• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.760-763
• /
• 2001

Five commercial salt-fermented shrimps contained 29.8~48.3% of salt 3.5%~7.3% of total nitrogen and 0.3~0.7g/100g of amino-nitrogen respectively. The average peptide length(APL) of five commercial salt-fermented shrimps ranged from 10.1 to 15.0. Sample B and E showed longer APL than the others with the values of 15.0 and 14.4 respectively. Protease activity showed the large differences in five samples from 17 unit to 232 unit ; sample C showed the highest protease activity with 232 unit while sample D and E were relatively lower with 17 unit and 18 unit respectively. The chitinase activities which can hydrolyze chitin the one of components on outer layer of shrimp ranged from 14.4 unit to 171 unit. Sample E had the highest chitinase activity as 171 unit but sample B showed the lowest activity with 14.4 unit. Chitooligosaccharides of five commercial salted-fermented shrimps were consisted of monoglucosamine diglucosamine and triglucosamine.

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.393-400
• /
• 2011

In a large scale survey, cluster sampling design in which a set of observation units called clusters are selected is often used to satisfy practical restrictions on time and cost. Especially, a two stage cluster sampling design is preferred when a strong intra-class correlation exists among observation units. The sample Primary Sampling Unit(PSU) and Secondary Sampling Unit(SSU) size for a two stage cluster sample is determined by the survey cost and precision of the estimator calculated. For this study, we derive the optimal sample PSU and SSU size when the population SSU size across the PSU are di erent by extending the result obtained under the assumption that all PSU have the same number of SSU. The results on the sample size are then applied to the $4^{th}$ Korea Hospital Discharge results and is compared to the conventional method. We also propose the optimal sample SSU (discharged patients) size for the $7^{th}$ Korea Hospital Discharge Survey.

• Journal of Nutrition and Health
• /
• v.17 no.3
• /
• pp.236-241
• /
• 1984

In order to make clear the relationship between sample design and sample survey in community, it was conducted research on sample design for National Nutrition Survey in 1983. In this paper it was tried to analize the data based on The Report of a Settled Population, 1981 conducted by National Bureau of Statistics Economic Planning Board. The sample was basically using stratified two-stage sampling with systematic sampling of Ban or Li as administrative unit. The population represents the whole nation excluding Jeju-do because of budget. The selection of sampling unit and sampling procedure was as follows. 1) Stratify the nation-wide area in 20 sections according to administrative districts. 2) Determine the sample size in each section according to equal proportional rate (1 / 8040) and to about 1,000 households in the sample. 3) Select the 25 sampling units by section according to households proportion. 4) Select the 10 households at random from each Ban or Li according to equal probability proportion as the final sampling unit. Using the procedure, it was sampled 1,000 households for National Nutrition Survey in 1983.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.2
• /
• pp.102-105
• /
• 2016

Objective: The goal of this study was to compare the semen parameters of two successive samples obtained within an interval of less than 60 minutes from patients planning to undergo intrauterine insemination (IUI) whose first samples exhibited low semen quality. Methods: Thirty-two consecutive patients were enrolled in the study. On the day of IUI, the semen analysis of the samples initially presented by all patients met at least two of the following criteria: sperm concentration $<5{\times}10^6/mL$, total sperm count $<10{\times}10^6$, progressive sperm motility (a+b) in the native sample <30%, and total motile sperm count (TMSC) $<4{\times}10^6$. A successive semen sample was obtained no more than 60 minutes after the first sample. Results: Compared to the first sample, the second exhibited significantly (p<0.05) improved sperm concentration, TMSC, progressive motility, and vitality. Regarding TMSC, the most critical parameter on the day of IUI, 23 patients (71.8%) improved it, while nine (28.2%) displayed poorer outcomes. Conclusion: In defined cases, requesting a second successive ejaculate on the day of insemination may result in a high percentage of cases in an improvement of the quality of the sample.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.62-74
• /
• 2015

The purpose of this research is to analyse the process of development and verification of 'National Competency Standards' of Hanbok production, which was carried out in 2013 for the fashion industry. As the result of this research, the definition of the duty in Hanbok production is 'to conduct a series of step-by-step processes of planning and developing fabric and design, then making pattern, cutting fabric and sewing.' The competency unit for Hanbok production is analyzed in 10 categories: analysis of market trends, design plan, production and manipulation of fabric, production process plan, sample making, pattern making, cutting out, sewing, finishing sewing, inspection of the product quality. Competency unit elements of each competency unit are as follows. 1) analysis of market trends: to research market trend resources, to analyse consumers' buying trend, to analyse industry changes, 2) design plan: to develop design, to plan fabrication, to draw flats, 3) production and manipulation of fabric: to develop fabric planning, to prepare fabric manipulation, to conduct fabric manipulation, 4) production process plan: to grasp design, to plan sewing method, to prepare a specification sheet, 5) sample making: to make a sample pattern, to cut sample fabrics, to sew sample, to finish sample making, 6) pattern making: to measure body, to make production pattern, to adjust production pattern, 7) cutting out: to care fabrics, to lay out patterns, to cut out fabrics, 8) sewing: to sew a garment, to sew a lining, to attach a lining, 9) finishing sewing: to neaten edges, to attach trims, to press to finish, 10) inspection of the product quality: to confirm correspondence with the specification sheet, to inspect appearance.

• Journal of the Korean housing association
• /
• v.14 no.3
• /
• pp.41-49
• /
• 2003

An evaluation of the environments in the wandering pathway of the dementia units was carried out. It is revealed that the quality of the environment for the wandering pathway of the sample units was very low. In particular, lacks of social environments in Unit-B and Unit-C, and lacks of orientation aids in all the sample units were shown. Therefore, re-design for the wandering pathway of the sample units is needed. Recommendations for improving the wandering pathway and having appropriate wandering pathway without any abrupt change in existing layout of the sample units were suggested, and the limits of this research is diagnosed. It is also shown that since evaluation categories used in this paper had very closed relationship each other, those evaluation categories can be used in other settings.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.4
• /
• pp.587-597
• /
• 1998

In this study, the Periotest value was measured with Periotest to evaluate precision fit of the 2-unit and 3-unit implant-supported prosthesis by modifying the size and location of ill-fitted conditions. The 2-unit prosthesis was fabricated with the right implant fitted incorrectly and the 3-unit prosthesis with the right and center implant fitted incorrectly. To evaluate the effects of the ill-fitted sizes, 4 groups were divided.:The control group being the accurately fabricated sample group fitted properly. Group 1 was constructed with $40{\mu}m$ ill-fitted conditions, group 2 with $70{\mu}m$ and group 3 with $100{\mu}m$ ill-fitted conditions. The Periotest value was measured at each implant site after tightening 10Ncm. The result was follows : 1. The PTV on the ill-fitted area in the 2-unit implant-supported prosthesis increased as the ill-fitted conditions increased. There was a statistically significant difference among groups(p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05) 2. The PTV on the ill-fitted area of the 3-unit implant-supported with an ill-fitted condition in the right implant increased as the ill-fitted conditions increased. There was a significant difference among groups (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05). 3. In the 3-unit implant-supported prosthesis with ill fitting conditions in the center implant, the PTV on the ill-fitted area demonstrated a statistically significant difference between the control group, group 1 and group 2 (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated significant difference between the gap side and the adjacent side with over $70{\mu}m$ ill-fitted conditions (p<0.05). The results suggest that Periotest is a valuable objective method for evaluating the precision fit of an implant superstructure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.3
• /
• pp.537-543
• /
• 2002

This paper examines a new in-process measurement system for the measurement of micro-defects on the surfaces of brittle materials by using the AFM (Atomic Force Microscopy). A new AFM scanning stage that can also perform nano-scale bending of the sample was developed by adding a bending unit to a commercially available AFM scanner. The bending unit consists of a PZT actuator and sample holder, and can perform static and cyclic three-point bending. The true bending displacement of the bending unit is approximately 1.8mm when 80 volts are applied to the PZT actuator. The frequency response of the bending unit and the stress on the sample were also analyzed, both theoretically and experimentally. Potential surface defects of the sample were successfully detected by this measurement system. It was confirmed that the number of micro-defects on a scratched surface increases when the surface is subjected to a cyclic bending load.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.303-309
• /
• 2020

The populations of Polyphagostarsonemus latus (Acari: Tarsonemidae) have been causing serious economic damages to farmers by directly feeding on leaves of green perilla. However, sampling of P. latus is impossible because there is no suitable sample unit until now. Thus, this study was conducted to suggest suitable sample unit and required sample number for P. latus on green perilla. Individuals of P. latus started to occurr from the leafstalk within a leaf. They required approximated 25 days to spread to all areas within a leaf. New shoots would be a suitable sample unit for P. latus on green perilla because its density on shoots per ㎠ was always higher than the densities on fully grown and moderately grown leaves. Required sample number at D = 0.25 was estimated as a shoot when eggs, nymphs, and adults of P. latus were observed within a leaf. Therefore, Using this small sample unit for sampling of P. latus on green perilla could be economical and efficient.

• Journal of the Korean housing association
• /
• v.17 no.4
• /
• pp.15-24
• /
• 2006

The purpose of this study is to unveil the characteristics of residential space organizations in dementia units. Observation, interview, and drawing analysis of the sample units were used to collect the data for new dementia unit plans. The findings revealed the lack of minimum requirement of residential spaces per person in some sample units, the necessity of consideration of group units, and the change of units based plans to each floor based plans. However, insufficient recreation rooms and the lack of caregivers' resting spaces in the sample units were uncovered. Thus, various recreation rooms such as a reading room, flower room, pottery room, bakery room, or game room should be provided in the sample units. The conclusion is that asylum oriented residential types should be changed to each floor based units having privacy and high satisfaction of residential life. The study of floor oriented residential units focusing on minimum spaces of the floor, space numbers, number of elderly persons on each floor should be studied in the near future.