surface Model), in the 2.5-D. Contrast to these previous approaches, the scope of this study is to investigate 3-D stereo processing and visualization of true geo-referenced 3-D features based on anaglyph technique, and the aim is at the prototype development for stereo visualization system of complex typed 3-D GIS features. As for complex typed 3-D features, the various kinds of urban landscape components are taken into account with their geometric characteristics and attributes. The main functions in this prototype are composed of 3-D feature authoring and modeling along with database schema, stereo matching, and volumetric visualization. Using these functions, several technical aspects for migration into actual 3-D GIS application are provided with experiment results. It is concluded that this result will contribute to more specialized and realistic applications by linking 3-D graphics with geo-spatial information.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.47-52
• /
• 2007

The high-rise apartment buildings have been constructed in large quantities to provide housing and used to be the popular residential types in Korea. However, it results that a number of problems are provoked such as the deteriorate of comfort and lack of sunshine access. Based on the judicial precedents, the sunshine access right should be guaranteed to enjoy uninterrupted sunlight for more than two hours continually between 9 am. and 3 pm or for more than four hours between 8 am and 4 pm in the winter solstice. The computer simulations are very strong tools to judge that the sunshine access right is infringed or not. This study aims to evaluate the efficiency of two computer simulation programs such as 3Dmax and Lightscape programs broadly used in field areas. For the study, the three dimensional computer models are suggested, and the simulations are performed on the 30 minutes intervals. Also, the simulation results are compared by the results of scaled model experiments.