• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.551-561
• /
• 1998

This paper was studied to understand the characteristics of heat transfer coefficients and surface temperature distributions around a circular combustion chamber within the heat-intercept duct of kerosene fan heater. The experiment was carried out in the heat-intercept duct of kerosene fan heater attached to the blow-down-type subsonic wind tunnel with a test section of 240 mm * 240 mm * 1200 mm. The purpose of this paper was to obtain the basic data related with normal combustion for new design from conventional kerosene fan heater, and to investigate the effect of surface temperature, local and mean heat transfer coefficients versus flow-rate of convection axial fan according to the variations of heat release conditions from kerosene fan heater during normal combustion. Consequently it was found that (i) the revolution of convection axial fan during combustion had a smaller value than that of non-combustion because of the thermal resistance due to the high temperature in the heat-intercept duct, (ii) the pressure ratio P$_{2}$/P$_{1}$ had a comparatively constant value of 0.844 according to the revolution increase of turbo fan and the heating performance of kerosene fan heater had a range of 1,494 ~ 3,852 kcal/hr, (iii) the local heat transfer coefficient around a circular combustion chamber had a comparatively larger scale in the range of 315 deg. < .theta. < 45 deg. than that in the range of 90 deg. < .theta. < 270 deg. as a result of heat transfer difference between front and back of a circular combustion chamber, and (iv) the mean heat transfer coefficient around a circular combustion chamber increased linearly like a H$_{m}$=95.196Q+104.019 in condition of high heat release according to the increase of flow-rate of axial fan.n.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1739-1743
• /
• 2014

MicroRNAs are a class of small noncoding RNA which play important regulatory roles in a variety of cancers. MiRNA-specific expression profiles have been reported for several pathological conditions. In this study, we combined large scale parallel Solexa sequencing to identify 11 up-regulated miRNAs and 19 down-regulated miRNAs with computational techniques in the sera of ovarian cancer patients while using healthy serum as the control. Among the above, four miRNAs (miR-22, miR-93, miR-106b, miR-451) were validated by quantitative RT-PCR and found to be significantly aberrantly expressed in the serum of ovarian cancer patients (P<0.05). There were no significant differences between samples from cancer stage I/II and III/IV. However, the levels of miR-106b (p=0.003) and miR-451 (p=0.007) were significantly different in those patients under and over 51 yearsof age. MiR-451 and miR-93 were also specific when analyzed with reference to different levels of CA125. This study shows that Solexa sequencing provides a promising method for cancer-related miRNA profiling, and selectively expressed miRNAs could be used as potential serum-based biomarkers for ovarian cancer diagnosis.

• Journal of architectural history
• /
• v.16 no.3
• /
• pp.7-20
• /
• 2007

A bridge is a space used as a passage. This space should be functional, solid, and beautiful. Since the beginning of human life, bridge architecture has given importance to function as a connection from one place to another. Stepping stones in the stream were the connections between divided spaces in the agricultural life, the bridge on the entrances of a town was the place for separation, expectation, and communication for people gathering around the community. Southern Chinese provinces such as Zhejiang, Hunan, Yunnan, and Guizhon is famous for it's spectacular scenary, and tribes like the 'Miao' and 'Dong' live in a cooperate community. The 'Dong' tribe is one of the 'Yue' genealogy where the people have settled down in this place in the days of 'Qin Shi Huang(Qin dynasty)'. As the population of the 'Dong' tribe growed, they used a bridge to connect town to town. The scale became larger with additional design, giving splendid achievement to bridge architecture. The 'Fungyu bridge' in Tongdao and 'Chungyang bridge' in Sanjiang are some fine examples. The Fungyu bridge could be defined as a bridge which blocks wind and rain, this has the same function as the lounge bridge in Taishun located in southern Zhejiang province. In Taishun, 5 minority races such as the 'Dong' and 'Miao' people have been living together as a clan society for centuries on mountains as high as 1000m following their own tradition. The 'Xiliu river' flowing thorough has a variety of bridges remaining in it's original form, and it is recently known as a museum of ancient bridges. The formation of the bridges in Tongdao and Taishun shows that it is different with the arch and straight bridges remaining in Korea. In this study, it is readjusting the base data, showing plan characteristics and describing the construction of the wooden structure above the bridge post.

• Journal of architectural history
• /
• v.17 no.4
• /
• pp.97-112
• /
• 2008

In this study, I attempted to the architectural design characteristics of Daeung-Jeon in Sudeok Temple. For this purpose, After I set up several assumptions in the basis of the general characteristics of Korean wood architecture, and then, analyzed floor plan, structural formation and section sizes of structure and bracket members in relation to module and unit. As the results, the characteristics of the design process of plan and structure are follows. (1) 1 ja(尺), the unit applied to this building is measured $307.6{\sim}318.3mm$) and the average is 312.9mm (2) It is estimated that the floor plan designed on the basis of the top of columns. By the applied unit, every bay of the front side and the side is each designed by 15 ja and 8.5 ja. (3) The section is composed of piled members which have same section size. As basic module of section size called 'jae(재;材)', it is estimated at width 0.45 ja by height 0.75 ja. And as the secondary module, height between jae and is called 'gyoe(계;)' and it wes designed by three height size of 0.25 ja, 0.27 ja and 0.30 ja, (4) It is estimated that the section plan was designed by the order as follows. Firstly, the horizontal position of purlins wes decided on the basis of the intersection point of long and short rafters, and then the position and the section size of purlins and jangheyo(長舌) wes decided on the basis of the slope of roof and rafters. Secondly, going down from purlins, the members of structure composed of 'jae' and 'gyoe' was repeated. Lastly, for the purpose of linking the structure members located on the center line of adjacent purlins organically, the height of whaban(화반) was controlled.

• Journal of Korean Clinical Nursing Research
• /
• v.21 no.3
• /
• pp.335-346
• /
• 2015

Purpose: The purpose of this study was to identify patient satisfaction about nursing care provided by Advanced Practice Nurses (APN) using the La Monica-Oberst Patient Satisfaction Scale (LOPSS). Methods: The investigation was conducted including 263 patients who experienced care provided by 41 APNs at a tertiary hospital in Korea. Patient satisfaction with nursing care was measured using 41-item LOPSS. We analyzed the data using descriptive statistics, independent t-test and one-way ANOVA. Results: Overall patient satisfaction with APN care was high. The LOPSS scores for APNs were 52.26 for good impression, 61.75 for interpersonal support, 81.32 for dissatisfaction and 195.93 for total score. "APNs talk down to me" was a reverse coding item which demonstrated the highest score for patient satisfaction. Among patients' characteristics, age and type of main caregiver were independent factors related to patients's satisfaction. Among APN's characteristics, work experience was significantly related to patients' satisfaction. Conclusion: This study identified patient satisfaction regarding nursing care provided by APNs. High patient satisfaction in APN services demonstrated APNs' contribution to quality improvement in health care services. It is recommended that various outcome research about APN service needs to be performed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.140-152
• /
• 2016

It is very important for the competitiveness and sustainable management of enterprises that the rapid changes in the managerial environments quickly and accurately are responded. For example, the large-scale investment accompanied by bad alternatives in accordance with misunderstanding of the managerial environments yields the huge cost and effort to modify and improve. In firm management, the quality of products and the productivity are influenced by changes of the endogenous factors yielded in manufacturing process and the exogenous factors as market, etc. These changes include not only changes in 4M (man, machine, material, method) but also those in the market, competitors, and technologies in the process of commodification, i.e., first, such disturbances make dispersion of the process big and odd. By Shewhart chart it can be checked that the process monitored is control-in or out. Business administration executes activities for input stabilization by monitoring changes in 4Ms, comparing with the standards, and taking measures for any abnormality. Second, TRM (technology road map) is to prospect product deployment and technological trend by predicting technologies in the competitive environment as the market, and to suggest the future directions of business. So, TRM must be modified and improved according to DR (design review) stages and changes in mass-production like input material change. Therefore, a role of TRM in input stabilization for reducing cost and man-hour is important. This study purposed to suggest that the environment changes are classified into endogenous factors and exogenous factors in production process, and then, quality and productivity should be stabilized efficiently through connection between TRM and input stabilization, and to prove that it is more effective for the display industry to connect TRM with input stabilization rather than to use TRM separately.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.75-82
• /
• 2017

We present a new type of receiver-transmitter optical system that can be adapted to the sensor head of a displacement-measuring interferometer. The interferometer is utilized to control positioning error and repetition accuracy of a wafer, down to the order of 1 nm, in a semiconductor manufacturing process. Currently, according to the tendency of scale-up of wafers, an interferometer is demanded to measure a wider range of displacement. To solve this technical problem, we suggest a new type of receiver-transmitter optical system consisting of a GRIN lens-Collimating lens-Afocal lens system, compared to conventional receiver-transmitter using a single collimating lens. By adapting this new technological optical structure, we can improve coupling efficiency up to about 100 times that of a single conventional collimating lens.

• Science of Emotion and Sensibility
• /
• v.23 no.1
• /
• pp.69-78
• /
• 2020

This study compares and analyzes user experiences of intelligent personal assistant services based on the evaluation criteria of human-computer interaction to explore positive elements of user experiences and factors that could be improved. The research was conducted on Apple's Siri, Google's Google Associate, and Samsung's Bixby, which is presently the smartest personal assistant service on the market. The research method was to compare and analyze the concepts and characteristics of the current services through a literature review and by interviewing seven UI/UX design experts for the second 2 weeks using contextual inquiry. The interview reorganized Peter Morville's user experience honeycomb, reducing his seven usability principles down to five, asking questions about usability, convenience, visual attractiveness, reliability, and satisfaction. On the basis of the reconfigured usability principle, the assessment was conducted on the basis of the assessment timing and the system usability scale. This study is meaningful in that it analyzed the user experience of artificial intelligence personal assistant services both quantitatively and qualitatively.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.87-91
• /
• 2005

[ $YBa_{2}Cu_{3}O_{7-x}$ ] thin films were fabricated on $LaAlO_3$(100) substrate by TFA-MOD process. Yttrium-excess (0, 2.5, 5, 10, 15, 20 $at\%$) coating solution was prepared by adding extra amount of yttrium into a stoichiometric(Y:Ba:Cu=1:2:3) TFA precursor solution. Results are presented concerning the influence of excess yttrium additions on the microstructure development and superconducting properties of $YBa_{2}Cu_{3}O_{7-x}$ film. Large sized CuO particles was observed by SEM EDS investigation. The addition of excess yttrium affected little on $T_c$ of $YBa_{2}Cu_{3}O_{7-x}$ film. $J_c$ of YBCO film was enhanced with excess yttrium addition. Jc maximum of $2.21\;MA/cm^2$ (77 K, self field) appeared with the $15\;at\%$ addition of excess yttrium. With further yttrium addition up to $20\;at\%$, Jc decreased down to $0.9\;MA/cm^2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.163-163
• /
• 1999

MOSFET, MESFET 그리고 MODFET는 Logic ULSIs, high speed ICs, RF MMICs 등에서 중요한 역할을 하고 있으며, 그것의 gate electrode, contact, interconnect 등의 물질로는 refractory metal을 이용한 CoSi2, MoSi2, TaSi2, PtSi2, TiSi2 등의 효과를 얻어내고 있다. 그중 TiSi2는 비저항이 가장 낮고, 열적 안정도가 좋으며 SAG process가 가능하므로 simpler alignment process, higher transconductance, lower source resistance 등의 장점을 동시에 만족시키고 있다. 최근 소자차원이 scale down 됨에 따라 TiSi2의 silicidation 과정에서 C49 TiSi2 phase(high resistivity, thermally unstable phase, larger grain size, base centered orthorhombic structure)의 출현과 그것을 제거하기 위한 노력이 큰 issue로 떠오르고 있다. 여러 연구 결과에 따르면 PAI(Pre-amorphization zimplantation), HTS(High Temperature Sputtering) process, Mo(Molybedenum) implasntation 등이 C49를 bypass시키고 C54 TiSi2 phase(lowest resistivity, thermally stable phase, smaller grain size, face centered orthorhombic structure)로의 transformation temperature를 줄일 수 있는 가장 효과적인 방법으로 제안되고 있지만, 아직 그 문제가 완전히 해결되지 않은 상태이며 C54 nucleation에 대한 physical mechanism을 밝히진 못하고 있다. 본 연구에서는 증착 시 기판온도의 변화(400~75$0^{\circ}C$)에 따라 silicon 위에 DC/RF magnetron sputtering 방식으로 Ti/Si film을 각각 제작하였다. 제작된 시료는 N2 분위기에서 30~120초 동안 500~85$0^{\circ}C$의 온도변화에 따라 RTA법으로 각각 one step annealing 하였다. 또한 Al을 cosputtering함으로써 Al impurity의 존재에 따른 영향을 동시에 고려해 보았다. 제작된 시료의 분석을 위해 phase transformation을 XRD로, microstructure를 TEM으로, surface topography는 SEM으로, surface microroughness는 AFM으로 측정하였으며 sheet resistance는 4-point probe로 측정하였다. 분석된 결과를 보면, 고온에서 제작된 박막에서의 C54 phase transformation temperature가 감소하는 것이 관측되었으며, Al impuritydmlwhswork 낮은온도에서의 C54 TiSi2 형성을 돕는다는 것을 알 수 있었다. 본 연구에서는 결론적으로, 고온에서 증착된 박막으로부터 열적으로 안정된 phase의 낮은 resistivity를 갖는 C54 TiSi2 형성을 보다 낮은 온도에서 one-step RTA를 통해 얻을 수 있다는 결과와 Al impurity가 존재함으로써 얻어지는 thermal budget의 효과, 그리고 그로부터 기대할 수 있는 여러 장점들을 보고하고자 한다.