• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.181-185
• /
• 2005

Silk fibroin (SF) nanofibers were prepared by electrospinning and their application as an enzyme immobilization support was attempted. By varying the concentration of SF dope solution the diameter of SF nanofiber was controlled. The SF nanofiber web had high capacity of enzyme loading, which reached to $5.6\;wt\%$. The activity of immobilized a-chymotrypsin (CT) on SF nanofiber was 8 times higher than that on silk fiber and it increased as the fiber diameter decreased. Sample SF8 (ca. 205 nm fiber diameter) has excellent stability at $25^{\circ}C$ by retaining more than $90\%$ of initial activity after 24 hours, while sample SF11 (ca. 320 nm fiber diameter) shows higher stability in ethanol, retaining more than $45\%$ of initial activity. The formation of multipoint attachment between enzyme and support might increase the stability of enzyme. From these results, it is expected that the electrospun SF nanofibers can be used as an excellent support for enzyme immobilization.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.467-472
• /
• 1997

Porous silicon was prepared by an anodic etching. The pore size was about 10 nm at an etching time of 20 sec and a current density of 20 mA/$\textrm{cm}^2$. The porous layer was composed of an micro-porous layer (0.6 ${\mu}{\textrm}{m}$) and a macro-porous layer (10 ${\mu}{\textrm}{m}$). Room temperature PL with maximum peak 6700$\AA$ appeared. The peak disappeared by an oxidation reaction when the porous silicon was heated to 100~20$0^{\circ}C$ in atmosphere. In order to avoid the oxidation a heat treatment was done in H2 atmosphere. The micro-pore and Si column, which formed quantum well, were collapsed by the high temperature. The PL maximum peak of heated sample was gradually red-shifted and showed about 300$\AA$ red-shift at 50$0^{\circ}C$. The intensity of PL was maintained to high temperatures in lower pressures. The porous Si was carbonized in C2H2+H2 gas in order to increase thermal stability. The carbonization of the porous Si prevented red-shift of the maximum PL peak caused by sintering effect at high temperatures, and the carbonized porous Si showed Pl signal at higher temperatures by above 20$0^{\circ}C$ than the sample in H2 atmosphere.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.300-306
• /
• 2000

In the present studies, we assessed the stability of active components and toxicological safety of irradiated Angelica gigas Nakai(Danggui). In order to confirm the stability of active components in the ${\gamma}$-irradiated roots of Danggui, the quantitative analysis of decursin and decursinol angelate of ${\gamma}$-irradiated sample was carried out by high performance liquid chromatographic (HPLC) methods using reverse phase columns and normal phase columns. From the root of Danggui, decursin and decursinol angelate were isolated by a silica gel column chromatography(toluene : ether (1 : 1), Hexane : EtOAc(15 : 1)). And then the structures were confirmed in the 1H and 13C-NMR analysis. The HPLC chromatograms of decursin and decursinol angelate in ${\gamma}$-irradiated Danggui were similar with those of non-irradiated sample. In the examination of in vitro genotoxicity of the water extract from ${\gamma}$-irradiated Danggui using Salmonella reversion assay(Ames test) and micronucleus test in Chinese hamster ovary (CHO) cells, mutagenicity was not exhibited in the two assays with or without metabolic activation. These resutls suggest that active components in the ${\gamma}$-irradiated Danggui should be stable and that the safety of ${\gamma}$-irradiated Danggui could be revealed in further test in vivo.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.407-411
• /
• 1997

Effects of heating time and storage temperature on the oxidative stability of heated palm oil were studied. Palm oil was heated at $150^{\circ}C$ for 0, 1, 10 or 20 min and stored at 4, 20 or $65^{\circ}C$. The oxidative stability of the sample was evaluated by determining peroxide value of the oil and measuring the volatiles in the headspace of the sample. Significant difference in the peroxide or volatile formation was observed (p<0.05) in heated palm oils between samples stored at 4 or $20^{\circ}C$ and those stored at $65^{\circ}C$. Pentane, hexanal, heptane and total volatiles increased with heating time, while storage temperature did not significantly affect their formation, indicating that heating time played more important role in volatile formation in the heated palm oil than storage temperature. However, adverse results were observed for the formation of peroxide. The interaction effect of heating time and storage temperature on the oxidative stability of heated palm oil was also observed.

• Archives of Pharmacal Research
• /
• v.22 no.3
• /
• pp.288-293
• /
• 1999

Postabsorptive serum iron level was determined after oral administration of the compounds to human. In serum and whole blood, $Fe^{3+}$ was measured by ion chromatography (IC) using a pyridine-2,6-dicarboxylic acid (PDCA) as an eluent. The serum sample solutions were pretreated with I N HCI and 50% TCA. The whole blood sample solutions were treated with 3 N HCI for 30 min at $125^{\circ}C$. The limit of detection (LOD) of the IC technique is $0.2 {\mu}M$ for$Fe^{2+}$and 0.1 $\mu$M for $Fe^{3+}$. The area under concentration (AUC) can be obtained by the above analytical condition. In addition, to compare the stability of $Fe^{2+}$ to that of $Fe^{3+}$ in pharamaceutical preparations, accelerated stability test was carried out. After storing the samples under $40^{\circ}C$, 75%RH in light-resistant container for various time intervals, the contents of iron of different valencies were determined separately by the IC technique and the change and/or the interchange of among those iron species in preparations was investigated. Iron raw materials are stable, but $Fe^{2+}$ in$Fe^{3+}$ source materials was slightly converted to $Fe^{3+}$ by oxidation. $Fe^{2+}$ in$Fe^{3+}$ source raw materials and $Fe^{3+}$ in $Fe^{2+}$ raw materials are determined as impurities. Therefore, IC technique is found to be an appropriate method for comparative evaluation of dissimilar bioavailability of $Fe^{2+}$ and $Fe^{3+}$, stability of $Fe^{2+}$ and $Fe^{3+}$ raw materials and preparations.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.567-574
• /
• 2021

In this study, we evaluated the wound healing rate and, inflammatory cells effects of by Abeliophyllum distichum Nakai (ADN) extract in mice. We also assessed the stability of the ADN extract upon exposure to sunlight. Treatments were as follows: 1) CON (only saline solution), T1 (CON + 0.0125% ADN extract), T2 (CON + 0.05% ADN extract), and T3 (CON + 0.5% ADN extract). A 4 mm punch was used in the central part of the dorsal area to separate it from the subcutaneous tissue, causing a full-thickness skin wound. An amount of 1 mL of each sample was sprayed onto the treatment section of the wound with a pipette every day from the day of wound creation, with proper application ensured using brush. In the stability test, the pH was measured at 1, 4, and 8 weeks after exposing the samples of each treatment section to sunlight considering, the higher concentrations of the ADN extract. The results of this study indicate that the effectiveness of the wound contraction rate in the mice to which the ADN extract was applied was low. Moreover, the stability of the sample containing a high concentration of the ADN extract could not be verified. In addition, no significant results were obtained in the inflammatory reaction assessment. Therefore, additional research focusing on wound contraction, stability, and inflammatory cell outcomes of the ADN extract is needed.

• Journal of Powder Materials
• /
• v.25 no.5
• /
• pp.395-401
• /
• 2018

The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.3
• /
• pp.179-188
• /
• 1991

An HPLC assay method of a drug to be applied to the pharmacokinetic studies of the drug should be completely validated. The validation process for an HPLC assay method in a biological sample was discussed using the data obtained from the development of HPLC method for the simultaneous quantitation of verapamil and norverapamil in human serum. The validation criteria included were specificity, linearity, accuracy, precision, sensitivity, recovery, drug stability, and ruggedness of an assay method.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.547-554
• /
• 2010

In this paper, we extend the work by Lee et al. (2010) to multidimensional di usion processes. A test statistic analogous to the one-dimensional case is proposed to inves-tigate the joint stability of covariance matrix parameters and, under certain regularity conditions, is shown to have a limiting distribution of the sup of a multidimensional Brownian bridge. A simulation result is provided for illustration.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.545-548
• /
• 2004

The paper describes the design of high-speed, high-resolution Sample-and-Hold circuit which shows the conversion rate 80MHz and the power supply of 3.3v with 0.35um CMOS 2-poly 4-metal process for high-speed, high resolution Analog-to-Digital Converter. For improving Dynamic performance of Sample-and-Hold, Two Double bootstrap switch and high performance operational amplifier with gain booster, which are used. and For physical stability of Sample and Hold circuit, reduces excess voltage of gate in bootstrap switch. Simulation results using HSPICE shows the SFDR of 71dB, 75dB in conversion rate of 80MHz result for two inputs(0.5Vpp, 10MHz and 1Vpp, 10MHz) and the power dissipation of 48mW at single 3.3V supply voltage.