• 대한한의학방제학회지
• /
• 제6권1호
• /
• pp.141-156
• /
• 1998

This histological study was performed to investigate the effects of .Paljeungsan-gagambang on the epididymal fat cell size, number and the fat drop area of hepatic lobule of rats fed High Fat Diet. Paljeungsan-gagambang was orally administered to the rats of sample group 26mg per 200g of rat's weight everyday for 4 weeks, and the control group were just fed with equal amount of saline solution. Then they are the epididymal fat cell size, epididymal fat cell numberand fat drop area of hepatic lobule that were measured. The results were summarized as follows; 1. The size of the epididymal fat cell was decreased significantly as compared with the control group. 2. The number of the epididymal fat cells was decreased significantly as compared with the control group in distribution chart classified by cell size 3. The Area(%) of the Fat drops in the hepatic lobule was decreased significantly as compared with the control group. According to the above results, it is considered that Paljeungsan-gagambang have effects on the decrease of the epididymal fat cell size, number and fat drop area of hepatic lobule of rats fed high fat diet; Thus, the adminisrtation of Paljeungsan-gagambang is considered to have an improving effect on obesities and liver diseases caused by high fat diet.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.108-116
• /
• 2003

In this paper, based on the concept of solid particles' sediment problem the working formula determining the bowl length of a Decanter-type centrifuge were derived. Assuming that particles are uniformly distributed along the vertical line of the liquid inlet position, it was possible to derive a constant value k used for determining the bowl length. It was shown from the sample calculations that the bowl length should be increased as the particle size to be removed from the liquid is decreased. The length also should be increased for the same particle size as the bowl diameter is decreased. To help the engineers choose a reasonable bowl diameter, the statistical relationship between the bowl diameter and the capacity of the international products is obtained and presented.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.391-394
• /
• 2013

In this study, nickel-zinc ferrite nanoparticles, with the chemical formula of $Ni_{0.3}Zn_{0.7-x}Cu_xFe_2O_4$ (where x = 0.1- 0.6 by step 0.1), were fabricated by the sol-gel method. The effect of copper substitution on the phase formation and crystal structure of the sample was investigated by X-ray diffraction (XRD), thermo-gravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD result shows that due to the reduction of Zn content,the crystallite size of the sample increased. The results of the vibration sample magnetometer (VSM) exhibit an increase in saturation magnetization value (Ms) for samples with x ${\leq}$ 0.3 and a linear decrease for samples with x > 0.3. The variation of saturation magnetization and coercivity of the samples were then studied.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.625-633
• /
• 2021

This study analyzes the impact of the reward variable on employees' performance through work motivation and employee engagement. This study's specific purpose is to investigate employee engagement's mediating role in the relationship between reward and employee performance. The sample of research is the employee at Sukorejo, Pasuruan Indonesia. The sample is permanent employees at manufacture corporate. The sample size is 150 employees of the total 759 workers through the calculation of the Slovin formula. Respondents in this study were employees with the criteria for having worked for at least last five years. The data obtained is in the form of answers from employees to the statements submitted. The data analysis was used structural equation modeling partial least square. To test the relationship between variables, it was equipped with a Sobel mediation test of statistics. SmartPLS 3.0 is used to help analyze the relationship between variables. The result shows that the reward does not have a direct influence on the performance of employees. However, it has a significant positive effect on the performance of employees through employee engagement. While working motivation variable does not have the role as a mediation variable related to the effect of reward on employee performance.

• 대한지역사회영양학회지
• /
• 제18권1호
• /
• pp.45-54
• /
• 2013

This study was conducted to investigate the physical activity pattern, activity coefficient, basal metabolic rate and energy expenditure of female university students. One-day activity diaries were collected from 95 female university students in Seoul. Body composition was measured by Inbody 720. Subjects spent 7 hr 8min on sleeping, 6 hr 31min on studying, 2 hr 50min on physiological activity, 2 hr 3min on leisure, 2 hr 2min on walking and jogging, 1 hr 58 min on commuting and 22min on house chores. The activity coefficient of these subjects was 1.58. The comparison of body composition of subjects according to PAL showed that body weight, body fat mass, arm circumference and arm muscle circumference of physically active group were significantly higher than those of the sedentary group. BMR calculated by Harris-Benedict (H-B) formula and DRI formula and BMR measured by Inbody 720 was 1375 kcal, 1306 kcal and 1209 kcal, respectively. Total energy expenditure (TEE) examined by one-day activity diaries and calculated by H-B formula and estimated energy requirement (EER) formula in DRI was 2102.1 kcal, 2184.4 kcal, and 2164.5 kcal, respectively. The Pearson correlation coefficient between TEE examined by one-day activity diaries and H-B TEE was 0.795 (p < 0.001) while that between TEE examined and DRI EER was 0.604 (p < 0.001). Overall data indicated that female university students seemed to be less active. Therefore it is recommended that universities develop good exercise programs for their students. Further studies are needed to generate more meaningful results with a larger sample size and using machine attached to the body, which are able to detect physical activity more accurately.

• Journal of Korean Biological Nursing Science
• /
• 제10권2호
• /
• pp.105-112
• /
• 2008

Purpose: The purpose of this study was to investigate the difference in the incidence of diarrhea among the subjects given hypertonic and isotonic nutrients to the nasogastric tube feeding patients in the a critical care setting. Methods: This study is aquasi-experimental study with a pre & post-test design. The sample size of 40 was calculated based on Cohen's formula (1988). The total of 40 subjects who signed the informed consent were randomly selected and divided evenly into two groups, experimental and control group. Results: There are no significant differences between the two groups in homogeneity test (sex, age, albumin level, the use of antibiotics, antacid, and $H_2$ blocker). However, the frequencies of occurrence in diarrhea according to the density of nutrients formulation indicated a statistical difference at the level of .005 (p=.001): diarrhea occurred in four of 20 (20%) of the experiment group, but 14 (70%) of the control group. Also the onset date of diarrhea in the experiment group is later than that of the control group. Conclusion: The research findings suggest that we should begin with low density nutrients for nasogastric tube feeding, and increase its density gradually to decrease diarrhea incidence in the critical care setting.

• 대한한의학방제학회지
• /
• 제17권1호
• /
• pp.75-83
• /
• 2009

Objective : The purpose of this study is to indicate of problems in statistical analysis method of "The Korean Journal of oriental Medical Prescription" and we will be proposed the useful application of the statistical analysis method. Methods : In this paper, we were analysed statistical analysis methodology from published journal articles "The Korean Journal of Oriental Medical Prescription" December, year 2000 to December, year 2008. We were investigated of problems in application of structured analysis methods those journal articles that including statistical analysis techniques and analysis methods. Results : 1. A random allocation of the experimental group and control groups are important factors in the planning process of statistical analysis. However, there are less explanation those journal articles. 2. There are no consideration in specimen size that there will be considerate by the level of significance and statistical test. 3. Many article authors were confused between parametric methods and non-parametric methods that they were applied parametric statistical analysis methods although inapplicable sample size. 4. There were applied the parametric methods consists of t-test instead non-parametric methods in the comparison of average intergroup relations. 5. There were less understanding posterior analysis and were confused with t-test. Conclusion : Our goal was to outline the key methods with a brief discussion of problems(statistical analysis methods), avenues for solutions. we recommend authors to use an appropriate statistical analysis methods for obtaining a more cautions results.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.881-889
• /
• 2021

The purpose of this study is to descriptively reveal the demographic and business profile and personal-entrepreneurial characteristics in Manado, the capital of North Sulawesi, and secondly to associate these profiles and characters to their business progress. A sample size of 21 respondents was drawn - selected from those who warmly welcomed the interviewers for an open-ended structured questionnaire. SPSS 24 has been employed to descriptively reveal the sample distribution according to demographic factors and business entities and to determine the dominant factors affecting the progress of the business by testing the hypothesis on the association of variables under study using specified statistical analytical tools, such as regression analysis, especially stepwise regression formula, between specified dependent variables and independent variables and /or between all variables. The stepwise regression analysis has enabled the researcher to determine which variables are the most important reflecting the personal characteristics theorized as "locus of control": self-efficacy, needs for achievement, personal traits, and barriers to business progress The analysis reveals that the progress of business does have an association and is dependent on the source of capital and education, needs for achievement and locus of control.

• Nuclear Engineering and Technology
• /
• 제13권3호
• /
• pp.121-129
• /
• 1981

많은 기존 공식중 세계의 가장 우수한 최대 유량공식을 찾아, 그 세개의 한계유량공식의 개요와, 냉각재상실사고시 격납용기격리에 실패하는 경우를 특정지을 수 있는 구멍의 크기와 격납용기의 압력 및 온도 등이 주어진 상태하에서 격납용기로부터 외부대기로 방출되는 개략적인 핵분열생성물의 양을 추정하기 위한 계산절차를 제시하였다. 이상기체의 임계유량공식과 이상유(two-phase flow)의 최대유량을 산출하기 위한 무디(Moody)의 도표를 이용하여 계산실예를 제시하였으며, 그 결과를 콘뎀프트-앨티(CONTEMPT-LT) 전산코드의 질량유출공식을 콘버징 노즐(converging nozzle)을 통과하는 음속류(sonic flow)의 경우에 적용하여 산출한 값과 비교하여 보았다. 이리하여 이상 기체의 임계유량공식은 무디(Moody)의 공식이 주는 값과 거의 비슷한 결과를 줌을 입증하였다. 또한 냉각재상실 사고시 격납용기로부터의 유출율을 추정하기 위해서는 콘템프트-앨티(CONTEMPT-LT)의 질량유출공식을 사용하는 것보다 이상 기체의 최대유량공식을 사용하는 것이 더 보수적인 방법임을 보여 주었다.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.182-192
• /
• 1996

In this study, the relationship between wax matrix in lipstick and sweating was investigated by observing the change of size and shape of wax matrix with sweating by Scanning Electron Microscopy (SEM). For observation by SEM, a lipstick sample was frozen in liquid nitrogen, then the oil in the lipstick was extracted out in cold isopropanol($-70^{\circ}C$) for 1-3days. After isopropanol was evaporated, the sample was sputtered with gold, and examined by SEM. When examined the sweated sample by SEM, the change of wax matrix underneath the surface from fine, uniform structure to coarse, nonuniform structure was observed, which was resulted from the caking of surrounding wax matrix. That is, the oil underneath the surface was migrated to the surface of lipstick with sweating, consequently the wax matrix at that region was rearranged into the coarse matrix. In case of flamed lipstick, sweating was delayed and the wax matrix was much coarser than that of unflamed one. Its larger wax matrix at surface region was good for including oil. The effect of molding temperature on sweating was also studied. As the molding temperature was increased, sweating was greatly reduced and the size of wax matrix was increased. It was also found that sweating was influenced with the compatinility of wax and oil. A formula consisting of wax and oil which have good compatibility has a tendency of reduced sweating and increased size of wax matrix. When pigment was added to wax and oil. It was also found that sweating was influenced with the passage of time by observing a thick membrane of wax on surface of lipstick after a month from molding. In case of some lipsticks, the size of wax matrix was altered to bigger or smaller. In conclusion, the structure of wax matrix at the surface region of lipstick was changed with the process of foaming, molding temperature, compatibility of wax and oil, addition of pigment, and the passage of time. In most cases, as the size of wax matrix was increased, sweating was reduced and delayed.