• Magazine of the Korea Concrete Institute
• /
• v.5 no.3
• /
• pp.107-115
• /
• 1993

최근 건설공사의 급증으로 인한 하천골재의 고갈로 콘크리트용 대체골재로서 해사\ulcorner선사 등이 대구되고 있다. 그러나 해사는 세척하지 않고 그대로 콘크리트에 사용할 경우 콘크리트중의 철근부식 촉진에 따른 콘크리트의 균열발생 등 조기 노후화현상으로 내구성에 많은 문제점을 내포하고 있고, 산사는 국내 연구실적이 전혀 없는 상태에서 지역적으로 무분별하게 사용되고 있어 이들에 관한 제반 공학적 특성 및 활영방안 연구가 시급한 실정이다. 따라서 본 연구는 산사\ulcorner해사를 사용한 콘크리트의 압축강도 특성 및 해사의 염분함량과 콘크리트의 물-시멘트비에 따른 철근부식량과의 관계를 구명하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.463-466
• /
• 2005

This study examined the effects of comparatively widely used fine aggregates in the domestic construction fields on the quality of concrete through the analysis of the effects of such fine aggregates on the physical properties of fresh concrete and strength of hardened concrete. Results revealed that crushed sand degrades the fluidity and air entraining of concrete compared to natural aggregates like sea sand and river sand. Especially, the use of crushed sand exhibiting low grain shape and grade was seen to have larger adverse effect on the physical properties of concrete.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.108-112
• /
• 2005

In this research, the physical properties of fresh concrete using lime stone powder as a part of cement were investigated. Fresh concrete using lime stone powder was prepared with various lime stone powder replacement($5{\sim}12$ volume %) for cement and the quantities of sand aggregate ratio in concrete were 47.3%, 48.5% and 49.4% of ratio of sand aggregate. The workability, flowing characteristics, air content and bleeding of concrete using lime stone powder were tested and the results were compared with those of ordinary portland cement concrete. In the experiment, we acquired satisfactory results at the point of fresh concrete characteristics using lime stone powder within the replacement ratio of $8{\sim}12%$ and the optimum quantity of sand aggregate ratio in concrete was found to be $48.5%{\sim}50%$ of ratio of sand aggregate.

• Advances in concrete construction
• /
• v.13 no.4
• /
• pp.315-325
• /
• 2022

Reinforced concrete structures are exposed throughout their lifetime to the phenomenon of carbonation, which considerably influences their durability by causing corrosion of the reinforcements. The fight against this phenomenon is usually ensured by anti-carbonation coatings which have the possibility of limiting the permeability to carbon dioxide or with coatings which absorb the CO₂ present in the air. A coating with good crack-bridging (sealing) capacity will prevent water from entering through existing cracks in concrete. Despite the beneficial effect of these coatings, their durability decreases considerably over time with temperature and humidity. In order to use coatings made from local materials, not presenting any danger, available in abundance in our country, very economical and easy to operate is the main objective of this work. This paper aim is to contribute to the formulation of a corrected dune sand-based mortar as an anti-carbonation coating for concrete. The results obtained show that the cement mortar based on dune sand formulated has a very satisfactory compressive strength, a very low water porosity compared to ordinary cement mortar and that this mortar allows an improvement in the protection of the concrete against the carbonation of 60% compared to ordinary cement mortar based on alluvial sand. Moreover, the formulated cement mortars based on dune sand have good adhesion to the concrete support, their adhesion strengths are greater than 1.5MPa recommended by the standards.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.342-349
• /
• 1998

The objective of this study is to investigate the characteristic change of antiwashout underwater concrete with variation of blend ratio of sea sand and fine aggregate percentage through experimental researches. According to the experiments results, when sea sand are mixed in antiwashout underwater concrete mixture by about 40% per total fine aggregate, in fine aggregate percentage of 40%, it is found that the flowability fit and the compressive strength is higher others.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.597-600
• /
• 1999

Recitly, the use of sea-sand is increasing in the construction due to the rapid reduction of river-sand. In that case, one of the major problem is that a sand salt in sea-sand induce the corrosion of embedded reinforcing bar in concrete. In addition, the deterioration of concrete quality arises a social problem in the durability of reinforced concrete. This research is aimed at providing the data for the control of design method of repair and rehabilitation in the reinforced concrete structure by means of the evaluation of structural performance due to corrosion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.118-123
• /
• 1995

Evaluating the moisture content for sand is useful for quality cotnrol of concrete. If water content of evaluate instantly and apply for mix proportion sand of concrete, in mixing propertion of concrete, it can makes to improve of concrete quality. In this study, the evaluating method for moisture content of sand, using the electric velocity and dielectric constant was proposed as a study of quality control of concrete. The obtained results are summarized as follow. The resistance ratio was decreased as the increase of moisture content The dielectric constant was decreased as the sand of the moisture content increase.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.153-159
• /
• 1999

The objective of this study was to investigate the bond strength properties of antiwashout underwater concrete. The fine aggregate(river sand, blended sand (river sand : sea sand = 1 : 1), condition of cast and cure(sea water, fresh water), and compressive strength of proportion(210kgf/$\textrm{cm}^2$ ~ 330kgf/$\textrm{cm}^2$) were chosen as the experimental parameters. The experimental results show that the underwater segregation resistance was increased, but flowability (slump flow) and air contents were decreased as the compressive strength of proportion increased. Bond strength of antiwashout underwater concrete was similar to plain concrete. From this study, rational analytic formula for the modulus of rupture and bond stress are to be from compressive strength of concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.81-84
• /
• 2006

Currently, natural aggregates of good quality are hard to use because of continuous decrease of internal aggregate resource and regulation of gathering. So, use of crushed sand was being increased. On the other hand, skyscraper projects with 100 stories are being planned within the country and high strength concrete must be used to construct a skyscraper with 100 stories. High strength concrete is necessary to use crushed sand too because we are still unable to secure natural aggregates of good quality. So, This study indicated basic data necessary for mix design of high strength concrete through valuation of concrete property by quality variation of crushed sand.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.2
• /
• pp.105-108
• /
• 2010

In order to determine the effect of the use of limestone sand on chloride ion ingress in mortar, specimens were cast with two different sands: siliceous sand (used as reference) and limestone crushed sand (used for this study). To compare and assess the resistance of this mortar to chloride penetration, two different diffusions tests were employed: slow migration and rapid migration (AASHTO test). In this study, calculation of the effective diffusion coefficient is proposed using a model based on Nernst. Planck equation. The diffusion coefficients from each sample were compared. The results for all tests show that the diffusion coefficients for siliceous sand mortar are larger than those obtained with limestone sand. It appears also that the diffusion coefficient varies as a function of the W/C ratio.