• Speech Sciences
• /
• v.12 no.2
• /
• pp.153-170
• /
• 2005

The sub-Nyquist nonuniform sampling (SNNS) and the perfect reconstruction (PR) formula are proposed for the development of a systematic method to obtain minimal representation of a speech signal. In the proposed method, the instantaneous sampling frequency (ISF) varies, depending on the least upper boundary of spectral support of a speech signal in time-frequency domain (TFD). The definition of the instantaneous bandwidth (IB), which determines the ISF and is used for generating the set of samples that represent continuous-time signals perfectly, is given. Also, the spectral characteristics of the sampled data generated by the sub-Nyquist nonuniform sampling method is analyzed. The proposed method doesn't generate the redundant samples due to the time-varying property of the instantaneous bandwidth of a speech signal.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.17
• /
• pp.67-80
• /
• 1988

This study is concerned with the comparison of two time homogeneous Poisson processes. Traditionally, the methods of testing equality of Poisson processes were based on the binomial distribution or its normal approximations. The sampling plans used in these methods are to observe the processes concurrently over a predetermined time interval, possibly different for each process. However, when the values of the intensities of the processes are small, inverse type sampling plans are more appropriate since there may be cases where only a few or even no events are observed in the predetermined time interval. This study considers 9 inverse type sampling plans for the comparison of two Poisson processes. For each sampling plans considered, critical regions and the design parameters of the sampling plan are determined to guarantee the significance level and the power at some values of the alternative hypothesis. The Problem of comparing of two Weibull processes are also considered.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.415-423
• /
• 2018

This study uses a level selection algorithm with fixed sampling frequency for modular multilevel converter (MMC) systems. Theoretically, the proposed method increases the level infinitely while the sampling time remains the same. The proposed method called cluster stream buffer (CSB) consists of several clusters, wherein each cluster is composed of 32 submodules that depend on the level of the submodules in the MMC system. To increase the level of the MMC system, additional clusters are used, and the sampling time between clusters is determined from the sampling time between levels needed for utilizing the entire level from the MMC system. This method is crucial in the control of MMC-type HVDC systems because it improves scalability and precision.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.125-137
• /
• 1996

This study was designed to investigate effects of relative humidity on the breakthrough of charcoal tubes at a fixed vapor concentration and sampling time during mixed organic vapor sampling. A vapor generator was used to generate three different concentrations of mixed organic vapor and a stainless steel chamber was fabricated and utilized to maintain three different percentages of relative humidity while maintaining a constant temperature. The results were as follows; 1. At high relative humidity, breakthrough of mixed organic vapor occurred quickly at low vapor concentration than at high vapor concentration because of the reduced adsorption volume of charcoal tube due to humidity. 2. Breakthrough by competitive adsorption of vapors onto charcoal tube was observed at first from n-hexane having the lowest boiling point and highest vapor pressure among the three organic vapors investigated, followed by TCE. No breakthrough was observed from toluene under all experimental conditions. 3. For n-hexane, breakthrough was observed after 2 hours of sampling and breakthrough rates were increased as relative humidity increased. For TCE, breakthrough was found after 3 hours of sampling and breakthrough rates by sampling time were increased as vapor concentration increased. 4. The adsorbed amount of mixed organic vapor at breakthrough was shown to have statistically significant correlations with sampling time, relative humidity, and vapor concentration in descending order of correlation. Relative humidity and sampling time for n-hexane and sampling time and concentration for TCE were both statistically significantly correlated. 5. Relative humidity was found to affect the amount of breakthrough of mixed organic vapor and n-hexane. Among three percentages of relative humidity investigated, the amount of breakthrough at 85 % relative humidity was significantly larger than those of at lower percentages of relative humidity. No statistically significant difference was found between 25 % and 55 % relative humidity. 6. The results of multiple regression analysis between breakthrough and relative humidity, vapor concentrations showed that the coefficient of determination of mixed organic vapor was 0.263 and those of n-hexane and TCE were 0.275 and 0.189, respectively. 7. Flow rates of sampling pumps used were found to be affected by relative humidity present. At 25 %, 55 %, and 85 % relative humidity, the relative errors of sampling pump were 1.4 %, 13.4 %, and 18.6 %, respectively. In conclusion, the results of this study showed that high relative humidity could reduce the adsorption volume of charcoal tubes and subsequently increase breakthrough rates. Therefore, to prevent breakthrough when sampling mixed organic vapors, it is suggested that either sampling volume be reduced on the flow rate be lowered so as to minimize breakthrough of the most volatile organic vapor in the mixture. In addition, since the flow rates of a sampling pump can be adversely affected by high relative humidity, it is recommended to use a constant flow mode pump when sampling in the highly humid environment.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.552-557
• /
• 1998

Sampling schemes are intended for use in situations where stream-flow data are collected regularly, but concentration data are collected during only a limited number of time periods. Estimating water pollutant loading considering sampling intervals is presented, and for illustrative purposes the criterion is applied to the sampling station HS#3 of the Balan-reservoir watershed which is located at the southwest of Suwon. The stratification is employed uniformly for all sampling strategies in that the strata boundaries are defined using the actual distribution of flow values and the selected nonexceedence probabilities to minimize inaccuracy. Ratio estimator for SS, T-N, and T-P were used in order to calculate the water pollutant loading. A sampling scheme incorporating stratified sampling with real-time of the sampling characteristics is found to give the appropriate estimate of the mass load.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.165-171
• /
• 1989

To examine the sample variability of zooplankton, samples were collected at two stations in the nearshore off Anhung (Chungnam, Korea), using a NORPAC net (76 Cm diameter, 0.333 mm mesh size) for two days, April 5 and 6, 1989. The net was towed vertically to eliminate the source of variation due to vertical migration. During the period of 6 hours, triplicate sampling was done every one or two hour at each station. Species composition and abundances at two stations were not so different, but the abundances at each station varied greatly with respect to sampling time. Greater abundance at one sampling time ranged 2.3-8.7 times of smaller abundance at another sampling time. At the level of ${\alpha}=0.05$, however, mean abundances of different sampling time did not differ significantly from each other due to the large variance. It was believed that the large variance was caused by the time dependent effect of patchiness of which parameters were varied with time because of sea water movement. From the variation within the triplicate samples, it was considered that the abundance data obtained from single tow were not significantly different from the data in the range of 50-200% of those from single tow. From these results, the necessity for the replicate and time dependent sampling was indicated. In the nearshore like the sampling site of this study, it seemed to be better to reduce the number of stations for the replicate and time dependent sampling though the proper sampling scheme was to be decided based on the goal of the study.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2017-2022
• /
• 2008

Of the experiments to shorten NMR measuring time by sparse sampling, non-uniform sampling (NUS) is advantageous. NUS miminizes systematic errors which arise due to the lack of samplings by randomization. In this study, I report the real-time acquisition of 3D NMR data using NUS and maximum-entropy (MaxEnt) data processing. The real-time acquisition combined with NUS can reduce NMR measuring time much more. Compared with multidimensional decomposition (MDD) method, which was originally suggested by Jaravine and Orekhov (JACS 2006, 13421-13426), MaxEnt is faster at least several times and more suitable for the realtime acquisition. The designed sampling schedule of current study makes all the spectra during acquisition have the comparable resulting resolutions by MaxEnt. Therefore, one can judge the quality of spectra easily by examining the intensities of peaks. I report two cases of 3D experiments as examples with the simulated subdataset from experimental data. In both cases, the spectra having good qualitie for data analysis could be obtained only with 3% of original data. Its corresponding NMR measuring time was 8 minutes for 3D HNCO of ubiquitin.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.120-126
• /
• 2011

The fatigue damages in structural details of offshore plants can be accumulated due to various environmental loadings such as swell, wave, wind and current. It is known that load histories acting on mooring and riser systems show stationary and ergodic bimodal wide-banded process. This paper provides refined approach to obtain time signals representing stress range histories from wide-banded bimodal spectrum which consists of ideally narrow-banded and fully separated two spectrums. Variations of the probabilistic characteristics for time signals according to frequency and sampling time increments are compared with the reference data to be the probabilistic characteristics such as zero-crossing period, peak period, and irregularity factor obtained from an assumed ideal spectrum. It is proved that the sampling time increment more affects on the probabilistic characteristics than frequency increment. The fatigue damages according to the frequency and sampling time increments are also compared with the ones with minimum increment condition which are thought to be exact fatigue damage. It is concluded that the maximum sampling time increment to obtain reliable time signals should be determined that ratio of applied maximum sampling time increment and minimum period is less than approximately 0.08.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.171-177
• /
• 2011

Accuracy and computing time are considerable issues in machine learning. In general, the computing time for data analysis is increased in proportion to the size of given data. So, we need a sampling approach to reduce the size of training data. But, the accuracy of constructed model is decreased by going down the data size simultaneously. To solve this problem, we propose a new statistical sampling method having similar performance to the total data. We suggest a rule to select optimal sampling techniques according to given data structure. This paper shows a sampling method for reducing computing time with keeping the most of accuracy using cluster sampling, stratified sampling, and systematic sampling. We verify improved performance of proposed method by accuracy and computing time between sample data and total data using objective machine learning data sets.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.45-53
• /
• 2011

This paper presents a novel random sampling method for generation adequacy assessment including wind-power. Although a time sequential sampling has advantages than a random sampling in its assessment results, it takes long assessment time. Therefore, an effective random sampling method for generation adequacy assessment is highly recommended to get specific reliability indices quickly. The proposed method is based on the Monte-Carlo simulation with state sampling and it can be applied to generation adequacy assessment with other intermittent power sources.