• 한국학교ㆍ지역보건교육학회지
• /
• 제1권2호
• /
• pp.49-71
• /
• 2000

The purpose of this study was to serve as a basis for school health care of better quality, by making a comparative analysis of the health care satisfaction and attitude of elementary school students in consideration of their general characteristics and the presence or absence of nurse teacher. The subjects in this study were 919 selected six graders in 16 elementary schools in the city of Tongduchun, Koyang and Euijungbu, Yangju-kun and Yeunchun-kun. A survey was conducted with questionnaire designed for measurement of health care satisfaction and attitude. As a result of analyzing the data collected from June 1 through 15, 2000, the conclusions were as follows. 1) As for the general characteristics of the students investigated, the subjects included 513 boys(55.8%) and 406 girls(44.2%). The schools where 390(42.4%) students attended were located in municipal area, and the schools where 529(57.6%) students attended were located in kun area. 608(66.2%) students had a nurse teacher at their schools, while 311(33.8%) students had no nurse teacher. 498(54.2%) had an experience to use the health room this year, but 421(45.8%) had no such an experience. Their mean school life satisfaction was scored $3.42{\pm}.71$, above the average. And their health condition was rated $3.81{\pm}.87$, which implied they tended to be in good health. 2) The mean satisfaction at the health room operation was scored $3.33{\pm}.71$, above the medium level. What they were most satisfied with($4.02{\pm}1.08$) was, among the health room facilities, that there were beds. But they expressed the least satisfaction($2.83{\pm}1.17$) at the location of health room. The presence or absence of nurse teacher made a significant difference to their satisfactionat health room operation, because the students in schools with nurse teacher showed greater satisfaction($3.42{\pm}.72$) than the others in schools with no nurse teacher did($3.15{\pm}.66$). 3) Concerning their attitude to use the health room in case of disease or accident occurrence, a lot of students in schools with a nurse teacher, who had ever suffered from indigestion, headache or traumatic injury, used the health room. In schools with no nurse teacher, there was a tendency to talk to their class teachers(p<.001). The recognition of the necessity for health counseling was generally on a medium level. The counselor whom they wanted to discuss health problem with was family or friend in the largest cases. Few students discussed with class teachers in case there was a nurse teacher in school. Instead, some of them discussed with friend, family or nurse teacher, and there was a significant difference between them(p<.001). 4) The mean satisfaction at health, sanitation and environmental management was rated $3.20{\pm}.90$, above the average. The classroom lighting gave them the best satisfaction with $3.67{\pm}1.07$, but the satisfaction at toilet cleanness and disinfection was not good with $2.83{\pm}1.19$. By the presence or absence of nurse teacher, those who had a nurse teacher expressed better satisfaction at water supply facilities including hot water than the others who had no nurse teacher did(p<.001). But no significant difference was observed in the other items. 5) The health education satisfaction was rated $3.19{\pm}.99$, which was on a medium level. By item, the mean satisfaction level was $3.36{\pm}1.19$ at nurse teacher's explanation about treatment, $3.13{\pm}1.15$ at the frequency of health education, and $3.08{\pm}1.16$ at the explanation on the cause of disease. By the presence or absence of nurse teacher, the students with nurse teacher showed significantly better satisfaction at every factor0(p<.001). 6) Regarding health education attitude, their recognition of the need for school health education was scored $3.89{\pm}.96$. Those who had a nurse teacher felt it more necessary($3.96{\pm}.92$), yet the others who had no nurse teacher felt its necessity a little less($3.74{\pm}1.01$). The most preferred thing for them to learn in health education was first aid, followed by sex education, obesity prevention, safety accident prevention in school and outdoors, smoking-related health, good use of leisure time, and environmental pollution cause in the order named. According to the presence or absence of nurse teacher, there was a significant difference in sex education(p<.01), but no significant disparities were found in the other factors. The most preferred person who would offer health education was a lecturer from the outside(45.8%) and nurse teacher(45.4%). Their preference for class teacher as a person in charge of health education was just 8.8%. But the presence or absence of nurse teacher didn't produce any differences to their preference for a person in charge of health education.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• 설비공학논문집
• /
• 제19권1호
• /
• pp.94-131
• /
• 2007

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.

• 설비공학논문집
• /
• 제28권6호
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.

• 한국식품조리과학회지
• /
• 제23권5호
• /
• pp.589-600
• /
• 2007

본 연구는 서울 지역에 위치한 객단가 만원에서 이만원 수준의 7개 레스토랑을 대상으로 연구팀이 개발한 위생관리 모니터링 도구를 활용하여 위생관리실태를 조사하고, 위생관리가 소홀히 할 경우에 잠정적으로 식중독 유발 가능성이 있는 주요 리스크 인자를 규명하는 한편, 이를 중심으로 레스토랑의 종사원을 위한 위생관리 교육 매체를 개발하였다. 이에 대한 결과를 요약하면 다음과 같다. 1. 연구에 참여한 외식업체는 한식당 6 업소($A{\sim}F$), 일식당이 1개소(G)이었고, 모두 서울에 위치해 있었다. 업장 면적은 90평($297m^2$)에서 400평($1332.4m^2$) 범위이었고, 주방의 면적은 가장 작은 곳은 4평($13.2m^2$)에서 크게는 120평($396.7m^2$) 범위였으며, 업장면적 대비 주방면적 비율로 환산하면 4.4%에서 30% 수준이었다. 조사에 참여한 외식업체들은 중소 기업형 이상의 업체들로 일일 이용 고객수의 규모는 300명에서 925명이었고, 객단가는 9,000원에서 23,000원 수준이었다. 2. 서울 지역 7개의 외식업소를 대상으로 한 위생 관리 점검 결과, 위생관리 수행도 점수는 100점 만점에 57점 수준으로 많은 개선이 요구되는 수준이었다. 특히 음식의 생산공정을 평가하는 영역인 식품위생 영역에 관한 중점적인 교육이 필요한 것으로 나타났다. 위생평가점수는 G업소가 73.0점으로 가장 높았고, A업소가 51.0점으로 가장 낮았다. 영역별 평균점수는 개인위생이 18점 만점에 9.57점(53.1%), 식품위생은 50점 만점에 26.4점(52.8%), 환경위생은 32점 만점에 19.5만점(61.1%)을 나타났다. 이러한 결과를 바탕으로 영역별로 중요도를 달리하는 위생 교육이 필요하였다. 3. 위생관리 평가 항목별 점수를 근거로 레스토랑에서 식중독 발생의 잠재적인 위험 요소로는 개인위생에서 '수세대 구비 및 손세척의 올바른 실행(0.29/4점)으로 나타났다. 식품위생측면에서는 '올바른 검수관리(0.29/4점)', '냉장 냉동 식자재 검수 시 온도 확인 및 조치(0/4점)', '상온 창고내 물품의 바닥방치 금지(0/2점)', '생채소와 과일의 적절한 세척(1.71/4점)' 으로 나타났다. 환경위생관리측면에서는 '청소, 소독 프로그램의 수립 및 감독(2/4점)', '방충 및 구서 관리(0.84/2점)', '화장실 청결 관리(0.43/3점)' 등으로 나타났다. 4. 이상의 결과를 바탕으로 위생교육 매뉴얼을 개발하였다. 위생교육 내용은 4가지 원칙 -개인위생확보, 교차오염방지, 시간온도관리, 냉장관리- 으로 구성하였고, 8영역으로 세분화하였다. 교육 설계방식은 강의식 교육을 위주로 하고, 주제별로, 실연식 교육, 시청각 교육, 토의식 교육을 위한 강의 자료를 마련하였다. 이상의 결과에서 보여 준 레스토랑에서 식중독 예방을 위한 위생관리 활동 내용으로 실천율이 낮은 활동을 규명하고 이 활동에 대한 지속적인 모니터링과 개선활동을 전개한다면 레스토랑의 식중독 예방에 크게 도움일 될 것으로 사료된다. 또한 본 연구에서 개발된 위생교육 자료를 활용한다면, 외식업체의 전반적인 위생수준을 향상시키고 식품의 안전성을 확보하는데 크게 기여할 것으로 기대된다. 최근에 외식업계에서 발생되고 있는 식중독 사고는 이상 기후의 영향이나 시설미비도 그 원인이겠지만, 무엇보다도 중요한 요인은 경영층의 위생에 관한 인식부족, 교육 프로그램의 부재로 사료된다. 그러므로 양적으로 과포화상태에 이르고 있는 외식업계의 질적인 향상을 위해서는 외식업체는 위생교육의 지속적인 실천과 모니터링을 강화하고, 그 결과를 인사고과시스템에 반영하는 통합적인 노력이 요구된다.

• Journal of Yeungnam Medical Science
• /
• 제12권2호
• /
• pp.347-365
• /
• 1995

도시 보건소 직원의 보건소 업무에 대한 인식 및 태도를 파악하기 위하여 대구직할시 7개 보건소 직원 310명을 대상으로 1994년 8월 15일부터 9월 30일까지 설문조사를 실시하여 252명(회수율 81.3%)의 자료를 분석하여 다음과 같은 결과를 얻었다. 조사대상은 남자가 95명(37.3%), 여자가 157명(62.3%)이고, 60.3%가 대졸이상자였다. 현재 근무부서의 시설이 보건사업을 수행하는데 적합하다고 한 의견이 28.6%, 적합하지 않다가 51.1%였고, 보유 기자재가 사업수행에 적합하다가 19.4%, 적합하지 않다가 39.0%였으며, 보건소의 인력수가 적정하다가 28.6%, 적합하지 않다가 44.8%였다. 근무부서의 예산이 보건사업 수행에 적합하다고 한 의견이 13.1%, 적합하지 않다가 38.5%였다. 지방자치제 실시후 사업내용이 바뀌어야 한다고 한 의견이 51.9%, 지방자치제의 실시가 자신의 근무부서의 업무에 도움이 된다고 한 의견이 25.4%, 도움되지 않는다가 24.6%였다. 지방자치제 실시에 따라 보건소의 조직과 기능이 개선되어야 한다는 의견은 78.6%였다. 사업 목표량의 설정이 해당 부서나 지역의 실정에 비추어 맞게 책정되어 있다는 의견이 11.1%, '그렇지 않다'가 43.3%였다. 업무 수행을 위한 전문적인 지식이나 기술에 대한 교육을 더 받아야 한다고 한 의견이 57.5%, 더 받을 필요없다가 20.6%였고, 자신의 업무수행에 자율성이 있다고 생각하는 견해가 35.7%, 자율성이 없다가 25.8%였으며, 현재 하고 일에 만족한다가 39.3%, 만족하지 못한다가 16.3%였다. 보건소의 인사관리에 대해서는 11.5% 합리적이라고 하였고, 47.3%가 불합리적 이라고 하였으며, 보건소가 주민들로부터 신뢰를 받고 있다는 의견이 41.3%, '그렇지 않다'는 의견이 13.1%였다. 보건소에서 지역주민에게 제공하는 서비스 중에서 잘 시행되고 있는 사업은 결핵관리, 일반진료, 모자보건사업의 순이었으며, 부족한 사업은 보건교육, 치과진료, 위생, 통합보건사업의 순이었다. 향후 보건소에서 주민에게 제공해야 할 서비스로는 노인보건사업, 가정의료사업, 재활보건사업, 당뇨병관리, 고혈압관리, 학교보건사업, 정신보건사업의 순으로 지적하였다. 보건소 근무자들은 시설, 기자재, 인력, 예산, 인사관리, 사업목표량의 설정 및 평가, 인사관리 등에 대해서는 부정적인 의견이 많았으며, 업무수행을 위한 보수교육, 지방자치제 실시를 통한 업무의 변화, 업무의 자율성, 업무의 만족도 면에서는 대체로 긍정적인 의견을 가진 것으로 나타났다.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• 한국식품영양과학회지
• /
• 제35권4호
• /
• pp.456-463
• /
• 2006

본 연구는 최근 새로운 외식 산업 트랜드로 부각되고 있는 베이커리 카페의 특징적인 고객 선택속성을 규명하고 고객인지 중요도와 수행도의 비교 분석을 통해 베이커리카페 운영상의 중점 개선점과 차별화된 마케팅전략을 제안하기 위채 2005년 10월 12일부터 10월 20일까지 서울지역 만 20세 이상 소비자 320명을 대상으로 실시되었다. 설문지는 제품, 서비스, 시설, 입지, 브랜드 등과 관련한 선택속성별 중요도와 수행도를 평가하도록 구성되었고, 유효한 275부(이용율 85.9%)가 분석에 이용되었으며, 주된 결과는 다음과 같다. 베이커리카페의 특징적인 고객 선택속성을 도출하기 위해 문헌조사와 포커스그룹 인터뷰 및 파일럿테스트를 통해 개발한 설문지는 타당도와 신뢰도가 검증되어 도구호서 적합한 것으로 나타났다. 고객인지 베이커리카페 선택속성 중요도 수준은 위생 및 청결, 제품 품질, 편안하고 쾌적한 시설과설비, 베이커리 제품의 맛, 조용하고 편한 분위기, 서비스속도, 가시성 등에서 높게 나타나 베이커리카페 이용고객은 제품뿐 아니라 서비스와 분위기에 대한 중요도를 높게 여기고 있는 것으로 나타났고, 수행도에 있어서는 브랜드 차원만이 중요도에 비해 수행도가 높았고, 제품 차원, 서비스 가격차원, 내부환경 차원에 있어서는 중요도에 비해 수행도가 유의적으로 낮아 개선이 필요한 것으로 사료된다. 중요도 수행도 분석(IPA) 결과에서는 차원별로는 서비스 가격 차원의 경우 중요도는 높은 반면 수행도가 낮은 중점 개선 영 역에, 내부환경 차원, 제품 차원, 브랜드 차원은 중요도와 수행도가 모두 높은 유지관리 영역에, 이용의 편의성 차원과 입지 차원은 중요도, 수행도가 모두 낫은 향후 개선대상 영역에 포함되어 서비스 가격 차원의 개선이 가장 시급한 것으로 나타났고, 기타 차원의 경우 장기 적이고 지속적인 관리 개선책 마련이 필요한 것으로 사료된다. 세부속성별로는 "분위기가 조용하고 편안하다.", "불만이나 고충이 신속히 처리된다."라는 속성이 중점개선 영역에 포함되어 분위기와 고충처리 부분에 대한 개선을 위한 집중적인 노력이 필요한 것으로 분석되었고, "내부시설 및 기물이 쾌적하다.", "종업원이 친절하다." 항목은 유지관리 영역에 포함되기는 하였으나, 수행도 수준이 중요도에는 다소 못 미쳐 일부 개선이 필요한 것으로 사료된다. 전반적으로 기존의 일반 베이커리 연구들에서 나타난 선택속성 및 고객인지 중요도가 제품중심이었던 결과와는 달리 베이커리카페에 대해 고객이 인지하는 중요 선택속성은 제품, 서비스, 인테리어 등의 복합적인 요소가 포함되는 것으로 나타나 향후 베이커리카페 관련연구에서는 이러한 차이를 명확히 파악하고 연구를 전개해 나가야 할 것으로 사료된다. 또한 업체의 마케팅전략 수립에 있어서도 고씩의 욕구에 부응하기 위해 중요도와 수행도의 차이가 큰 선택속성 차원과 세부항목을 중점대상으로 하여 일반 베이커리와는 구분되는 방식으로 접근해야 할 것으로 판단된다. 이상의 결과를 종합해볼 때, 베이커리카페 이용고객은 특징적인 선택속성을 기준으로 베이커리카페를 선택하는 것으로 나타나 새로운 외식 산업 군인 베이커리카페의 조기정착과 발전을 위해서는 이러한 선택속성에 대한 이해를 바탕으로 활발한 연구가 진행되어야 할 것으로 사료된다. 또한 본 연구를 통해 도출된 선택속성 차원 중 많은 경우에 있어 고객이 인지하고 있는 중요도에 비해 수행도가 낮은 것으로 나타나 해당 차원의 개선을 위한 경영자들의 노력이 요구되어 진다.